Reviews
Fits: SUZUKI ACROSS, SUZUKI GF250 S, SUZUKI GF250, SUZUKI GS400E, SUZUKI GSX-F, SUZUKI GSX-R250, SUZUKI GSX-R400 R, SUZUKI GSX-R400 SP, SUZUKI GSX-R400, SUZUKI GSX1100S Katana, SUZUKI GSX1100S Katana, SUZUKI GSX1100S Katana, SUZUKI GSX250E, SUZUKI GSX400F-2, SUZUKI GSX400F, SUZUKI GSX400FW, SUZUKI GSX400FWR, SUZUKI GSX400X Impulse, SUZUKI GSX750E, SUZUKI GSX750S Katana
First time exchange
I replaced it for the first time. I have been able to use it without any problems. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: SUZUKI B-KING, SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSF1200S, SUZUKI GSR400, SUZUKI GSX-R1000, SUZUKI GSX-R1100, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1400, SUZUKI GSX400S Katana, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI BURGMAN200, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI BANDIT250, SUZUKI BANDIT1250F, SUZUKI BANDIT1250S
look cool
I replaced 2 red Daytona oil cap on Suzuki V-strom 1000 ABS and Hayabusa 1300R. it come with o-ring and easy replace OEM plastic cap, cheap price, red anodize look cool. View detail
Fits: SUZUKI B-KING, SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI GSX400S KATANA, SUZUKI SV1000, SUZUKI SV1000S, YAMAHA XG250 TRICKER, YAMAHA XT250X, YAMAHA XT250 SEROW250, SUZUKI GSX1400, SUZUKI GSX1300R HAYABUSA, SUZUKI BANDIT125S, SUZUKI BANDIT125F, SUZUKI BANDIT125, SUZUKI INAZUMA 1200, SUZUKI GSF1200S, SUZUKI GSX-R1100W, SUZUKI GSX-R1100, SUZUKI DL1000 V-STROM XT, SUZUKI DL1000 V-STROM
NORMAL's Material:Plastic is insecure
NORMAL's Material:I was worried about Plastic, so I decided to go with Gold, and since it's a Touring Main, I won't be doing a Lock pin. View detail
Fits: SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-STORM250, SUZUKI ACROSS, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400V, SUZUKI BANDIT400V, SUZUKI BANDIT400VZ, SUZUKI BANDIT600, SUZUKI BANDIT600S, SUZUKI BANDIT650, SUZUKI DESPERADO400 WINDER, SUZUKI DESPERADO400 X, SUZUKI DESPERADO400, SUZUKI DESPERADO800, SUZUKI DESPERADO800X, SUZUKI GLADIUS400, SUZUKI GLADIUS650
It's insanely light.
Chain of did (The higher ones)
First of all, it is so light that you would think it was plastic when you hold it.
And when pressed, the Rear is clearly lighter.
Also, it is now easier to SHIFT UP.
I am satisfied, but I am afraid I gave it 4 stars because I did not feel the effect as I expected, perhaps I was expecting too much, and I personally would have preferred a more subdued color.
View detail
Fits: SUZUKI volti, KAWASAKI ZXR250R, KAWASAKI Z400FX, KAWASAKI ZXR-II, KAWASAKI GPz400S, KAWASAKI GPz400R, KAWASAKI EX-4, KAWASAKI GPz250, KAWASAKI 250TR, HONDA Rebel , HONDA Hornet 600, HONDA Bross 2, HONDA Bross 1, HONDA Zervis., HONDA Jade Nighthawk., HONDA videotape recorder, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250R, HONDA GB250 Clubman
Cheap and good stuff!
I chose this product to purchase a Motorcycle Cover for my GB250 CLUBMAN. When I put the cover on, I tend to lose track of the front and rear, but this product has a blue handlebar part, so I can see the front and rear at a glance. Although it is inexpensive, it has a center buckle and a keyhole, so I think it will work well even outdoors. View detail
Fits: bimota YB-7FORGORE, PIAGGIO X9Amalfi, PIAGGIO X9 200Amalfi, SUZUKI V-STROM650/ABS (reimport), HUSQVARNA TE450, HONDA SONIC125RS(Reimport), HUSQVARNA SM510R, HUSQVARNA SM400R, GILERA RUNNER VXR200 4T, CAGIVA RAPTOR650・V RAPTOR650, KYMCO RACING150, KYMCO RACING125, ADIVA R125, MOTOGUZZI NORGE 1200GT, GILERA NEXUS500 SS, ADIVA N125, KYMCO MOVIE AFI 125, MALAGUTI MADISON150, MALAGUTI MADISON125, MALAGUTI MADISON S200
periodic replacement
I purchased this plug because it is a dedicated Plug designated by Manufacturer. View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
cannot be experienced
Unlike Oil, I could not feel it when I replaced it from OEM. View detail
Fits: SUZUKI ACROSS, SUZUKI GF250 S, SUZUKI GF250, SUZUKI GS400E, SUZUKI GSX-F, SUZUKI GSX-R250, SUZUKI GSX-R400 R, SUZUKI GSX-R400 SP, SUZUKI GSX-R400, SUZUKI GSX1100S Katana, SUZUKI GSX1100S Katana, SUZUKI GSX1100S Katana, SUZUKI GSX250E, SUZUKI GSX400F-2, SUZUKI GSX400F, SUZUKI GSX400FW, SUZUKI GSX400FWR, SUZUKI GSX400X Impulse, SUZUKI GSX750E, SUZUKI GSX750S Katana
Satisfied
Packing is also Quantity:It's a Set, so it's helpful.
However, unlike KIJIMA's separately sold Packing, mine is slightly deformed, so I had to be careful not to mesh it strangely when I installed it.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Used in GB350S
It is relatively inexpensive for a Manufacturer product and functions well enough for its needs.
The size of the cover is also exact, but the area where the exhaust pipe hits the cover is large and the cover itself is not heat resistant, so if you use it, be careful about this.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Lever position can be finely adjusted.
I didn't like the lever position of the NORMAL, so I replaced it with this lever, which allows fine position adjustment.
I am satisfied with the high quality and the easy grip.
View detail
Fits: SUZUKI Bandit 650 (GSF650), SUZUKI Goose 250, SUZUKI Goose 350, KAWASAKI GPZ900R, SUZUKI Bandit 650 (GSF650), SUZUKI GSR600, SUZUKI GSX650F, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1100E, SUZUKI Bandit 1250F, SUZUKI GSX400S Katana, SUZUKI GSX-R250R, SUZUKI GSX-R400, KAWASAKI KR-1/S/R, SUZUKI RG125A, SUZUKI RG200A, SUZUKI RGV250γ/SP/SPII, SUZUKI SV1000/S, SUZUKI SXR400
A little expensive, but
I didn't see it in the car model configuration.
The SV650X 2022 is available for Tokico.
The operation feel is good.
There is no unintentional gripping as it works as you grip.
It works fine in the rain.
I have no problem with Circuit driving sessions, but I don't know about Race because I've never done it.
The downside is that it's expensive?
Just One Side of this one, because with the other one, you can buy both. w
But you can use it once.
View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
Select L for G310R
[How is it used?
This is the Apartment's outdoor motorcycle storage area.
Was the one you received as per Image?
Yes
Was the installation difficult?
First time on a Motorcycle and first time on Cover, so the first time was a bit of a struggle, but no problem.
How was your experience with it?
I couldn't get the Seat to stick on the Exhaust System part right.
I put my hand on the Motorcycle with the cover on and stuck my hand in the right place....
No sidestepping.
[Included Parts:were they on?
Seat was attached to the Exhaust System part.
[Was there anything that disappointed you?
I knew that, but the Light of the key is Red, which is not good.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX1300GSX1300R HAYABUSA, SUZUKI GSX400 Impulse, SUZUKI BANDIT250V, SUZUKI BANDIT400V, SUZUKI SKYWAVE250 burgman, SUZUKI SkyWave (burgman)400
MOSFETRegulator 35A SUZUKI
I have a 2006 GSX1300R HAYABUSA. the OEM regulator became unstable, so I bought a cheap Chinese one. it blew smoke and punctured without running 1000Km. it was a waste of money to buy a cheap one.
As expected MOS FET." It is stable at 13.9V~14.1V. Installation was done without any modification.
View detail
Fits: YAMAHA FZX250 ZEAL, YAMAHA XJR400DIVERSION, YAMAHA XT250X, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA TW225, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA SR500, YAMAHA SRV250, YAMAHA RZ-1, YAMAHA SR400, YAMAHA Renaissa, SUZUKI BANDIT400V, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI BANDIT400
Completely Waterproof is still good!
Repeater
I knew this product was waterproof, so I bought it from Webby's before the rainy season started.
As for waterproofness, there is no problem, but it is unavoidably thick and heavy, making it difficult to handle.
Well, I only use it when it rains, so it is not much of a problem.
Compatible models are indicated, but when used on an XSR700, the front tires are not all covered.
I think I could have gone up One size.
The regular price may seem a little expensive, but the actual price is not so high, so I think it is cosmetically pleasing.
View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
Always replace the usual
After about two years, the same areas will start to tear due to age and deterioration. This area is usually subjected to force and is prone to wear due to wind and other factors. I hope the fabric is reinforced. View detail
Fits: KAWASAKI ZZ-R1200, KAWASAKI ZZR1100, KAWASAKI ZXR750R, KAWASAKI ZXR750, KAWASAKI ZXR400 R, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI VERSYS1000, KAWASAKI ZRX1200 DAEG, KAWASAKI KR-1S, KAWASAKI GPZ900R, KAWASAKI KR-1R, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR400, KAWASAKI ZZR600, SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400 Limited, SUZUKI Bandid 400V
It is safe.
FrontQuantity for KATANA vehicle inspection:1 Set of 4pcs. replaced.
Nothing is impossible!
It is safe.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
For Stem Mount installation
[How is it used?
TZr250R (3XV) I was looking for a Pierced Type Stem Nut to attach a Smartphone Mountetc. to.
I measured the outside diameter of the car, and from other people's blogs, I thought I could use this product, so I bought it.
Was the one you received as per Image?
I bought the TitaniumBlue color because I thought it would be neither too ordinary nor too flashy.
The color was exactly as shown in the picture and exactly as I expected.
Was the installation difficult?
The size was correct for this product.
It is easy to loosen and replace the OEM Stem Nut.
I remember that the OEM used a 27mm Socket and this product used a 30mm Socket.
To prevent damage to the Nut, I applied masking tape to the Nut before working on it.
How was your experience with it?
There is no particular change in functionality, but there is a considerable change in appearance. (Well, if you put on the Stem Mount, you can't see much.)
OEM was not able to use StemHolder because it was in Cap, so I am happy to be able to use it.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I am not disappointed, but I felt that titaniumium blue is not suitable for older motorcycles.
Silver may have been a safe bet,...
【Review】
These items are useful for attaching a StemHolder to a vehicle with a Cap type Stem Nut.
Replacement is easy, and as long as you have a socket that fits the size, you can install it right away.
Anodized texture is also perfect.
View detail
Fits: SUZUKI Intruder LC250 (Intruder), YAMAHA TZR250, KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN 800 (VULCAN400), KAWASAKI VULCAN 1500 CLASSIC (VULCAN900 CLASSIC), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI VULCAN, KAWASAKI ESTRELLA (ESTRELLA), KAWASAKI ESTRELLA, KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI ELIMINATOR 250V (Eliminator), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS-II (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI BALIUS (BALIUS), KAWASAKI ZEPHYR 750 (ZEPHYR)
It is cosy with OEM same etc.
Brake lever of SUZUKI's GRASS TRACKER was replaced because it was broken.
Cosmetics are good, no discomfort, no problems!
View detail
Fits: SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI Gixxer SF 250, SUZUKI GSX750 KATANA, SUZUKI GSX400, SUZUKI BANDIT400, SUZUKI BANDIT400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI GSX-R1100, SUZUKI GSR400, SUZUKI GSF1200, SUZUKI GS1200SS, SUZUKI B-KING, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI SKYWAVE650 burgmanLX
Dress-up parts with a high degree of self-satisfaction.
[How is it used?
The GSX-S1000F's humble filler cap was replaced with a PREMIUM ZONESeries for dress-up purposes.
Until then, there had been single-color anodized filler caps with a simple shape sold by several companies, but I had never seen a filler cap with such an elaborate molding and two-color configuration, so I installed it on my GSX-S1000F that I had just purchased at the time with great enthusiasm. I installed it on my GSX-S1000F that I had just purchased at the time.
Was the one you received as per Image?
I had used PREMIUM ZONE Master cylinder tank cap for another car, so I had no doubt about the quality of the product.
Was the installation difficult?
Gently remove the OEM filler cap and gently tighten this product to complete the installation!
The difficulty level is as low as possible.
How was your experience with it?
Good looking."
Naturally, nothing has changed in terms of functionality, to put it bluntly. Oil inlet lid. It is
There is also no hole for blizzard Hose extraction, which was a bit popular in some parts of the 1980s and 1990s.
The only merit of the replacement is the owner's satisfaction, and that alone is enough to make this product worthwhile.
[Included Parts:were they on?
None, only this product is included in the relatively luxurious Package.
[Was there anything that disappointed you?
I bought it for its appearance, not for its functionality, and since I like the way it looks, I am not disappointed at all.
Other items that would be helpful
Point and hang of installation
Since it is not a product with Habit in particular for installation, it can be tightened by force and so on. Screw Lick. It is sufficient to handle it gently so as not to
[Availability and clarity of the Instruction Manual
The product is so easy to install that anyone who purchases this product for this product will have no problems.
Since they are dress-up parts, there are few products that are easier to understand than this one.
I think
[Notes]
'Vehicles with an Oil level gauge on the OEMFiller cap will lose the Oil level gauge.' Therefore, if the oil is installed in the applicable vehicle, pay attention to the capacity when replacing the oil.
[ITEMS TO BUY TOGETHER
DAYTONA's PREMIUM ZONESeries of Handlebar End Ya "Master cylinder cap" It may be a good idea to match the whole with etc.
[Opinions and requests to Manufacturer
Please keep up the high quality product lineup.
View detail