Reviews
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
very good
Off car is exercised while riding, so I feel that Aluminum Tube is Smooth because it is not deformed by force or deterioration! View detail
Z -WHEEL Aluminum nipples kx250 Front
Cost performance is better than OEM.
Nipple head (Rim side) is huge, so
Large amount of pop out from Rim
When installing the Tire, the BEET was not falling enough.
Tire is a little hard to fit
View detail
Genuine Yamaha Front Wheel Oil Seal for WF450F 2017
This was the oil seal for the front wheel on the WRF450F which needed new wheel bearings. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in th standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
durability
I use it for its durability.
(10000-30000km)
View detail
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
Genuine Yamaha Gasket for XT250
Whilst I was changing out the oil and already purchased the new oil drain plug, I wanted to make sure I had a good seal so also purchased the genuine Yamaha gasket for this bike. This is only the second oil change I have done on this bike but it is only a 2019 model anyway. The correct gasket was found when I checked for the correct oil plug. Not too tricky when you have the Yamaha schematiics in front of you. The price was really good value, yes, you could get a pack of cheaper after market gaskets but for this money, why would you risk a good seal. Anyway, with a couple of other parts I needed including the oil plug, I had my order shipped using EMS. My order arrived in perfect order and 100% no damage in 5 days straight. The gasket was in the usual Yamaha clear packet. There were no contaminants inside the packet which was nice. The washer looks to be copper but I would assume it is a copper and some other metal mix. Easy job to do replacing the gasket and oil plug but make sure not to over tighten. Use a torque wrench and make sure you have it right. Very happy customer. Great work Webike. View detail
Genuine Yamaha Plug Straight Screw for XT250
One of the only parts I do insist on changing is the oil plug on bikes after and oil change. Mostly due to the screw becoming a little messed up and could be harder to remove over time. Even though this bike is a pretty young bike, it has a lot of years left in it and I would hate to have to drill out the bolt to change oil in the future. The correct part was found by using the tools Webike provide on their help section. I then did a cross reference with Yamaha schematics to make sure. The screw was not expensive but when you get a genuine Yamaha one, you know it will be perfect for the job. With a few other parts, my order was shipped using EMS and arrived in one piece and perfect condition in 5 days. The screw came in the standard Yamaha packet and wrapped in bubble wrap envelope. It was really clean on the threads and no shards or swarf were found. Along with the genuine Yamaha gasket all was fitted eas=ily and no leaks once torqued correctly. Very pleased witht his purchase. Cracking work Webike. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ450FX, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TC85, HUSQVARNA TE125, HUSQVARNA TE150, HUSQVARNA TE250, HUSQVARNA TE300, HUSQVARNA TX125, KTM 125EXC
Blue looks great in WR.
It is a simple nut, but the OEM is extremely simple, so the blue stands out and is a good parenthesis. The anodized surface of the tool contact area is inevitably peeled off because of the large torque applied to this part. I would like to know how to prevent damage to the surface of the nut since it is a part that is removed and attached quite often. View detail
Front sprocket replacement
Since the rear sprocket was replaced, the front sprocket was also replaced.
The OEM is 14T because we want acceleration, but this time we will replace the Front with 13T.
Lowering the front sprocket sacrifices fuel economy and top speed, but I want the acceleration that makes it easier to ride with WineDINK….
Nut is a 32mm Socket.
I haven't ridden it yet, but I am looking forward to seeing how it will change.
When I changed the front sprocket, I also purchased the OEM 14T so that I can change it back if the characteristics are too large to fit.
View detail
The construction looks good.
I think the construction is good. However, I feel that if the handlebar or throttle is deformed even slightly when bumped or tipped over, there is a possibility that it may not return to its original shape, so I think it is better to use Material:High Solo feel is only slightly different. View detail
Genuine Yamaha Ball Race 2 for YZ450F
I have done a lot of work on this bike for quite a few years and the ball race was needing to be changed. I already knew the part number from the previous fitting but still cross referenced from Webike help pages and Yamaha schematics to make doubly sure. The cost of teh race was really good and better than could be sourced locally. I always have a few other parts in an order at once as this does save me on the shipping fees. I used EMS as they just get the parts to me fast. Within 5 days from shipping my order was delivered. The race came in teh Yamaha packet and was also inside a bubble wrap envelope for safety. It came in great condition and the race is did not have any sigh of damage. This fitted perfectly and made a whole load of difference to how the bike stabilised. Very impressed with how well it all worked out. View detail
Fits: BMW G450X, GASGAS EC, GASGAS MC, GASGAS XC, HONDA CR125, HONDA CR250, HONDA CR500, KAWASAKI KX125, KAWASAKI KX250, SUZUKI RM125, SUZUKI RM250, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X
Effective! But...
I put it on my YZ125X, which has a‘21 footpeg. The OEM product number I checked was the same part number for both the footpeg and base installation, so I figured it would fit.
Result is Normal position is OK, Low Position is footpeg stopper (Adjustment by putting Washer in Screw) The head of the base mounting screw? The head of the Screw on which the Base is mounted?
The footpeg is designed to tip up when the footpeg falls over, just like the OEM model, but the part where the spring hangs on the footpeg side hits the mounting screw on the base and only raises the footpeg a little bit. So, I used a grinder to shave off the upper part of the spring hanging point to increase the amount of tilt, but it still only goes up a little as shown in the photo.
Well, it is Universal's Made in USA product, so some modification is acceptable.
The effect when you ride it, however, is that it bites firmly to the foot! But there are no negatives of too much bite, and the best part is that it is easy to apply load on climbs!
I thought it was a bit expensive, but it was the right decision!
View detail
Fits: SUZUKI DRZ400SM, SUZUKI RMZ450, SUZUKI DRZ400S, SUZUKI RM250, SUZUKI RMZ250, KAWASAKI KLX450R, SUZUKI RM125, KAWASAKI KX250, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KX125, YAMAHA TT250R, YAMAHA TT250R RAID, YAMAHA DT200WR, YAMAHA DT230LANZA, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA WR250X, YAMAHA SEROW225WE, YAMAHA WR450F
Zita Hand Guard Mount Side Type
PROArmor Handguard and Quantity:I installed it on a handlebar with a set, and because it is fixed using the bolt of the triple clamp, the position of the hand guard could not be fixed in the desired place. It is not a problem because of the functionality. The price is very reasonable, so it would be great if the price could be reduced a little more. View detail
Genuine Yamaha Clamp for YZF-R1 2007
I don't usually buy these OEM as parts as they are just tie wraps essentially but the customer wanted all standard so this is what they wanted. Finding the correct clamp was not hard as I search Webike help section and use Yamaha schematics to cross reference. A few other part in my order for this bike and shipped via EMS. I get me orders using EMS in 5 days which I assume is a standard of theirs as that is the timeframe I always work with. Very well packaged products and no damage in transit. The also came in the regular Yamaha packet. The clamp is a good part but again, nothing too special. Works exactly as it should so there are no complaints. Cheap part, oem standard, very pleased. Thanks Webike. View detail
Genuine R&G Toe Guard for Honda CBR600RR 2010
R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again. View detail