Reviews
I can last three years
In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price.
View detail
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Anyway, it's bright.
The ADDRESS V100 has a reputation for having a dark headlight to begin with. (1994 model) attached to the
I am impressed that I can now see in front of me when driving at night, but in general, the light intensity is just normal.
Still, it is hard to believe that it is +6.5W, and you can feel the difference between just a light bulb and Halogen very clearly.
We do not yet know how durable it will be, and we do not know if the increased power consumption will affect the battery charge.
Well, even if the Battery goes up, you won't be able to leave because the KICK is on.
Its Risk is unknown, but I think it is worth changing it once for V100Owner who has problems with Headlight.
That's how bright it is! V100 is w
View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Fits: HONDA DIOSR, HONDA DIO, HONDA TACT BASIC, HONDA ZOOMER, HONDA SMART・DIO Z4, HONDA SMART・DIO, HONDA STAND-UP TACT, HONDA SUPER DIOZX, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA GORILLA, HONDA CREA SCOOPY, HONDA QR50, HONDA BAJA, HONDA TODAY, HONDA TODAY DELUXE, HONDA CUB PRESS, HONDA MONKEY
No Impossible part
There is no part that is not possible as a Body Cover. View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Fits: SUZUKI ADDRESS V50, YAMAHA Remote controller jog, YAMAHA TOWN MATE80, YAMAHA MATE NEWS 50, YAMAHA JOG TRUNKSpec., YAMAHA SUPER JOGZ, YAMAHA MATE, YAMAHA JOG SPORTS90, YAMAHA JOGSporty, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA AxisTrunkSpec., YAMAHA JOG, YAMAHA Vino, YAMAHA YB50, YAMAHA Axis, YAMAHA PW50, YAMAHA V80MATE50, YAMAHA V80MATE80
Very good for occasional motorcycle rides!
Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.
The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.
Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Clutch outer replacement
APRIO (4jp5) The clutch outer of the "M" was worn and slippery, so I bought it for a replacement.
I had changed only the clutch first, but it started to slip a little when starting off, so I decided it was time to change it.
Inside of Clutch outer (Clutch contact surface) However, the old one was smooth as if it had been mirror-finished, but the new one had the same rough pattern as the surface, so I thought Clutch had a good bite.
I haven't done a test run yet after the replacement, but I don't think it will be a problem since there are no problems with the original running.
Outer clutches are supposed to be replaced when the color of the clutch burns out, so from now on, the clutch and the quantity:I will change it with Set.
View detail
Improved performance with reliable lightweight!
It is definitely lighter than the original and has larger ventilation holes, so it is by far superior in heat management and improves response. I am satisfied with the packaging, finish, performance, and price of the product. Since it is a product from a company with a long history of data, I was able to use it with confidence. Thank you. View detail
This is absolutely necessary!!!
Of all the items I purchased while tuning the B.Wiz 100, this is the item that gave me the most satisfaction. I was very satisfied with both the packaging and the finishing performance of the product. Since the settings can be changed without removing the clutch, the work time was significantly reduced, which gave me great satisfaction. View detail
The quality is excellent
I replaced it after using a Chinese product that was too cheap. I am satisfied with everything from packaging to product finishing and component performance. Detailed settings are also supported with the extra components included. View detail
Stable KITACO
I used it to replace the main jet on my APRIO4jp5.
The OEM-style chamber and High Speed Pulley were running well, but I had to go out for a short distance on a very cold early morning during the New Year's holiday, even though I usually only travel short distances, and my piston started to hug.
I changed to OEM #72→#76 because I thought the fuel mixture was too low because the auto choke was working properly.
Compared to the original sound, the exhaust sound became more bass-like, and we concluded that it was still slightly thinner.
When the PistonCylinder is eventually damaged, we plan to Bore up the PistonCylinder, so this product will be useful in that case as well.
View detail
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
For Bore up premise setting
Bore up assumption, #80-#105 Quantity:I bought the set
The original is #72, so I am trying #80 on it since it is still before bore up.
It is a 4JP5APRIO with High Speed Pulley and is in good shape with no problems.
Since there is a wide range of settings, I would like to use this to get a rough idea of the settings and then refine them a bit more if necessary.
View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail