Reviews
Formative Lantern CUB
Changed from high quality plug to Standard Plug BP5HA I can't see much change in the expensive product and it seems to be covered with black. View detail
I'm satisfied
I had been interested in MOTO DX for some time, but had not been able to try it on my ZRX1100 because it was not available. I have just purchased a new Z125PRO, and although there was nothing wrong with the original Plug, I decided to give MOTO DX a try right away.
The replacement work is not particularly difficult, since all you have to do is to replace the plug. In fact, the Z125PRO can be accessed immediately, and since there is only one plug, it was one of the easier ones. However, it is not difficult, but if you twist off the plug by over-tightening, you will be in trouble, so be careful if you do it by yourself. I did it before with a ZRX1100, and it was a chilling experience. Fortunately, I was able to remove part of the twisted off plug using the Extractor, but I almost had to reverse the upper part of the engine. When tightening the plug, it is necessary to check the tightening torque carefully and close it with a torque wrench, or if you tighten it by hand, you need to tighten it more or less.
I quickly replaced the plug, put the plug cap back on, and did a test run. First of all, I felt that the car started up clearly better, and when I started driving, I felt that the acceleration was a little stronger. I do not yet know the effect on fuel consumption or durability, but I hope that the durability will be as good as the manufacturer claims. In general, I believe that the replacement has had a positive effect.
MOTO DX is more expensive than most plugs, but I found it to be a reasonably effective product. However, for a single-cylinder vehicle like the Z125PRO that only needs one, the price was right for a trial run because the hurdle is lower.
It is a good product that I would recommend without omission to my friends who drive vehicles with the settings.
View detail
Excellent braking performance.
I used to use Shoe of other brands, but this time I used NTB for the first time. I don't feel much change in the effect, but the brake noise during operation has been eliminated. It feels good. View detail
Fits: HONDA DIOSR, HONDA DIO, HONDA TACT BASIC, HONDA ZOOMER, HONDA SMART・DIO Z4, HONDA SMART・DIO, HONDA STAND-UP TACT, HONDA SUPER DIOZX, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA GORILLA, HONDA CREA SCOOPY, HONDA QR50, HONDA BAJA, HONDA TODAY, HONDA TODAY DELUXE, HONDA CUB PRESS, HONDA MONKEY
No Impossible part
There is no part that is not possible as a Body Cover. View detail
It's always this
I always keep it as a spare. It's inexpensive, the quality is good, and it's a standard item. View detail
Some older Suzuki scooters that are included in the list of compatible models may not be able to be used.
I have a SEA BASS ScooterLOVE and ordered this as a replacement part because the rear brake shoe is worn out.
However, when I lined up the delivered item with the removed shoe, it was clearly unusable because it was almost 1.5 times larger than the original.
This is not an evaluation of the performance of the Brake Shoe itself, but it is a review for all users of this type of older Scooter.
View detail
Fits: SUZUKI ADDRESS V50, YAMAHA Remote controller jog, YAMAHA TOWN MATE80, YAMAHA MATE NEWS 50, YAMAHA JOG TRUNKSpec., YAMAHA SUPER JOGZ, YAMAHA MATE, YAMAHA JOG SPORTS90, YAMAHA JOGSporty, YAMAHA JOG Z, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA AxisTrunkSpec., YAMAHA JOG, YAMAHA Vino, YAMAHA YB50, YAMAHA Axis, YAMAHA PW50, YAMAHA V80MATE50, YAMAHA V80MATE80
Very good for occasional motorcycle rides!
Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.
The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.
Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while.
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Replaced from heavily worn Plug
I had a symptom of poor cold start and ordered it with the intention of replacing it, no questions asked!
The work was completed without difficulty since it was a replacement for the same one in the OEM adopted Plug.
I removed it and compared it to a car with about 50,000 km on it, and I'm guessing that it has never been replaced.
The photo was taken without a second thought because of the amount of wear and tear.
After replacement, starting performance was clearly improved!
I reaffirmed the meaning of periodic replacement.
View detail
Fits: HONDA Spacey 125, HONDA Super Cub 70, HONDA Super Cub 90, HONDA DIO Series, HONDA Super Cub 50, GILERA RUNNER VXR125, GILERA RUNNER VXR200RST, GILERA RUNNER ST125, GILERA RUNNER ST200, HONDA Lead 90, SUZUKI Let's II, SUZUKI Let's 4 Palette, SUZUKI Let's IIG, SUZUKI Let's 4, SUZUKI Let's 4 Basket, SUZUKI Birdie 50, SUZUKI Birdie80, SUZUKI Birdie90, SUZUKI Address V50, SUZUKI Address V50 G
Used for LETS II with CarrierCase. Second purchase.
[Durability]
Used in a covered carport for about 2 years.
The side-view mirror area that is exposed to direct sunlight was torn; the area where the tire is exposed has rubber, but this area was not torn by pulling.
Considering the price, I have the impression that the durability is not that great.
[Fit feeling]
The length seems a little short, but since there is no ventilation, I think it is a reasonable size considering the breathability.
Ease of installation
The side with the wheel lock hole is on the front wheel side, so it is easy to see the front and rear when applying the cover.
Buckle type is easier to use.
View detail
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Fits: SUZUKI LETS5-G, SUZUKI LETS5, SUZUKI LETS4-G, SUZUKI LETS4, SUZUKI LETS4-Palette, SUZUKI LETS4-Basket, SUZUKI LETS-Basket, SUZUKI LETS-G, SUZUKI LETS, SUZUKI ADDRESS V50-G, SUZUKI ADDRESS V50
small object
It arrived quickly. It is not sold in stores, so it is very helpful. View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
great kolodki
its great very cool pfp pads, I haven’t installed them yet, I will definitely install them in the future, they look very confidence-inspiring and I think they will last for a long time View detail
The one I'm sure of
It is stable and high quality. I have had no problems with it and have been using this plug since the Normal engine. Currently at 80CC.
I don't race, so I don't keep running at high rpm, but I have no complaints about starting, fuel consumption, and response in daily use. The price is a few hundred yen, so I change the plug every 10,000 km or so.
View detail
Fits: SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI ZZ (ZZ), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI Verde (VERDE), SUZUKI STREET MAGICII (STREET MAGIC II), SUZUKI STREET MAGIC (STREET MAGIC), SUZUKI STREET MAGIC, SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIS (LETS Two S), SUZUKI LetsIIL COMBINATION BRAKE (LETS Two Elle Combination Brakes), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIL (LETS Two L), SUZUKI LetsIIG (LETS Two Gee), SUZUKI LetsIIG (LETS Two G)
Good OEM brake pads
Fits: SUZUKI LETS5G, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETSBasket, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50, HONDA PCX150, HONDA PCX, HONDA LEAD110EX, HONDA LEAD110
Replaced with Pine Stripe LED Headlight for mopeds
The NORMAL Halogen was too dark and I was afraid to drive at night, so I replaced it with Mats Stripe's LED Headlight this time.
Installation was very easy and took about 15 minutes.
I ride a white motorcycle, so I am satisfied with the white light and the body color.
I am glad I replaced them because they are more visible on the road at night.
View detail