I can last three years

In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price. View detail

Replace instead of overhaul 20 year old OEM

The MAJESTY 250 OEM Master Cylinder is 20 years old, the paint is peeling, the fluid level window is white and cloudy, and the touch screen is dead. I thought that if I replaced it with OEM, it would be in the same condition again someday, so I replaced it with this one, which has better accuracy and quality.

The original vehicle had some customization done to the exterior, and the replaced handlebars gave it a more custom look.
I am satisfied that the color of the handlebar matches the color of the MASTER and Lever, creating a sense of unity.

Unlike the OEM, the 6-step lever play adjustment is also highly satisfactory.

Also, we are happy to be able to strengthen the brake with the SKULL Helmet principle by lowering the diameter by 1 Size to 11mm, compared to the OEM MASTERPiston diameter of 1/2-inches.

The brake hoses were stainless steel mesh when they were installed, so we did not have to worry about a large increase in stroke volume, and both control and braking power were improved, resulting in a highly satisfactory brake customization. View detail

New Master Cylinder while replacing Lever.

[How is it used?
The Yamaha MT-25's Brake lever had been made in China since delivery and I was concerned about rattling.
I was worried about using such a product in Brake, but I was wondering what to do because OEM products are too expensive and other brand products from proper manufacturers are expensive. I was wondering what to do. I realized that if I just refurbished the Master Cylinder, it would solve everything, and I came across this product, which is a NISSIN product with a separate tank.

Was the one you received as per Image?
I have used a different Master Cylinder diameter on a different car model, so it was as per Image.

Was the installation difficult?
In the case of MT-25, of course, there is no need to consider interference with Cowl, so it is almost a simple installation.
The banjo bolt was left in place, and the brake switch was simply replaced since the terminals are exactly the same.
In my case, I had a hard time getting the air out because I had changed to Separate Handlebars.

How was your experience with it?
The OEM and Piston diameter is the same 11mm and the same sideways push, so we did not feel much change in the touch and effectiveness of the Brake.
However, with Lever's new, crisp and accurate, I feel that my peace of mind has increased many times over.
Also, NISSIN Lever's R condition etc. is so exquisite that my fingers do not get sore at all even if I ride for a long time.
It looks better and Repair Parts are readily available, so there is nothing to say about it.

[Included Parts:were they on?
Basic AlmostQuantity:It is a Set, but the Mirror Holder Bolt for M10Pitch 1.25 does not come with it.
Perhaps the M6 Tank fixed Bolt is a mistake.
It just so happened that the original Mirror Holder cap had the same cap, so I was able to use it and get away with it.

[Was there anything that disappointed you?
Not particularly

【Review】
Quantity:Pair (for Left and Right) It is great to be able to refresh the Master Cylinder for about the price of a Lever set.
Anyway, it is very reliable and has the best Touch of Lever and even Adjuster.
I have graduated from the mysterious Chinese Lever and can now ride without hesitation. View detail

Excellent braking performance.

I used to use Shoe of other brands, but this time I used NTB for the first time. I don't feel much change in the effect, but the brake noise during operation has been eliminated. It feels good. View detail

ZZ

[How is it used?
Town ride
How was your experience with it?
It has become quite Smooth!
How did it compare to other products?
I think it's cheap and good. View detail

extraordinary

[How is it used?
Town ride
How was your experience with it?
cheap
How did it compare to other products?
cheap View detail

perfectly

Quality that can be called OEM Product View detail

Number 100, number 100 ♪

I am purchasing this for my CUB.
When we did the bore up, we also installed Big cabPC20. Originally, the jets were already installed. I could have used it as it was, but I wanted to replace the jets while I was touching it.

This time, we decided not to replace the Throw and Needle, but only the MJ. The Jet system of the carburetor must be made properly, otherwise it will not give good results even if you touch it. It is difficult to confirm if it is made properly just by looking at it. I think trust is the best.

I have no problem with the installation. I checked with different numbers, and I enjoyed working with OEM because there is no doubt about the accuracy of the parts. It is a very important thing to have no doubt about the accuracy of the parts, and it reduces the amount of work. As a result, we decided to use No. 100.

I can't see the number on the Jet well with my old eyes, and I can write the number on the Large Jet with a thin Magic when I store it, but I can't write it on the Small Jet. There is no limit to the working time, so I look at it with my eyes. Magnifying glasses and reading glasses are good, but I imitate people of my age who are looking at small letters on their smartphone screens. When I store them, I put the package paper inside the Accessory Case to make it easier to read.

It's been around for a long time, but carburetor is fun once you start touching it. It takes a lot of time and effort, but the best thing is that it is fun. View detail

front pads

Everything was installed well, the quality is good, so far no extraneous sounds, no squeaks, no whistles, no dust, brakes decently, satisfied. I came up, it turns out there are two types of front pads for 100 address, check before purchasing to find out the model year View detail

the best

I came up, it turns out there are two types of front pads for 100 address, check before purchasing to find out the model year View detail

No Impossible part

There is no part that is not possible as a Body Cover. View detail

Grip replacement for LETS4

The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use. View detail

Some older Suzuki scooters that are included in the list of compatible models may not be able to be used.

I have a SEA BASS ScooterLOVE and ordered this as a replacement part because the rear brake shoe is worn out.
However, when I lined up the delivered item with the removed shoe, it was clearly unusable because it was almost 1.5 times larger than the original.
This is not an evaluation of the performance of the Brake Shoe itself, but it is a review for all users of this type of older Scooter. View detail

Very good for occasional motorcycle rides!

Purchased for an old CUB that I might ride once a month or so.
S Size was the perfect size.

The fabric is thick and flap resistant, and the waterproof property is very solid.
The inside is also soft material and gently wraps the body of the car. Considering the quality, the price is very reasonable.

Because of its weight, it cannot be applied quickly and easily, so it may be a hassle to put it on and take it off every day when you commute on your motorcycle.
This product was very Exactly for my needs for a vehicle that is only ridden occasionally. I am planning to buy one for my other motorcycle that I ride only once in a while. View detail

Cool grips

I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.

I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator View detail

No problems so far.

I just wanted to White the Light, so this cheap Valve is sufficient. View detail

good-tempered

Better than OEM Product
It runs out fast, but I recommend it because of its low price. View detail

It works well for 15,000 km even with heavy use of Brake!

DAYTONA Hyper Sintered Pads have good initial braking and the first shot is effective even in the freezing cold of midwinter. (excluding Race) 。

I use Hyper Sintered Pads which work well right away in the middle of winter and switch to Golden Pads in the heat of summer.

When I say that HYPERSintered works well at the back, I mean that it does not slip out when you grip it as hard as you can, but it works very firmly! HYPERSintered is a little less effective at the back. On the other hand, the Golden Pad has absolute braking power and works well all the way to the back, but only if it is warmed up.

So for STREET in cold weather, Hyper Sintered Pads were my answer with emphasis on initial braking.

Also, in terms of driving style, I don't do full brake at all. If you use full brake a lot, Golden Pad is better.

HYPERSintered is a threat abrasion resistance, even when Brake well used. (Almost no full Brake) I really recommend it because it lasts for 15,000 km. The Pad thickness is thick from the beginning at 5.5mm and 5mm, which is also a factor in its good holding power.


Brake Pads replacement is life-threatening, so be careful. View detail

Very happy

Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail

Product # 450-3021000

It was purchased for the Honda Super Cub to adjust the fuel mixture after installing the whale 75, size 85. Everything is great, I recommend it to everyone to purchase. Purchased for a Honda Super Cub to adjust the fuel mixture after installing kit 75, size 85. Everything is great, I recommend it to everyone for purchase. View detail