Reviews
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
RCH-01
The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
Great part
Very good piece, original Honda, and new. It has an excellent finish. Very much Reliable. It fits, with high precision, on my motorcycle. I recommend her. View detail
Excellent piece
Very good piece, original Honda, and new. It has an excellent finish, and also comes with a genuine gasket. Reliable. It fits exactly on my motorcycle. I recommend her. View detail
Excellent
Genuine Honda part, and new; from long-term stock. It has a good finish and fits perfectly on my motorcycle. Great. I recommend it. View detail
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
I purchased the Motorcycle Cover because it was out of date.
The handling is very easy and the double structure is very good for a Full Cowl Motorcycle Cover.
Also, GSX1300R HAYABUSA (Type 2) I was able to install the Cover with the GIVI Top Case Bracket still in place.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
This is what it looks like when installed on a KTM 2013 DUKE.
This is what a BMConti2-type Handlebar looks like when attached to an Initial ModelDUKE. Finger is about the same height as Limit. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Match CB1100 Fork with Initial ModelABS.
[How is it used?
The normal fork of CB1100 except RS has a caliper pitch of 62mm and 80mm. This item is for CB750 (RC42 ) It corresponds to 80mmPitch as well as etc.
The caliper side is compatible with bremboAxialCaliper 40mm.
Was the one you received as per Image?
The product seems to be Active and is working well with no accuracy or quality issues.
Was the installation difficult?
It is a Bolt On, so it is easy to install. In my case, there was a slight interference between the Caliper and the disc mounting Bolt base of the Wheel, but I was able to get it out by shifting it slightly.
How was your experience with it?
Since the Caliper position is at the top compared to the Fork of the 62mmPitch, it can go without the Hose extension. It also looks more natural.
[Included Parts:were they on?
In addition to the Instruction Manual, Bolt and Shim are included.
[Was there anything that disappointed you?
The quality of the product is not particularly problematic, but the high price is disappointing.
The recent price increase due to price revisions has made it even more expensive.
The same manufacturer's support with a 62mm pitch is often available, but the 80mm pitch one here may be special and is not available at all in the second-hand market.
View detail
Fits: HONDA CB750, HONDA CB750L (license training vehicle)
To MAGNA50.
Cheap!
Fast arrival!
Good texture!
No complaints!
View detail
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
Replaced with a new one
Cheaper than OEM, but quality is sufficient to replace NTB nature
Stable quality.
View detail
Good position
I came across this product after doing a lot of research on the height and width of the Japanese Vehicle Inspection Correspondence on the CB750rc42.
The width is the same and the height is about 35mm higher than the other two, so I asked the shop that installed it to check if they had done the same thing and since it was compliant, they installed it without refusal.
Extension Harness was also prepared in case, but it was used only for Blinker switchWiring extension.
For this level of uplift, it would have been more cost-effective to just extend the Blinker switchWiring than to purchase Extension Harness.
The position is only 35mm up, but it feels much higher, and the handlebar feels a little tighter in the front, so it is very easy to drive.
It is as easy as if it were a learner's car, but the system is also very windy as it approaches vertical.
I am self-satisfied, but it was a good decision to replace it because it is totally easy to drive and maintain a non-fatiguing position.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
I wonder if the hardness will engulf the sand.
Since it is thick and not flexible, sand etc. will be caught by the wind from under the Seat and will dance inside the Seat when it is near a field, etc. It prevents rain, but when the wind blows, rain will naturally enter from underneath and dance inside the thick Covers. It prevents rain, but when the wind blows, rain naturally enters from below and dances inside the thick cover, making it quite damp. When the sun shines, it is necessary to remove the Seat to dry the Motorcycle. I wish I could use several of them. View detail
For CB250F
Same as the genuine Front Fork Dust Seal . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail