Reviews
Aging
Used on a HondaTACTA-AF09Courreges TACT85.
I was wondering if there were any parts that would fit since the model is quite old, but I wanted to build it with non-OEM parts, so I bought it.
KM Kikaku Parts has been used on CYGNUS and has been doing well, so we purchased the parts from KM Kikaku, which is famous for its mini bikes, because we thought they would be durable.
There was a little BALI, but it was quickly cleaned up and installed.
I don't know how it feels since it has only been installed for about 100 km, but I think it is large and strong since it is a just fit.
View detail
amazing
With the 80cc big bour kit this is a must have. I have gained 20kmh and gained loads of torque , when i added the 80cc kit i only realy gained touque not more speed, i was a bit dissapointed. but after adding this, I gained speed and did not lossing touque, this is impressive considering i have removed all the plastic boddy parts and replaced them with home made wooden ones. View detail
Commuter Rapid Spec.
This is the second time I have purchased High Speed Pulley.
The last one was NRMagic.
The Slide Piece shattered and damaged the inside of the piece and turned elliptically to replace it.
This time I want to use it with care.
Compared to NRMagic, it feels a little slower at the beginning of the run, but once the speed increases, it doesn't bother me.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
It was Garbage,,, it's Aluminum, so it will be crushed.
I didn't expect the material to be Aluminum...it doesn't say anywhere, so I didn't know what it was and I bought it.
Since it is Aluminum, it is just tightened with the stipulated Torque, but it crushes easily and makes no sense.
I'm crushed when I run after installation and I don't see any difference in acceleration.
I use a lot of KN projects because they are inexpensive and available, but this was Garbage.
View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
Reliability Large Stanley
Replacement of Meter lighting and Pilot bulb for VTR1000F.
The VTR was under total disassembly and was replaced.
I thought about OEM Product, but the price is too expensive for 9 pieces!
Quantities at Reliable Stanley:I bought 1 Set of 10pcs. because it was cheap! 。 No complaints and peace of mind.
View detail
HondaOEMGrip heater
Installed on HA-02 with no problem at all.
Since the Handlebar Cover was attached at the same time, it feels so hot that it is the strongest in the northern part of Tokyo about now.
Is it ok to wear summer Gloves inside for safety?
OEM Product is good for peace of mind.
View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
Made by DAYTONA
[How is it used?
Used to replace front and rear Drum Brake Shoe,
Because the previous Shoe replacement time was unknown and it was not working well.
How was your experience with it?
When Brake was applied with the same sensation as before the replacement, the Rear brake worked so well that it locked up!
How did it compare to other products?
It may not be as effective as a disc brake, but it is as good as a disc brake, and I am very satisfied with the large size.
[Points to note]
Nothing in particular, but beveling of the shoe, cleaning of the drum brake, and grease up are also required prior to installation.
Brake wires, clutch wires, and other parts were also replaced, both front and rear, but it was not a difficult job, as it was started in the morning and finished before noon.
(I'm giving it 4 stars because I'm not sure how durable it will be.)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Beautiful bar ends
I purchased my Daytona Premium Zone handle bar end weights from Webike expecting to receive a 'nice' set of bar weights to replace the bland OEM units from Honda. WOW, these aren't 'nice', they're beautiful! Weighty which is a good thing, but the machining and colour on these is fantastic. Fit is spot on, and changing them over from the stock units is straight forward. I only had them on the bike for a few days and I've had at least three people comment on these items. If you want a little 'bling', these are a must have. Highly recommended, and as usual, Webike is the only team to buy these from, especially for international purchasers. View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Very good Touch!
This is a 2008 ZOOMER.
The mileage was only about 5,000 km and it was still usable, but it started to squeal and work poorly, so I replaced it with a reliable Daytona.
It took some effort to remove the rear tire nut, but I am satisfied with the soft touch and effectiveness.
Durability will be confirmed in the future.
View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Looks cool.
Anyway, since it is a race ish, it is similar to KITACO's discontinued product, but if you put it on CHALY and start off on a slope, high-octane gasoline will leak just a little bit, but I forgive it because it looks cool! View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
A New better Bike
Great product, I i get 10KM extra in top speed abot 80km on down hill no real loss in torque, and much smoother ride at top speed View detail
Performance is top notch!
The Engine is good and spurts out perfectly.
But 3 times more than the price of Normal plug!
Cost performance is the lowest!
The average score between the two would be about 3 points!
View detail
Fits: HONDA Johno., HONDA Giorno/Sporto, HONDA Dio., HONDA diocesan, HONDA TODAY., HONDA Benry., HONDA Benly Pro
periodic replacement
Used for AF62 DIO.
There is no perceptible change after replacement, but it is a regular replacement.
View detail