Reviews
Sunstar Chain and Sprocket
Paired this together with the SUNSTAR Chain 520 Gold and Rear Sprocket Duralumin. Its better than the stock. Riding felt different when installed View detail
Lever exchange is good.
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Wind protection for now
It is inconspicuous and has a good OEM texture, so I put it on for now to protect against wind at high speeds. View detail
High speed Wind protection
For high speed wind protection, not too large and good texture for OEM. View detail
Fits: HONDA CT125, HONDA GB350, HONDA GB350S, HONDA CB400 SUPER FOUR, HONDA CB1100, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1300 SUPER FOUR, SUZUKI V-STROM 250, SUZUKI SV650, SUZUKI SV650X
It is easy to install. (by SuKill) Firmly equipped
Installed on CT125CT110 HUNTER CUB.
I had a hard time pulling out the OEMBar End, though,
The stability of the installation is perfect and satisfactory.
If Protector is also equipped separately, it can be used in a reasonable way.
Windshield effect is also obtained, and customization is also possible.
The high price is also a Point.
Universal Type for other car models
So I want to use it for other Motorcycle.
View detail
It's just a piece.
It looks beautiful around the key box.
Once you put it on your bike, you'll want to put it on all the bikes you own.
It also prevents scratches on the key box.
View detail
I put it on ADV160.
I installed it on an ADV160, although it is not a fit.
It is attached by simply extending the Bolt hole to 8mm.
Horns are located in places where you have to look closely to see them, so it is a good Accent, albeit a self-satisfying one.
View detail
Even if it looks good….
I noticed after I bought it that it looks good, but it doesn't have a Level gauge! I like the look of the Parenthesis, but I'm not sure if it's a good idea.
When we check the amount of Oil, we'll see if there's a problem with the replacement.
View detail
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Stylish and easy to apply
Simply attach with the special double-sided tape.
But I wish they had put it on the product side from the beginning...
The product is small, so it is a little difficult to hold when applying it to the Motorcycle side.
View detail
Quantity:Set is convenient
Quantity so you don't get lost when buying.:Set sales are very convenient View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Generally satisfied, although there are reasons for the low price.
The DAYTONA WaterRegistrant I was using on my 2019 Z1000 is now over 4 years old and falling apart from the quicksand, so I decided to try a different Manufacture next.
The evaluation is based on the comparison with DAYTONA's Cover, but the large size of the Cover can fit in the LLSize Z1000.
The material is a bit flimsy, and it is hard to say how durable it will be until it is used for many years, but I have the impression that the price is appropriate in this area.
The front and rear cover has the same locking holes, but the front wheel hole is much closer to the front, so you have to lock it at the very front.
I think it is good that there is an air hole to release moisture in the Mirror section, which was not available in DAYTONA. When it rains, the humidity inside the Cover unexpectedly rises, and since it cannot escape, the inside gets wet too.
In general, the quality of the product was generally satisfactory for this price with good cost performance, although there were some price-appropriate parts.
View detail
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
Yoshimura oil filter cap..
Item arrived... quality built Is good...colour red..nice...took a while to arrive due to no stocks, overall very satisfying..never been disappointing..thank you team webike..more to come. View detail
Focus on appearance
If you notice, it's full of zeta.
YOSHIMURA is used.
The product is satisfactory but expensive!
Recommended for those who don't mind the price.
View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
KITACO handle handle
Highly recommended. There are many improvements in the installation area when installing or disabling this product.
Reasonable price, easy to install and good workmanship. Highly recommended. I recommend it for its good quality and easy operation to install on my Monkey 125.
Good quality, good quality, no need to say anything. -------------------------------------------------- -------- Highly recommended. In the installation of this product, it is improved in the parts that can be installed. Reasonable prices, easy installation and good workmanship. Highly recommended. Recommended for quality and easy workability to install in my Monkey 125. Good quality, good quality and no need to say. Powered by Google Translator
View detail
aluminum key box cover
I bought it to decorate my new bike. Thank you for selling small yet meaningful items.
The quality is great and you can see that the material used is CNC machined aluminum with a blue anodized finish.
The color, design, and functionality are okay. I like it because it's easy to understand and install. -------------------------------------------------- -------- I bought it to decorate the new bike. Thank you for selling it. You can see that the quality is excellent and the used material is CNC processing to confirm that it is a blue anode oxidation finish. Color, design and function are fine. I like it because it is easy to understand and easy to install. Powered by Google Translator
View detail
The ride is great!
The ride and maneuverability are excellent! View detail
It will be Accent around the Engine.
There are many similar filler caps available from other manufacturers, but YOSHIMURA's logo is the one point of satisfaction.
I am not sure about the durability, but the cutting accuracy of the screw threads is good and I have no complaints. I think it is a good product.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT110 HUNTER CUBCT125, HONDA Rebel1100, HONDA Rebel250, HONDA Rebel500, HONDA CL250, HONDA CL500, HONDA GB350, HONDA GB350S, HONDA DAX125
The anti-glare effect is perfect.
Since it is simply attached to Normal mirror, anyone can install it as long as they do not fail in positioning.
The anti-glare effect is effective against the Light of following vehicles during the day when the sun is strong and at night.
The degree of wide angle is not very promising. There is no difference between NORMAL and LARGE in actual view.
View detail