Reviews
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
This is what it looks like when installed on a KTM 2013 DUKE.
This is what a BMConti2-type Handlebar looks like when attached to an Initial ModelDUKE. Finger is about the same height as Limit. View detail
For TW Oil replacement.
I was looking for this product to also replace the Filter when replacing the Oil in my TW200.
Purchased
I thought about cheaper ones but decided OEM was the way to go.
I am satisfied with it
View detail
NTB would be almost OEM.
I bought this to replace the AirCleanerElement on my TW200.
I think NTB can already be called an OEM Product.
View detail
I don't know.
Used to replace an Air element that I don't know when I put it on.
It is also soaked in oil.
Above all, the price is cheap!
Performance seems fine to me.
And if it gets dirty, it can be cleaned.
View detail
TW200 (2JL) Used for
I went to change the oil and found that the old element had quite a bit of dust on it.
This product comes with all the gaskets, etc., and is reasonably priced.
So I think it's very good.
If the gaskets are still usable, they can be kept in stock.
View detail
Oil Filler Cap
Changed to Green Light or Gold. View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW125, YAMAHA TW200
feel well
Used for Restore on TW200
It is a little more expensive than other manufacturers, but I trust them.
The one that came with it so far was terrible.
In case of TW200, it is necessary to remove the Left cover to replace the FrontSprocket.
I'll have to buy Packing at the same time.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW125, YAMAHA AG200
A little tainted.
Used for Restore of TW200
I bought it to go along with the Front that I also replaced.
Maybe it didn't have to be Duralumin.
Well, I bought it.
The items are clean and trustworthy.
View detail
Used for ST250
Used for ST250.
We were happy to be able to use the Wires as they were.
View detail
Nice upgrade from stock wires
Since I upgraded my ignition system during an engine rebuild, I decided to get brand new spark plug wires as well. NGK appears to be the best choice, and the price from this retailer was lower than my local bike parts store. Honestly can't tell or feel a difference between these and the OEM ones,It seems like cold starting is easy. but hey, they're red and they look cool... plus they are backed by NGK, so you know the quality is solid. View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
It's not very plain, but I always replace it.
Purchased this one because it is slightly cheaper than OEM. I don't think there is much of a problem. I know many people reuse them because they tighten so tightly, but considering the significance of Gasket being used there, I think they need to be airtight. So I'm not being stingy and replacing it. I want to change the OEM with an external Exhaust System, which for some reason comes” regularly! I change them when I'm in the mood to”change them. View detail
I installed it on a 250tr.
I installed this on my 250tr. I was bored with the OEM so I took a shot at it as an amateur. I was nervous about drilling the holes, but it turned out well. I am looking forward to touring. I am looking forward to touring. View detail
Grip is consumable.
This time, I bought the Grip I use for SR because it was getting old. I thought about the Grip again (laugh).
What is ☆Grip in the first place?
It is located at both ends of the Handlebar and is directly connected to the Throttle.
☆ What is your role?
Motorcycles transmit road conditions and body vibrations from the Handlebar, but vibrations and shocks can easily cause fatigue. Therefore, Grip works to absorb such shocks and vibrations.
☆ From what perspective should Grip be chosen?
Various materials are used for grips, such as gold, hard rubber, and soft sponge rubber. What is the best material among them?
→ As a matter of fact, which one will fit you will vary widely depending on your individual preferences and the Situation you use.
☆Situation and example
Harley-Davidson's custom machine→Sponge rubber has excellent shock absorption properties and is used for example in the case (SR and single cylinder are also used here).
◎for Race→ thin and easy to grasp the road surface and tire conditions. Therefore, it tends to be favored by people who enjoy riding. A typical example is the Grip, which was used in Yamaha's production Racer TZ250 on an OEM basis.
◎Touring use→ The thicker the better, the easier it is to reduce fatigue in accelerator operation.
The thicker the Demerit→, the more difficult it is to transmit information from the road surface and tires, and the smaller the hand, the more difficult it is for a small person or woman to operate the lever. The thicker the accelerator operation is, the more it can respond to a large amount of movement, so it cannot be said that the thicker the grip is, the better. 。
This is all a story of difference, so I think it is at least a matter of not interfering with the Lever operation and preference.
This one, which can be called the barrel type Type, was replaced this time.
Why did you choose this one?
→Touring Main to reduce vibration, Style was the deciding factor (lol) and price.
good point
● It is thicker, so it absorbs vibration. Because the vibration of SR without →Balancer is great (laughs).
● Soft and easy to grip. →Durability will be low.
Analog atmosphere suits the car body.
A bad point
The thickness of the Accelerator makes it difficult to perform precise Accelerator operations.
● Because it is held forcefully, it is soft and easily progressively wears out. 2 years may not be enough (laughs).
How to exchange ■ ■
(1) Remove the existing Grip.
Existing grips are generally removed using a slotted screwdriver and parts cleaner.
(2) Clean the Handlebar.
Old glue remains on the handlebar after removing the existing grips 。 Use parts cleaner or a spatula to remove the adhesive and clean the Handlebar.
Before installing the new grips, apply Grip Bond to the handlebar. 。 If too much is applied, the bond will stick out when the grips are inserted, and it is a hassle to clean it up, so apply a thin coat. 。 It is necessary to allow the Grip Bond to cure overnight.
Point to note:When removing the grip, do not damage the throttle cone with a slotted screwdriver + remove the old adhesive firmly (the adhesion of the new grip will deteriorate).
Grips are considered to be consumable parts and not permanently usable parts, so if you continue to drive for a long time, you will probably have to replace them at some point (laugh).
View detail
NTB if there is NTB
If high performance and quality are not required, NTB tends to be cheaper than OEM for consumable parts.
Thank you for your continued support!
View detail
Fits: YAMAHA Majesty 250SV, YAMAHA Majesty., YAMAHA Majesty C, YAMAHA Bronco., YAMAHA Serow 225WE, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XT250X, YAMAHA TW225, YAMAHA TW200, YAMAHA TRICKER, YAMAHA TRICKER S, YAMAHA SEROW, YAMAHA SEROW250S, YAMAHA RZ50
Used in Caliper for RZ50
We chose the cheapest one because it is used for city driving and touring.
The durability is not bad, and I would buy it again.
View detail
Good
Oil replacement every two times and Element is also replaced.
Packing, etc. are also included in the Quantity:It is convenient and helpful to have a Set.
View detail
PetitCustom
[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system.
View detail