Reviews
Control voltage is too high.
After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!
Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all...
View detail
Good quality front fork dust seals!
These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail
Punching in as is
As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.
I don't know about durability so far.
View detail
As expected of Nisshin, the braking power is also GOOD!
LEAD110 (JF19) I tried it out for the first time. I feel that the braking force and touch are better than those of the Normal pad, and the price is cheap and cost effective. I don't know about durability in the rain yet, but Caliper is also Nisshin, so I think it might be a good match.
I think the performance is sufficient for a Small Type Scooter.
View detail
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Quantity with high grip tire because it works well.:Set Exchange is a Recommendation
It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.
The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)
I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good.
View detail
No problem, but...
Coupler is a little bit small and a little bit tight.
At first I thought I had the wrong part number because it didn't fit.
View detail
It's cosy.
I think the quality is the same as OEM etc. I don't know about durability yet. View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
In the 90ccClass CUB
Select OEM designation for CUB + 1st Up.
88ccetc.Bore up and you'll be first up for now.
Quantity since it is covered during Setting anyway.:I may buy 2pcs or so.
You there! After you get some Carburetor setting, you should put in Windshield IRIDIUM or some other expensive Plug!
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Spacey 125, HONDA Super Cub 70, HONDA Super Cub 90, HONDA DIO Series, HONDA Super Cub 50, GILERA RUNNER VXR125, GILERA RUNNER VXR200RST, GILERA RUNNER ST125, GILERA RUNNER ST200, HONDA Lead 90, SUZUKI Let's II, SUZUKI Let's 4 Palette, SUZUKI Let's IIG, SUZUKI Let's 4, SUZUKI Let's 4 Basket, SUZUKI Birdie 50, SUZUKI Birdie80, SUZUKI Birdie90, SUZUKI Address V50, SUZUKI Address V50 G
Used for LETS II with CarrierCase. Second purchase.
[Durability]
Used in a covered carport for about 2 years.
The side-view mirror area that is exposed to direct sunlight was torn; the area where the tire is exposed has rubber, but this area was not torn by pulling.
Considering the price, I have the impression that the durability is not that great.
[Fit feeling]
The length seems a little short, but since there is no ventilation, I think it is a reasonable size considering the breathability.
Ease of installation
The side with the wheel lock hole is on the front wheel side, so it is easy to see the front and rear when applying the cover.
Buckle type is easier to use.
View detail
Fits: Others , SUZUKI LETS4 Barrett Basket Model:JBH-CA43A, SUZUKI LETS 5G Model:JBH-CA47A, SUZUKI LETS 5 Model:JBH-CA47A, SUZUKI ADDRESS V50G Model:JBH-CA44A, HONDA LEAD100 Model:EBJ-JF19, SUZUKI ADDRESS V50 Model:JBH-CA44A
exchange
I bought it because the bulb was out.
It is a part that is not often replaced.
The brightness is sufficient and I am satisfied.
View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail