Reviews
Just receive item
Second time order from webike..the quality of packaging still tip top for me with the bubble plastic and so on..well order again in future..thank you View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
It's perfectly normal
I used it on my MAJESTY125
The MotorcycleBROS specification table lists a different Plug, but this is the correct one, so please be careful if you are buying!
It is a Normal plug, so it is quite normal, but since it is NGK, it is still very safe.
I'm going to Repeat it again.
View detail
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Genuine Yamaha Seal for TMAX
This was a replacement fuel tank seal that was needed for the TMAX I had in from a customer. There was a small tear in the seal which was casued by user error. No point in messing around with sealant when you can just buy a genuine Yamaha one cheaply like this. Finding the right seal was super easy using the tools Webike provide in their help section and then cross referencing with Yamaha schematics. The price was really cheap which did surprise me and it was a lot better value than sourcing locally. The seal and some other parts were all shipped using my chosed courier, who is EMS. My order arrived in perfect condition in 5 dayas from being shipped. The seal came in the standard yamaha packet and was inside a bubble wrap envelope to keep it safe. The seal itself is a moulded part as this needs to be pertty exact to make a good seal. It is less flexible than I thought it would be but that is not a bad thing at all. It serves its purpose and that is what is needed for the fuel tank. Fitting was easy after removing the fuel cap by the small screws. Refit and that was it. Nicely sealed fuel tank once again. Thanks Webike, very impressed. View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Plug replacement
Replaced the original old C7EPlug with no problems.
I'm not sure if it improves starting or fuel economy.
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Excellent pads
About quality and texture
The brake pads were chosen for Yamaha Vino; this brand has already been tested more than once in harsh urban braking conditions, so the choice immediately fell on them
The quality of the linings is high, they are dust-free, even after 5000 kilometers there is a minimum of brake dust in the drum
The glue is not visible, but there is enough of it, the sizing is very good
About the feeling of use
Operation on the next scooter showed its best side, braking is effective, even though it is a drum brake
With the correct cam setup, the brakes grab instantly and hold the wheel perfectly when pressed hard.
The average service life is about 10-15 thousand in urban conditions with frequent braking
Products to buy together
The kit includes everything you need, brake pads and springs
Difficulty of installation
Easy installation, you need to remove the muffler and rear wheel, then replace the pads
Cost performance and comparison with other products
Low cost compared to the original, and the braking quality is approximately 1.5 times higher
About shipping and packaging
Excellent blister packaging, no damage during delivery
Any concerns, cautions, or advice when purchasing
I can only recommend this product, already tested with three scooters ---------------------------------------- ------------------ About Quality and Texture The brake pads were chosen for Yamaha Vino, this brand has already been tested more than once in hard urban braking conditions, so the choice immediately fell on them The quality of the linings is high, they are unbearable, even after 5,000 kilometers in the drum minimum brake dust Glue is not visible, but it is enough, the gluing is very good ABOUT THE FEELING OF USE Operation on the next scooter showed itself from the best side, braking is effective, although it is a drum brake With proper tuning the fist, the brakes are grasped instantly and hold the wheel perfectly with a strong press The service life of an average of about 10-15 thousand with urban conditions with frequent braking Products to Buy Together The kit has everything you need, brake pads and springs Difficulty of Installation Light installation, it is necessary to remove the muffler and rear wheel, then replace the pads COST Performance and Comparison with Other Products Low cost compared to the original, and the quality of braking is about 1.5 times higher ABOUT SHIPPing and PACKAGING Great packaging in a blister, damage during delivery is not Any Concerns, Countions, or Advice When Purchasing I can only advise this product, already tested by three scooters Powered by Google Translator
View detail
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: SUZUKI K50, SUZUKI K80, SUZUKI Birdie90, HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie80, HONDA BENLY PRO, YAMAHA Axis Treat, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA YSR50, YAMAHA VOX, YAMAHA YB50, YAMAHA V80MATE80, YAMAHA V80MATE50, YAMAHA TZ80, YAMAHA TDR80, YAMAHA TZ50, YAMAHA TDR50, YAMAHA FZ50
I wanted a camouflage Motorcycle Cover.
[How is it used?
Used for KSR-II.
It is kept in Garage, but the reality is that it is not a fashionable thing called Garage. Garage and workshop. It is reasonable to say that dust and dirt are falling on motorcycles that have not been ridden for a while....
I purchased the Motorcycle Cover to improve the current situation where the first thing I do when I start to ride my motorcycle, which is supposed to be kept indoors, is to wash it.
Did you receive the item as per the Image?
I have purchased 3L/4L Size and L Size of this product in the past, and they have been used on SV650, SEROW, LITTLE CUB, etc., respectively, and have been very useful. I usually buy 1~2Size Large size body cover, but this time, I bought a 3L/4L Size and L Size body cover, which are listed on the back side of the box. Size appropriate for KSR-II." I purchased the M Size which is
I personally like camouflage patterns, so I searched all over Webike for this product and chose it.
How did you like it?
The reason why I had purchased the Large size is that I had been using it for a vehicle with a Rear box and a front basket. Bare bones. I purchased the M Size as specified for the proper size because it is used for a vehicle with a
when covered with Just fit." I will probably buy the M size again next time because I don't plan to do any more customization or rear box installation, etc. on this vehicle.
As I mentioned above, I use it for vehicles stored in Garage, but the fabric is thin, so I feel that the durability and weather resistance are a bit stiff if the vehicle is stored in the sun, such as on a bicycle parking lot.
[Points to note]
It is a thin fabric, labeled 100% Polyester, so you may want to consider replacing it after around one year if used outdoors.
Also, when the Engine or Exhaust System is hot, it is stated that it should be used only after the system has cooled down sufficiently.
How did it compare to other products?
Camouflage-colored body covers used to be sold by several companies, but recently they have become scarce, perhaps due to lack of demand.
Among them, Mr. Uniker has Green Light camouflage and Color:I can only be thankful that they have S Size to 8L for each of the two color variations of Gray camouflage.
Other items that would be helpful
Point and hang of installation
Not for use on vehicles at high temperatures.
Since the Motorcycle Cover is not strongly appealing to durability and weather resistance for its price, it may last a little longer if it is stored indoors or in the shade when not in use to avoid unnecessary ultraviolet rays.
similar to the above Heat resistant, durable, weather resistant If you are looking for a more expensive Body cover, consider a more expensive Body cover.
[ITEMS TO BUY TOGETHER
If theft prevention is also a consideration, purchase a strong Motorcycle locketc. to enhance theft protection.
[Opinions and requests to Manufacturer
We would be very grateful for two different color variations, but we would also appreciate it if you could add sand camouflage pattern, marine camouflage pattern, etc. to the lineup to make the garage even more colorful.
View detail
OEMExhaust System had a hole in it, so it was replaced.
I got a Yamaha VOX50 from an acquaintance and while servicing it, I found a hole in the OEM exhaust system, so I decided to replace it. I was looking for a custom exhaust system and found one that was reasonably priced and looked good, so I bought it. I was satisfied with the volume and sound quality. View detail
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
Genuine Yamaha O-Ring for VINO 50 CLASSIC
This was a small O-ring that was needed for the Vino 50 that was in teh shop. The original was really bad and had started to split. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in teh box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted within a couple of minutes. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for this area. Great service Webike, thank you very much View detail
Low cost Low Bright
To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail
Fits: YAMAHA 50X (YW50FXL), YAMAHA 50X (YW50FXW), YAMAHA C3 (XF50AW), YAMAHA C3 (XF50W), YAMAHA C3 (XF50XL), YAMAHA C3 (XF50XR), YAMAHA C3 (XF50XW), YAMAHA C3 (XF50YR), YAMAHA C3 (XF50YS), YAMAHA C3 (XF50ZB), YAMAHA JOG (CG50A), YAMAHA JOG (CG50B), YAMAHA JOG (CY50D), YAMAHA JOG (CY50E), YAMAHA JOG (CY50F), YAMAHA JOG (CY50G), YAMAHA JOG (CY50H), YAMAHA JOG (CY50J), YAMAHA JOG (CY50K), YAMAHA JOG (CY50L)
Genuine Yamaha Ball Race 1 for Vino Classic 2004
This little scooter came into the shop with some major steering issues. Due to the age of the bike I decided to do a full fork strip down including the head, bearings, races etc. When I got really inside and saw exactly what the problem was. Basically all the races were shot, the bearing was pretty nasty and some of the fittings had been totalled beyond any reasonable repair. I decided the best course of action was to simply replace all the parts that were either not great or done for. Finding the correct parts for this job was not super hard as I just used the help pages and links Webike provide. Then I cross referenced with Yamaha schematic for the bike model to make sure. I had a few other parts in the order and got them all shipped together to save a little money and time so they all arrived at the same time. EMS is the courier I use these days as they just get your order to you pretty fast. 5 days fropm shipping and my order arrived in 100% perfect condition. All the parts came in the standar Yamaha packets and were really well packaged. The race has a good finish in silver and the race has been well moulded. I doubt these are cnc'd anyway. The fit is perfect, the bearings were well greased so this race went into place easily. Now to add the other parts to finish off this build. Great job Webike, very happy customer View detail