Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .

Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail

The size is just right and the texture is good.

Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner. View detail

Sintered and Pad as OEM

The OEM pad for RG400/500Γ is out of stock and we are looking for a Sintered pad similar to the OEM one. The Sintered Pad is considered to be valuable because there are almost no Sintered Pad made by other companies. View detail

Excellent quality.

I installed it on my gsxr750rjk. I am happy with the lightness, design, ease of viewing and adjusting everything. The price is high! View detail

It works without any problems.

Replaced at the same time as Chain.
After the replacement, I do not notice any change, but it seems to be working fine. View detail

Suitable for highways, sluggish in town

The front sprocket does not loosen unless the Impact wrench is turned at the maximum Large Power to install it. From the next time, it can be turned manually.
Also, if you do not take the Bracket on the Cover of the Sprocket, the Cover will not be attached.
The Metropolitan Expressway and the Tomei Expressway are not different.
The start of the road down the road is sluggish and doesn't fit.
(Normally, up to 16T would be good.)
Quantity assuming Fuji Speed way:Set, so will try in April.
On the other hand, we plan to try 14T in Tsukuba and other areas. View detail

Filler cap

The engine area is black and the GoldCap is accented with Accent. View detail

Purchased due to Headlight Bulb running out

I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.

It's also inexpensive, so it's helpful. View detail

It looks better now.

I put it on because it stands out from the OEM. View detail

Dress-up??

I wanted Accent and I bought it.
I was torn between Gold and Red until the end,
The Engine part was Bronze, and it was Gold.
I think it was the right decision.

Self-sufficientParts, but I'm glad I got it. View detail

Good variety of color variations

Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well. View detail

It was the best Size for W800.

I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect. View detail

Gamma's OEMChamber requires 4

[How is it used?
RGV250Γ (VJ22A) The new one was replaced with a new one for the ChamberMaintenance of the

How was your experience with it?
This was the first time for Gamma to install and remove chambers, but the description said that 4 chambers were required, so I purchased 4 chambers as described.
One SideQuantity on the Flange side and the Engine cylinder side between the chambers:2pc. I used 4 of them for sure because I need Set.
I installed it with a light Gasket and so far it is working fine with no exhaust leaks.

How did it compare to other products?
It was not particularly good or bad.

[Points to note]
At first, it is difficult to install because the direction of installation is upside down!
It is better to stick with liquid Gasket and replace it. (Large strange to take it later, though).

【Review】
It was cheaper than OEM and functionality was fine.
For OEMChamber, 4 pieces are required, but for external chambers, it is usually Quantity:2pc. Set, or maybe even none. View detail

ALCAN hands iGrip

I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail

I knew this was easy to use.

The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.

It is easier to have a belt sewn to the cover to prevent it from being rolled up.

The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle. View detail

It's worth the price

I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail

Enough

After cleaning the rear caliper, we found that the pad on the body side was unevenly worn, which led to an unscheduled pad replacement.
Since the cause of the uneven wear was not clear, we decided to see how it would look after checking the installation by rubbing out the piston. I was looking for a cheaper pad than Mega alloy, but one that would work well, and I decided to purchase this one, which seemed to work well at a relatively low price, based on reviews.
After the replacement, I went on a one-day touring trip and drove about 300 km on mountain passes, etc. I had no particular complaints about the effectiveness of the rear brake, and I was able to control the car during cornering, etc. It was not obviously inferior to the Mega alloy. The pad seems to hold up well, so I have high expectations for it as well.
Brake Discs seem to be more aggressive, but I think this area is either for Brake effectiveness or to reduce disc wear. I prefer the effectiveness of the brake disc, so I think that I can replace the disc when it reaches its limit.
This time, since the cause of the uneven wear of the pad was not yet known, we had to choose a pad with a low cost, but we were able to find a pad that demonstrated satisfactory performance, and we believe that we made a good purchase. View detail

Nice genuine SBS street sintered pads for GSX-R1100 1987

Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would try the street excell sintered ones. Finding the correct part for fitment was pretty easy as I visited SBS website and put my model details in. Webike had these in stock and so ordered 2 sets with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days.All was packed really well and did not move during transit, no damage at all. The pads came in their own SBS branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are sintered you can see teh different materials in the pads themselves, I do believe they have a higher than normal high heat resistance. I have not fitted them yet but that will be in the next few weeks. So far though, they look pretty good. Lets hope they perform as they should. View detail

I wanted Cap.

I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.

The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.

This would have been unnecessary if caps in a variety of colors were available, but they are not.

Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed. View detail

Power cable & elect. module Dev'moto

Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail