Reviews
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
The warning volume is smaller than the previous Immobilizer Alarm.
The warning volume of the conventional Immobilizer Alarm (for MONKEY125, etc.) when activated was 122 decibels, which is a large volume and was the center of attention when it was activated in a parking lot, but this product is 95 decibels, which is about the same volume as the Alarm sound of a GShock, and is much smaller. Smaller sound. No one will notice it when it sounds like this. View detail
Fits: HONDA SZ50 Tact Stand Up, HONDA SZ50 Tact, HONDA SZ50 Tact Stand Up, HONDA CR50R, HONDA Crea Scoopy, HONDA CR50, HONDA CR50, HONDA CN50 Tact Ivy, HONDA CHX50 Giorno Crea, HONDA CHX50 Giorno Crea, HONDA CHX50 Giorno Crea DX, HONDA CHX50 Giorno Crea DX, HONDA CHF50S Crea Scoopy SP, HONDA CHF50S Crea Scoopy SP, HONDA CHF50PS Metropolitan II SP, HONDA CHF50PS Metropolitan II SP, HONDA CHF50PA Metropolitan II, HONDA CHF50PA Metropolitan II, HONDA CHF50P Metropolitan II, HONDA CHF50P Metropolitan II
The squeak is Large.
Compared to OEM, Brake works better, but the squeal is Large.
DAYTONA products squeal in the same way, but Vesla's squeal is LARGER.
It would be a good product if it didn't squeak....
View detail
Fits: YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA JOG (JOG), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Giorno・SPECIAL Knife, HONDA Giorno, HONDA Giorno, HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER)
No more squealing at Brake...
Since the Brake Shoe from another company was running low, I fitted NTB's Brake Shoe.
The other company's product that I had before was half as effective, but it was not as good as the one I had before when breaking. "Squeal." But Keeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!" The NTB product has eliminated the squeal.
Instead, the effectiveness of Brake itself was somewhat compromised.
I can't help but think that this area will be TradeOff with price and efficacy.
View detail
Fits: HONDA TODAY, HONDA TODAY, HONDA DIO 4 Str., HONDA DIO4st CESTA
6 months of use
Self-replacement, riding for 6 months, there was a speed increase of about 10km, but at some point, the initial torque did not rise and the vehicle did not move. I do not know, but I returned the parts to the original condition --------------------------------------- ------------------- Self -replacement, riding for six months, and a 10km speed up, but from one point, the early torque did not rise and the vehicle did not go. The vehicle was checked. I'm not sure, but I put it back with a pure part. Powered by Google Translator View detail
Fits: HONDA DIO(4Cycle), HONDA DIO CHESTA, HONDA DIO CHESTA, HONDA TODAY F, HONDA TODAY F, HONDA TODAY, HONDA TODAY, HONDA LIVE DIOZX
High rolling accuracy
Setting was used to change the Coating with MolybdenumSpray before use to prevent uneven wear. View detail
Fits: HONDA TODAY., HONDA SmartDio, HONDA SmartDio, HONDA ZOOMER(Ruckus), HONDA ZOOMER(Ruckus), HONDA TODAY., HONDA TODAY.
When replacing the Exhaust System
[How is it used? Used for ZOOMER
Was the one you received as per Image? Yes
How was your experience with it? no problem
[Points to note] There is none
How did it compare to other products? I think it's a good product.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Good, better than OEM
[How is it used? For ZOOMER
Was the one you received as per Image? high
Was the installation difficult? LargeIt is durable.
How was your experience with it? It is not comparable to OEMs.
[Included Parts:were they on? Yes
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA TODAY, HONDA DIO, HONDA DIO CESTA(4-stroke|carburetor)
one season of exploitation M-FACTOR Mfr Hyper Pulley For Today/New Today
One season of operation showed that the variator is not being finalized. or rather, the belt does not go out to the full radius. The rollers have wear on one side. View detail
Fits: HONDA BENLY (BENLY50), HONDA BENLY (BENLY50), HONDA BENLY PRO (BENLY50PRO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio cesta (DIO CHESTA), HONDA Dio cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Cesta (DIO CHESTA), HONDA Dio Special (DIOSPECIAL Knife), HONDA Dio Special (DIOSPECIAL Knife), HONDA Giorno, HONDA Giorno Crea, HONDA Giorno Deluxe (GIORNO DX), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY), HONDA GYRO Canopy (GYRO CANOPY)
For BENLY50AA05
Purchased because I ran out of Clutch Shoe.
We chose this instead of OEM to shorten the work time.
It's working fine.
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Totally better than OEM
[How is it used? Mounted on ZOOMER
Was the one you received as per Image? Yes
Was the installation difficult? I have been working on the "Mendori etc.," and I have been working on it for a long time.
How was your experience with it? Good feeling
[Included Parts:were they on?
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
Windshield IRIDIUM indeed!
[How is it used?
I've finished the maintenance and adjustment of XR100R, and I'm going to OffRoad course for a test run, so I'd like to check the Engine's condition as much as possible.
I changed from Normal plug to Windshield IRIDIUM to make it better.
How was your experience with it?
Iridium plugs are still good, and the engine blows up better.
It turns agilely at high rpm. I don't pay much attention to it, but it also improves fuel economy.
How did it compare to other products?
It performs well compared to Normal plug.
[Points to note]
Install with care so as not to damage the threads of the plug.
You might want to have a Torque wrench.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
Initial maintenance from Plug
[How is it used?
The XR100R we received was immobile, so we first replaced the Plug for initial maintenance.
It is safer to replace the Plug that was on, as we do not know when it was replaced.
It is also reasonably priced.
How was your experience with it?
I think it is better to replace the plug when the engine is not running well. I will change the number of the Plug depending on the situation.
How did it compare to other products?
I don't know because I only use NGK.
I would like to use otherManufacturers when I have a chance.
[Points to note]
Be careful when tightening the new Plug; Torque management should be done well to avoid damaging the Screw threads.
Other items that would be helpful
Torque wrench would be nice to have.
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
The price is low, but …,.
The price is quite cheap and it is durable, but the braking power and Brake squeal in the rain are terrible.
I don't think there is a Repeat.
View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
Recommendation to the Carburetor setting of the Tuning engine!
[How is it used?
Usually Iridium plugs are used to produce basic setting when carburetor, Exhaust System, Bore up, etc. are custom made.
We purchased this Plug, which has one of the highest heat values, to use as a standard.
Was the one you received as per Image?
It is the usual Plug, so it is as per Image.
Was the installation difficult?
It is easy to replace with Plug wrench.
However, Torque wrench is recommendation because the Washer will be crushed if it is removed and used many times.
How was your experience with it?
One Up in the heat value of the Plug does not change the Large width, but it is like an insurance policy in case of an emergency, considering the heat of the Engine.
Also, I don't think a heat value of 7 is necessary unless it is a Tuning engine.
[Included Parts:were they on?
Nothing else special.
[Was there anything that disappointed you?
Not particularly
Compared to Iridium plugs, the electrodes can be revived by rubbing with Brush when they are covered, so even a little rough handling is not a problem.
▼If you have a Plug with different heat value as Stock, you can adjust it according to the temperature and Tuning, so you can recommend it.
View detail
Fits: YAMAHA YFM80W, YAMAHA YFM50, YAMAHA YFA125, HONDA CB250, HONDA CB250 LACustom, HONDA ATC70, YAMAHA YFA-1BREEZE, YAMAHA TT-R125LWE, YAMAHA TT-R50E, YAMAHA XTZ125, YAMAHA XVS125DRUG STAR, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA YF100M, YAMAHA YF80M, YAMAHA YFA-1, HONDA XLR80R, HONDA XL80S, HONDA TRX70, YAMAHA RENAISSA
Used as Plug for Tuning engine!
[How is it used?
I purchased this Plug, which has one of the higher heat values, for use in EngineFull tuneCustom vehicles such as carburetor, Exhaust System, and Bore up.
Was the one you received as per Image?
It is as per Image since it is a Plug that I am familiar with on a regular basis.
Was the installation difficult?
It is easy to replace with Plug wrench.
How was your experience with it?
To be honest, we cannot expect power up only from the heat value of the Plug, but it is like an insurance policy considering the heat of the Engine.
I also believe that the Tuning engine must be used to get the true Performance.
[Included Parts:were they on?
There is nothing else.
[Was there anything that disappointed you?
Not particularly
Iridium plugs are a bit more delicate than normal plugs because they cannot be brushed to restore the electrode when covered.
▼It would be good to have Iridium plugs with different heat values as Stock, so that you can easily change them depending on the temperature and Tuning.
View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, HONDA CB250RS, HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F
It chose by appearance. A portion black when grasping is collapse.
It chose by appearance.
A portion black when grasping is collapse.
View detail
Fits: Others , HONDA Giorno, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA MAGNA 50, HONDA JOKER90, HONDA JOKER Helmet, HONDA GIORNO CREA, HONDA GIORCUB, HONDA DREAM50, HONDA DAX, HONDA Byte, HONDA TODAY, HONDA TODAY
It was attached simply.
It was attached simply. View detail
Fits: HONDA little cub, HONDA little cub, HONDA little cub, HONDA MAGNA50, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA JOKER Helmet, HONDA JOKER90, HONDA DAX, HONDA TODAY, HONDA TODAY, HONDA DREAM50, HONDA Byte
It attached to the white giorcub. It is touch that the color may be unified. Although the color of the bulb was in sight for a while, I was seldom worried. When worrisome, I think whether it is also good to LED-ize.
It attached to the white giorcub.
It is touch that the color may be unified.
Although the color of the bulb was in sight for a while, I was seldom worried.
When worrisome, I think whether it is also good to LED-ize.
View detail
Fits: HONDA little cub, HONDA little cub, HONDA little cub, HONDA MAGNA50, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO CREA, HONDA GIORNO CREA, HONDA JOKER Helmet, HONDA JOKER90, HONDA DAX, HONDA TODAY, HONDA TODAY, HONDA DREAM50, HONDA Byte
It attached to the white giorcub. Color was unified and it is [ it feels and ] easy to come out. Although the color of the bulb was in sight for a while, I was not worried so much. Probably, it is also good to LED-ize, when worrisome.
It attached to the white giorcub.
Color was unified and it is [ it feels and ] easy to come out.
Although the color of the bulb was in sight for a while, I was not worried so much.
Probably, it is also good to LED-ize, when worrisome.
View detail
Fits: HONDA Broad (BROAD), HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CB400 Four (Four-), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR)
Horn normal in a good way.
Replaced because it was rusted and no longer useful.
It's compatible and Universal, but it's also very practical because it sounds decent.
It's not expensive, so it's helpful.
good point
It is easy to install.
It is also safe because it has a decent sound and Large size.
A bad point
It may be easy to rust.
Horn is not something that is rarely sounded, but when it comes time to use it, you don't want it to not work, so it is better to Check it.
View detail