Reviews
As the name implies, sturdy
The padlock part is very rigid and can't be broken down in a short time, and the chain part is wrapped with a fabric cover to reduce the risk of scratching the body or wheel. The red color makes it stand out. The length of the chain is 1.8m, which is not long enough to lock one car, but it is just right for locking other cars together. View detail
Thin and sufficient thermal protection
I bought this because I wanted a neck warmer to wear with my Jet helmet in the winter.
It is quite thin but has a warm lining.
Even with the nose covered, it does not interfere with wearing Helmet.
Also, the bottom is long enough to cover the neck.
The upper part is a bit tight, but it keeps it firmly in place and prevents wind from entering.
This was sufficient for city driving on main roads.
View detail
Cospa best
Transfer to a vehicle without Grip heater,
I bought these because my fingertips get cold even with winter gloves.
Installation is easy, anyone could do it in 5 minutes.
I was worried that the Handlebar Cover would be difficult to remove and insert my hand.
This product is well molded and does not get stuck when you put your hand in it.
The feel of the controls is fine for Lever, but Blinkerretc. is a bit difficult to press.
I used it for touring on a day when the temperature was below 10 degrees Celsius during the day.
(I would say (with summer gloves) not quite warm, but not numbingly cold.
Grip, I feel like I've been freed from the worries of choosing Gloves.
View detail
Necessary and sufficient
Cost performance is enough for me, and I carry it in my bag as a necessity for long distance riding. View detail
Blinker is hard to operate.
We had been using Komine's Neoprene fabric, but it was deteriorating badly over time, so we decided to replace it.
The previous version had a large hole in the Grip section so that the BlinkerButton could be inserted into the Cover, but this version does not allow it.
When I try to operate the Blinker through the Cover, it presses the HornButton.
My Motorcycle is a 2019 HondaCB650R
I don't know if it's because the BlinkerLever and HornButton positions are reversed on recent Honda Motorcycles.
View detail
Chain lock with excellent cost performance
This is the best solution for those who are worried about inexpensive wire or chain locks, but do not need something too heavy that does not match their motorbike.
It is long enough to connect to other Motorcycle and easy to earth lock.
The weight is not too heavy and is easy to move, so it is not a hassle to take in and out.
The keyhole is expected to be durable, in part because of the Cover, which makes it difficult for Garbage to enter.
View detail
Good Cost performance
I bought it early because I knew my hands would get cold when I commuted to work.
I use Summer Gloves because the Blinker is tough to operate with the heavy Winter Gloves. I have been using it for about 3 weeks, including rainy days and extremely cold days, and I have no problem at all on rainy days; I can only feel the coldness of the lever because it is Summer Gloves, and I have no problem putting my hand in and out, which was my main concern. I was considering purchasing electric heated gloves, but I think this Cover will get me through. I am concerned about some details, but considering the price, I think it has excellent cost performance.
View detail
This is a mounting bracket for the same manufacturer's Smartphone case.
[How is it used?
I purchased a Smartphone case named "Adventure Large Land" from LEAD Industries and attached it to my Motorcycle with a Mount bar. Come on, let's install it!" And when I took it out of the box, I found only the Smartphone CaseSingle Body and no Bracket for installation!
Read the description on the back of the Package. Please purchase the bracket of your choice separately. I bought this product again because it seemed to be convenient for my own use in the product introduction section of Webike.
Was the one you received as per Image?
It looks exactly like the image shown in Webike's product introduction section.
It has a clamp that can be easily fixed to a handlebar or mantlebar, and an articulated mechanism that allows it to be moved to any angle, with a height of about 6 cm from the clamp.
Most of the parts are plastic, but the product seemed to have some strength and was exactly as shown in the Image.
Was the installation difficult?
Fix the Clamp to the Handlebar, Mount Bar, etc. at the desired location (where it will not interfere with driving) (be careful not to over-tighten the screws), attach a Smartphone Case, etc. that is compatible with this product, adjust the angle to your liking, and fix it in place. It is a simple and easy process.
How was your experience with it?
It is very easy to use because it is highly universal and has a wide range of movement at the top, as it can be mounted in most Large Pipe-shaped places of around 22mm.
Since the material of each part is plastic, the torques should be carefully managed when tightening.
[Included Parts:were they on?
BracketBody for installation and a simple Instruction Manual/Spec.
[Was there anything that disappointed you?
None
LEAD Industries. Adventure Large Land. There are several other types of brackets available, so please select and purchase the one that best suits your purpose of use.
Other items that would be helpful
Point and hang of installation
As noted above, fix with proper tightening Torque.
Plastic, especially in winter, can be cracked unexpectedly easily if it is over-tightened.
[Availability and clarity of the Instruction Manual
A simplified Instruction Manual is available. First-time installers should read it carefully before proceeding.
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
If you purchase the Smartphone Case etc. that you want to install together, you can work smoothly and without time loss.
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
CaseSingle Body products and mounting brackets are sold separately.
[How is it used?
I am a middle-aged motorcycle rider who has just now started installing Mount bars on my motorcycle.
I was looking for a USB Power Socket and Smartphone Holder for the Mount bar, and I found a lot of information in Webike's product introduction section.
A friend of mine who was using a Smartphone Holder with an exposed type of phone lost his phone while playing in the mountains (luckily, he was able to find and retrieve it afterwards), so I was looking for a waterproof case type because I was worried about the exposed type. I was looking for a waterproof case type. Adventure Large Land. I found a product called "The best of the best," and coupled with the low price, I bought it.
Was the one you received as per Image?
Was it because I was new to Smartphone Case? Is it because I bought it without reading the product introduction section carefully? The product I received was Smartphone Case I was surprised to see that it was a Single Body product, and when I reviewed Webike's product introduction section........................... Mounting Bracket sold separately. It was stated that
I have no problem with the product due to my lack of confirmation as the purchaser (I purchased the bracket for installation at a later date), and I can confirm the waterproof function even when driving in the rain during touring. Smartphone Case I thought that the reliability of the product as a type of product was fully met.
Was the installation difficult?
Optional Base for mounting to the Mounting Bar, align the back side of the product Body with the claw of the Mounting Base and lock it in place, and you are done.
If you are worried about risk of falling, you may feel a little safer if you fasten a Nylon Spring style Key Holder sold at 100-yen Shopetc. on the zipper and body side.
How was your experience with it?
The response of TouchSensor becomes slow even if you are wearing Gloves for smartphone Touch due to the convenience of putting it in a Case (there is no problem when you take off the Gloves and operate it with your bare hands), and if you tend to be irritated by this part, you might want to purchase a Holder of the type that is fixed bare. If you tend to be annoyed by this part, it may be better to purchase a Holder of the type that is fixed bare.
[Included Parts:were they on?
Smartphone CaseBody only.
After considering various usage conditions, the Bracket for installation is sold separately. Please purchase additional items to suit your needs." Is it something like that?
[Was there anything that disappointed you?
Not particularly
When opening the package after purchase. There's no Bracket in the box! I was surprised, but when I confirmed that the company sells several types of brackets for installation and that the individual prices are reasonable, I understood that the concept is as described above.
Other items that would be helpful
Point and hang of installation
Not particularly
The connection part of the mounting bracket is plastic, so be careful to attach and detach it carefully.
[Availability and clarity of the Instruction Manual
I think there is an Instruction Manual on the back of the package....
[Notes]
I think Large is sturdy if you pay attention to what I have described in places above.
[ITEMS TO BUY TOGETHER
First of all, it is sold separately. Mount Bracket for mounting Without this. Just a Compact Smartphone Case" The result will be a
[Opinions and requests to Manufacturer
Please continue to develop the lineup at relatively Reasonable prices.
View detail
Very warm, but Brake return is poor.
I installed it on a PCX125 Initial Model.
I have been using winter gloves for winter, but my hands get cold after running for a long time with them, so I decided to buy these for a trial run, which are less expensive than electric gloves and grip heaters and seem to be more effective.
The installation itself on the PCX125 can be done without any problems.
However, since the return of Brake will be slower, there may be times when Brake is applied without being noticed.
I can't say it's all due to this product, as I also have a knuckle guard installed, so maybe that's having an effect...
The effect was quite high, and even at this time of the year in December, I had no problem at all with just one thin Gloves.
If the temperature becomes so cold that I feel cold even with this, I plan to use it with hot hand warmeretc. but I am satisfied that it has been more effective than I had expected.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
Daily use.
I bought this for spare parts.
I searched for it but didn't find much on the web, so I bought it here.
View detail
Daily use.
I bought it because it broke when I loosened the Bolt in Shield Maintenance. View detail
Countermeasures against the west sun
It is mounted on a LEAD APRETJet helmet.
I have been using Smoke Shield for a long time because I still get dazzled by sunlight when I run during the day.
This was my first LEAD product and it was pretty dense. [Color] It's Smoke, similar to Company A's darkest, until now, in the evening. [Color] I had replaced it with ClearSEEDle, so I thought it was a good idea, but to my surprise, the SEEDle could not be removed and attached with one-touch, so I had to remove the Screw and replace it.
Well, it's OK because it doesn't take more than an hour to do the work, but if you don't replace the parts before dark, it will be a problem if you drop the parts on the road.
View detail
No wetting?
We used it for an overnight Touring.
Even when it rained, I was able to run without getting my boots and even my socks wet. (If it rained only one day, I would still go running the next day, and if I got my boots wet, my mood for the rest of the touring would be downright miserable.)
I measured the outside Size of the Boots and purchased them, so the fit is almost perfect.
The Magic tape holds them securely in place, and when worn under the Rain jacket pants, they will not flop around when running.
The Elastic band can also be folded for compact storage.
We have some concerns as we continue to use the product.
Rubber bottom, Elastic band durability (if you commute in the rain, you will be especially concerned about how long it will last)
However, it looks like we won't have to worry about replacing it for a while.
I don't feel like stepping into a footpeg.
The bottom of the Rubber is flat, so I felt that the footpeg has a thin feel when stepping on the footpeg. Scooter does not seem to have anything to do with this area.
View detail
About Dark smoke
I use a Bell Helmet when I go Touring, but I use a LEAD Industries Helmet when I want to ride Motorcycle in a Showa era atmosphere. If you ride at night, you should definitely not use Dark smoke. It is quite dark. It is nice and not glaring in the mid-summer sun. I can also recommend it to people who don't want to show their faces. (Laughs) View detail
Try it
It is quite heavy and firmly. It is long, so it is good to wrap it around something. However, since it is a key, it is a bit cumbersome, and for those who are lazy, I recommend the encrypted Chain. View detail
If you're looking for a cosmetic, there might be one, but ….
There is a slight reinforcement where the shift lever hits, but it is not expected to be durable.
It can be installed with boots on, but I think it requires a lot of hang. (I think the style of the boots is poor when worn.)
The price is good if it is only for sudden rain.
By the way, it rained quite a bit, but there was no seepage at all. (It is functional.)
Next, we will choose the best-selling Manufacturer's products. After all, cheap products are just as good as they are.
View detail
Replacement brings Helmet back to life!
Since this is the part that deteriorates the most, Helmet was revived after the replacement.
Hold of the whole Helmet is also getting better, and if you start to worry about deterioration.
Early replacement is recommended.
It may be a little hard to remove, so be careful not to damage it.
Required.
View detail
Nice and dark, highly recommended!
I was worried about how dark it would be, but I can see well at night and it is nice and dark.
Quantity of aluminum ring and base plate (sold separately):Simultaneous replacement with Set is recommended.
is
If a small amount of silicon grease is applied before replacement, the movement will be smooth.
View detail