Reviews
Fits: HONDA LEAD125, HONDA LEAD110, HONDA LEAD110 EX, HONDA BENLY50110, HONDA BENLY50110 PRO, HONDA BENLY50 PRO, HONDA BENLY50
Okay!
It works well even for my 110kg fat self! View detail
Easy!
It can be used for both navi110 and PCX150. It is cheap and not bad. I guess it's not so bad, but it's not that bad. View detail
As expected of Nisshin, the braking power is also GOOD!
LEAD110 (JF19) I tried it out for the first time. I feel that the braking force and touch are better than those of the Normal pad, and the price is cheap and cost effective. I don't know about durability in the rain yet, but Caliper is also Nisshin, so I think it might be a good match.
I think the performance is sufficient for a Small Type Scooter.
View detail
good price product
I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product.
I am very satisfied and intend to purchase again in the future.
I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product. I am very satisfied and intend to purchase again in the future. I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. Powered by Google Translator
View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail
Fits: HONDA Spacey 125, HONDA Super Cub 70, HONDA Super Cub 90, HONDA DIO Series, HONDA Super Cub 50, GILERA RUNNER VXR125, GILERA RUNNER VXR200RST, GILERA RUNNER ST125, GILERA RUNNER ST200, HONDA Lead 90, SUZUKI Let's II, SUZUKI Let's 4 Palette, SUZUKI Let's IIG, SUZUKI Let's 4, SUZUKI Let's 4 Basket, SUZUKI Birdie 50, SUZUKI Birdie80, SUZUKI Birdie90, SUZUKI Address V50, SUZUKI Address V50 G
Used for LETS II with CarrierCase. Second purchase.
[Durability]
Used in a covered carport for about 2 years.
The side-view mirror area that is exposed to direct sunlight was torn; the area where the tire is exposed has rubber, but this area was not torn by pulling.
Considering the price, I have the impression that the durability is not that great.
[Fit feeling]
The length seems a little short, but since there is no ventilation, I think it is a reasonable size considering the breathability.
Ease of installation
The side with the wheel lock hole is on the front wheel side, so it is easy to see the front and rear when applying the cover.
Buckle type is easier to use.
View detail
FOR CB250F
I am happy to work with the webike team.Actually this item i could not found in my country (Mark, Drive Caution 87560MY1701). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail
having great efficacy
[How is it used?
Installed on a PCX125 JF56 with 30,000 km on the odometer, I replaced the Brake Shoe when I refreshed various parts.
It was not reduced enough to replace it at a glance, but I replaced it, so it is safe for the time being.
How was your experience with it?
Since I did not prevent the squeal, there is a dragging cue sound every time I do the Rear brake, but I think it can't be helped for the time being.
I thought there would be no difference between the OEM and the Rear brake, but I'm glad I made the change.
I also don't know how durable it is, so I gave it 3 stars.
It looks cool, and although it is a part that you can't see, it was nice to have the feeling that it was replaced.
How did it compare to other products?
I've only used OEM, so I don't know that much, but as mentioned, the efficacy has definitely improved.
[Points to note]
You should squeal!
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI K50, SUZUKI K80, SUZUKI Birdie90, HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie80, HONDA BENLY PRO, YAMAHA Axis Treat, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA YSR50, YAMAHA VOX, YAMAHA YB50, YAMAHA V80MATE80, YAMAHA V80MATE50, YAMAHA TZ80, YAMAHA TDR80, YAMAHA TZ50, YAMAHA TDR50, YAMAHA FZ50
I wanted a camouflage Motorcycle Cover.
[How is it used?
Used for KSR-II.
It is kept in Garage, but the reality is that it is not a fashionable thing called Garage. Garage and workshop. It is reasonable to say that dust and dirt are falling on motorcycles that have not been ridden for a while....
I purchased the Motorcycle Cover to improve the current situation where the first thing I do when I start to ride my motorcycle, which is supposed to be kept indoors, is to wash it.
Did you receive the item as per the Image?
I have purchased 3L/4L Size and L Size of this product in the past, and they have been used on SV650, SEROW, LITTLE CUB, etc., respectively, and have been very useful. I usually buy 1~2Size Large size body cover, but this time, I bought a 3L/4L Size and L Size body cover, which are listed on the back side of the box. Size appropriate for KSR-II." I purchased the M Size which is
I personally like camouflage patterns, so I searched all over Webike for this product and chose it.
How did you like it?
The reason why I had purchased the Large size is that I had been using it for a vehicle with a Rear box and a front basket. Bare bones. I purchased the M Size as specified for the proper size because it is used for a vehicle with a
when covered with Just fit." I will probably buy the M size again next time because I don't plan to do any more customization or rear box installation, etc. on this vehicle.
As I mentioned above, I use it for vehicles stored in Garage, but the fabric is thin, so I feel that the durability and weather resistance are a bit stiff if the vehicle is stored in the sun, such as on a bicycle parking lot.
[Points to note]
It is a thin fabric, labeled 100% Polyester, so you may want to consider replacing it after around one year if used outdoors.
Also, when the Engine or Exhaust System is hot, it is stated that it should be used only after the system has cooled down sufficiently.
How did it compare to other products?
Camouflage-colored body covers used to be sold by several companies, but recently they have become scarce, perhaps due to lack of demand.
Among them, Mr. Uniker has Green Light camouflage and Color:I can only be thankful that they have S Size to 8L for each of the two color variations of Gray camouflage.
Other items that would be helpful
Point and hang of installation
Not for use on vehicles at high temperatures.
Since the Motorcycle Cover is not strongly appealing to durability and weather resistance for its price, it may last a little longer if it is stored indoors or in the shade when not in use to avoid unnecessary ultraviolet rays.
similar to the above Heat resistant, durable, weather resistant If you are looking for a more expensive Body cover, consider a more expensive Body cover.
[ITEMS TO BUY TOGETHER
If theft prevention is also a consideration, purchase a strong Motorcycle locketc. to enhance theft protection.
[Opinions and requests to Manufacturer
We would be very grateful for two different color variations, but we would also appreciate it if you could add sand camouflage pattern, marine camouflage pattern, etc. to the lineup to make the garage even more colorful.
View detail
Genuine Honda Air Filter for LEAD 110
This was another part that needed changing on the Lead 110 bike that came in for a service. The air filter was pretty bad and very dirty which was only having a negative effect on the bike's running. The correct air filter was easy to find using the tools and help section on Webike pages. I also cross referenced with Honda schematics for my own peace of mind. The air filter was really good value and slightly cheaper than I could source locally at my nearest Honda parts dealer. I chose EMS for my courier as they just get my orders delivered fast. 5 days from shipping my order arrived. Everything in the order was extra well packed with bubble wrap for security. The air filter is not a massive one especially for such a small bike but you do need it to fit as it should. The old one had gotten a little funny shaped asn was not sitting right. This one however, fits perfectly. The air filter came in the usual Honda packaging. Fitting is easy, the filter is not doing what it is supposed to do and the bike does sound better for it. Brillaint work Webike. Happy customer. View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
HondaOEMGrip heater
Installed on HA-02 with no problem at all.
Since the Handlebar Cover was attached at the same time, it feels so hot that it is the strongest in the northern part of Tokyo about now.
Is it ok to wear summer Gloves inside for safety?
OEM Product is good for peace of mind.
View detail
Fits: YAMAHA Cygnus 125X SR, YAMAHA Cygnus 125X, YAMAHA Cygnus 125, YAMAHA Grand Axis, YAMAHA Axis Street, YAMAHA Axis 90, SYM RV180JP, SYM RV125JP, SUZUKI Vexter 150., SUZUKI Address V125S, SUZUKI Address V125G, SUZUKI address V125, SUZUKI Address V100, PIAGGIO Runner 200VXR, KYMCO XCITING250, KYMCO GRAND DINK250Z, HONDA Lead 50, HONDA Lead 90, HONDA Lead EX, HONDA Lead 110.
Used with CROSS CUB50
CROSS CUB50 with 40? box and Size is just.
The quality is, well, in line with the price, and I have no complaints.
Easy to use with no Floppy with cords and ties to hem.
View detail
Fits: HONDA SPACY100, HONDA SPACY125, HONDA LEAD110, HONDA LEAD50, SUZUKI ADDRESS V100, SUZUKI ADDRESSV125, Vespa PESPA 125, YAMAHA AXIS 90, YAMAHA CYGNUS 125, YAMAHA CYGNUS 125SR, YAMAHA CYGNUS 125X
Size don't fit in SUPER CUB with box!
Since we installed a box on the CUB, we replaced the Cover with a Size one that can also be used with a box.
I am happy with ExactlySize on a CUB110 with a 32 liter capacity box from GIVI.
As others have mentioned, it is a little minus that the fabric is thin and rainwater will pass through.
However, we feel that it is sufficient for the purpose of preventing degradation of resin parts due to UV rays.
Above all, considering the price, I have no complaints!
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail