Maintenance.

I have not used it yet but the Bolt on the R1 has rusted so I bought it to replace it.
I would recommend everyone to replace it before this happens because it will make the Brake less effective. LOL! View detail

Exactly to MONKEYGROM

It is Exactly for 125cc Minimoto. It is thick, waterproof, and will not fade. It is quick to hang, and the center clip prevents flapping, even in strong winds.
The holes for locks on the front and back are also well and not frayed.
The black color is inconspicuous at night and plays a role in security. View detail

I can last three years

In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price. View detail

Satisfaction with constant change in running Custom

I was surprised that LEDValve is now available at the same price as Halogen.
The replacement process for the subject vehicle is very easy and custom!
I am very satisfied with the look and the White light, very beautiful. View detail

Control voltage is too high.

After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!

Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all... View detail

Good quality front fork dust seals!

These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail

Punching in as is

As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.

I don't know about durability so far. View detail

As expected of Nisshin, the braking power is also GOOD!

LEAD110 (JF19) I tried it out for the first time. I feel that the braking force and touch are better than those of the Normal pad, and the price is cheap and cost effective. I don't know about durability in the rain yet, but Caliper is also Nisshin, so I think it might be a good match.
I think the performance is sufficient for a Small Type Scooter. View detail

Grip replacement for LETS4

The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use. View detail

No problem, but...

Coupler is a little bit small and a little bit tight.
At first I thought I had the wrong part number because it didn't fit. View detail

Quantity with high grip tire because it works well.:Set Exchange is a Recommendation

It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.

The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)

I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good. View detail

It's cosy.

I think the quality is the same as OEM etc. I don't know about durability yet. View detail

Cool grips

I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.

I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator View detail

The ball joint could be a little stiffer from the start….

The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …) View detail

In the 90ccClass CUB

Select OEM designation for CUB + 1st Up.
88ccetc.Bore up and you'll be first up for now.
Quantity since it is covered during Setting anyway.:I may buy 2pcs or so.
You there! After you get some Carburetor setting, you should put in Windshield IRIDIUM or some other expensive Plug! View detail

Hey!

Contact Person!
I thought I sent you an email telling you to Cancel! View detail

Very happy

Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail

Is there a problem with being thinner than OEM?

I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance. View detail

More rust-resistant than OEM Product

I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail

Easy Pon-mount LEDs

LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail