Reviews
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
since it is a grip which is likely to be easy to grasp, after exchanging, what touch it is not on touring -- for the moment [ ?? ] from a normal grip, it is O.
since it is a grip which is likely to be easy to grasp, after exchanging, what touch it is not on touring -- for the moment [ ?? ] from a normal grip, it is O. View detail
CB750 in 2001 to 2003 is the specification whose cost is most cut down in RC42 put on the market from 1992 to 2008, and is a type without the reserver tank of rear suspension. Since attenuation lost its effect by six years of use, when the price of th
CB750 in 2001 to 2003 is the specification whose cost is most cut down in RC42 put on the market from 1992 to 2008, and is a type without the reserver tank of rear suspension.
Since attenuation lost its effect by six years of use, when the price of the rear suspension with a showa reserver which is the brand-name parts in 2004 and afterwards is checked, it becomes clear that it is higher than OHLINS.
It purchased without wavering.
it also changes lanes and changes that attenuation is well effective, and passes and runs if it is a good pavement way of a state although the initial motion from OG to the entrainment 1G may move flexibly and it may be felt harder a little in proportion to the roughness and speed of a road surface at the time of a run -- etc. -- improvement in a response was felt.
Since setting is also already united with vehicles, it is also an agreeable impression that it is OK in bolt-on.
Although it is by no means cheap shopping, I think that it is not betrayed by the quality.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Pro grip: It is exchange from #719 Black / blue. Although it became touch [ adult / in atmosphere ], a grip has no problem truly, but is front one of neither vibration absorption nor a point feeling up?
Pro grip: It is exchange from #719 Black / blue.
Although it became touch [ adult / in atmosphere ], a grip has no problem truly, but is front one of neither vibration absorption nor a point feeling up?
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Since it begins to ride Ninja250R, a thing like the numbness of a knuckle is felt, and I am recommended, when it thinks whether there is any good thing and is. It seemed that it was normal, that with which it is equipped had thin wall thickness, and t
Since it begins to ride Ninja250R, a thing like the numbness of a knuckle is felt, and I am recommended, when it thinks whether there is any good thing and is.
It seemed that it was normal, that with which it is equipped had thin wall thickness, and the effect of suppressing vibration was weak.
Although i grip becomes wall thickness compared with normal and a path becomes somewhat thick, it grasps that it is unexpected and is refreshing.
Moreover, I feel that it is connected with the merit of the grip feeling that there is moderate hardness for this grip.
Although the grip by the side of a clutch lever is exactly good die length, since the grip by the side of a throttle can do an around 5-mm crevice, it is somewhat sorry about the point.
Although there is a place which appearance worries in such a sense, the numbness by vibration was also lost and it is satisfied with that which also says a grip feeling.
View detail
It is a style although it is regrettable that an exhaust pipe is not titanium. It is a muffler with which it can be satisfied of the engine performance.
It is a style although it is regrettable that an exhaust pipe is not titanium. It is a muffler with which it can be satisfied of the engine performance. View detail
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
It attached to HORNET250. At 11 mm, since the thing of the size had only the short lever type, the pure master chose a 1/2 inch (about 12.7 mm) thing. A little, since size up was carried out, effectiveness of a brake became good. Moreover, it
It attached to HORNET250.
At 11 mm, since the thing of the size had only the short lever type, the pure master chose a 1/2 inch (about 12.7 mm) thing.
A little, since size up was carried out, effectiveness of a brake became good.
Moreover, it does not control and burn and is large satisfaction.
The seen touch is also racy and pleasing.
Since attachment removes an authentic positive one and only attaches it by the same touch, it is easy.
Air-bleeding work is quietly difficult.
Compared with a pure tank, it is easy to put in oil.
Since the color was purchased as it is pure, it was attached comfortable.
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
if pure OH kit writes about 4000 yen and is right -- it attached as pure substitution of GS750 by saying. The first selling point of this product is a low price first. If you can buy the master made from a nisshin for 13000 yen, I will think that
if pure OH kit writes about 4000 yen and is right -- it attached as pure substitution of GS750 by saying.
The first selling point of this product is a low price first.
If you can buy the master made from a nisshin for 13000 yen, I will think that it is splendid.
And the engine performance also has no complaint.
Although I think that a difference is not understood at all by the vehicle type at which the width type master has arrived with the current car, I think that a being clear difference is known in the case of the old vehicle.
Although it was the width type structurally same, of course, this one of the touch was a top from what OH(ed) an authentic positive one firmly.
The fine place will evolve also with the same configuration too at the product of 20 years or more ago, and Kon's thing.
I think that it is worth attaching the one aside from those who want to surely adhere to pure appearance where pure OH kit is more expensive.
A good point does not break down sushi and atmosphere, either, without appearance is also more astringent and being conspicuous.
This product is buying it!
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Colet was encountered when looking for the grip which matches the color of a car body, and the design. When equipping, it became the touch which may match splendidly. It is five star without a complaint. However, we can recommend you no vehicl
Colet was encountered when looking for the grip which matches the color of a car body, and the design.
When equipping, it became the touch which may match splendidly.
It is five star without a complaint.
However, we can recommend you no vehicle types.
I recommend you to equip with the balance of a car body and a color by Kami who thought well.
View detail
Fits: SUZUKI Gladius 400, SUZUKI Impulse 400, TRIUMPH SPEED TRIPLE, YAMAHA SR400, YAMAHA SR500, YAMAHA FZ1, HONDA CB500X, HONDA CB500F, HONDA Hornet 600, HONDA CB750, HONDA CB400SS, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1000R, BMW R1200R, BMW F800R, DUCATI monster, KAWASAKI ZRX II, KAWASAKI Z750, KAWASAKI Z1000
It purchased to SR400. Since structure was more smallish, it was dared to set to 2L of an oversize to attach the wide trucker bar and the cheap motorcycle cover which was being used until now. This product is not skimping on cloth and covers it en
It purchased to SR400.
Since structure was more smallish, it was dared to set to 2L of an oversize to attach the wide trucker bar and the cheap motorcycle cover which was being used until now.
This product is not skimping on cloth and covers it entirely to lower [ of a tire ].
2L was too large to SR that much.
L is enough.
Those who consider purchase need to refer to it.
However, cloth feels that it is a little thin considering a price.
Probably it was not necessarily good, when thick, but it was a little worrisome.
A using feeling is good.
Order is intelligible, it extracts forward and backward, and there is a hole for Locke.
Functionally, probably, it will be perfect.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
In the grip used until now, it is the highest category. Although it is a simple design, they are parts which can contribute to a positive accelerator operation. Since it was the always grasped portion, Colet was chosen and it was a correct answer.
In the grip used until now, it is the highest category.
Although it is a simple design, they are parts which can contribute to a positive accelerator operation.
Since it was the always grasped portion, Colet was chosen and it was a correct answer.
the grip which often exists when it becomes old -- it can also delete -- it turns out that MONO with the few and sufficient quality of a rubber is used.
It met with the good thing.
View detail
Fits: HONDA VT250F/Integra, HONDA VT250F/Integra, HONDA VT250F/Integra, HONDA PC800 Pacific Coast, HONDA NSR50, HONDA MBX50, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA GB250 Clubman, HONDA CBR400R, HONDA CBR400R, HONDA CBR400F, KAWASAKI Varios 2, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 1100, KAWASAKI ZXR400, KAWASAKI GPZ900R
The main jet throw jet for honda forzas was purchased. By having attached the muffler type air cleaner, idling became unstable, came to carry out after-fire, or wrote, and resulted in attachment. Since use is the same as a pure plan, it is bolt-on
The main jet throw jet for honda forzas was purchased.
By having attached the muffler type air cleaner, idling became unstable, came to carry out after-fire, or wrote, and resulted in attachment.
Since use is the same as a pure plan, it is bolt-on, but the recommend of getting a knowledgeable direction and a motorcycle store to work in attachment is carried out.
Since a gasoline may leak if setting does not suit, please take care.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
It was hung by the price and purchased. It was light touch rather than he thought that the touch seen with the photograph was actually seen although texture was also felt good very well. But since the price was a price, it was shopping of convicti
It was hung by the price and purchased.
It was light touch rather than he thought that the touch seen with the photograph was actually seen although texture was also felt good very well.
But since the price was a price, it was shopping of conviction.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA RVF400, HONDA VFR800, HONDA VTR250, KAWASAKI ER-6f, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z750
[Good point] The quality of the dress-up effect (authentic positive one is awkward at black plastic) (2) plating of the circumference of easy (2) handle up of (1) wearing is good at one plus driver, and a [bad point] price also without peeling is high.
[Good point] The quality of the dress-up effect (authentic positive one is awkward at black plastic) (2) plating of the circumference of easy (2) handle up of (1) wearing is good at one plus driver, and a [bad point] price also without peeling is high. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
If an authentic positive one is a width type type, I will think that it is difficult to feel change by changing dramatically being efficiently pure at least by appearance by exchanging for this. Probably, it will be better to have done money to a slig
If an authentic positive one is a width type type, I will think that it is difficult to feel change by changing dramatically being efficiently pure at least by appearance by exchanging for this.
Probably, it will be better to have done money to a slight degree and to exchange to a semi-radial radial pump master, if engine-performance UP is considered and exchanged.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CB900HORNET, HONDA CBR1000RR, HONDA CBR1100XX, HONDA CBR600RR, HONDA DN-01, HONDA HORNET250, HONDA HORNET600, HONDA RVF400, HONDA VFR800, HONDA VTR250, KAWASAKI ER-6f, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z750
It attached to Triumph SPEEDTRIPLE. Since it is exchangeable for a pure cap with one driver, it is overly easy. Although nothing changes functionally, the custom-made nature of appearance goes up exchanging for pure black very well. As a one p
It attached to Triumph SPEEDTRIPLE.
Since it is exchangeable for a pure cap with one driver, it is overly easy.
Although nothing changes functionally, the custom-made nature of appearance goes up exchanging for pure black very well.
As a one point of the circumference of the handle which always goes into a visual field, the degree of satisfaction after wearing is rather high.
The stuck motorcycle is also seldom seen.
View detail
Fits: YAMAHA Cygnus X SR, HONDA XR50 Motard, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI DR-Z400SM, SUZUKI RMX250S, SUZUKI SV400, SUZUKI GS125, SUZUKI GS125E Katana, SUZUKI RMX250, SUZUKI GSX250S Katana, SUZUKI RG200
It exchanged for the front brakes master cylinder of NINJA250R. The span of adjustable range of a lever thinks that it was large and effectiveness of a brake became good from pure parts. I would like to exchange ZZR400, if an exchange lever is che
It exchanged for the front brakes master cylinder of NINJA250R.
The span of adjustable range of a lever thinks that it was large and effectiveness of a brake became good from pure parts.
I would like to exchange ZZR400, if an exchange lever is cheaper.
View detail
Fits: HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F, HONDA CBR400F, HONDA CBR150R, HONDA CBR125, HONDA CBF600, HONDA CB350, HONDA CB250RS, SUZUKI GSX400
Since it was thick compared with the ordinary grip when grip exchange kana has almost already been thought, and it found being attached to the motorcycle of the medieval times of a nearby motorcycle shop and having been grasped, since it was apt thickness
Since it was thick compared with the ordinary grip when grip exchange kana has almost already been thought, and it found being attached to the motorcycle of the medieval times of a nearby motorcycle shop and having been grasped, since it was apt thickness, it purchased for itself. [ with a large hand ]
Although a grip feeling is good, since MAME will be made if it got hot when it was neglected under the blazing sun and has ridden for a long time empty-handed since the surface is neither a rubber nor sponge, cautions are required.
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
99ZX-9R was equipped. Although it compares with every normal width and neither effectiveness, nor control nature, the amount of strokes, etc. feel change so much, since it is a new article, there is a feeling of a fresh. I think that it is worth a
99ZX-9R was equipped.
Although it compares with every normal width and neither effectiveness, nor control nature, the amount of strokes, etc. feel change so much, since it is a new article, there is a feeling of a fresh.
I think that it is worth attaching drastically in the direction which considers OH, and the direction out of which distance has come since it is budget prices.
It is for interfering with a meter in the full lock this side which changed the location of the lever in wearing.
Since accelerator operation was affected, it is due to improve from now on.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
The feeling which is soft and adapts itself to a hand is GOOD. The fatigue of the hand at the time of a long-distance race line reduced clearly. Vibration is also absorbed just for a moment? A dissatisfied point is not found. those whom a char
The feeling which is soft and adapts itself to a hand is GOOD.
The fatigue of the hand at the time of a long-distance race line reduced clearly.
Vibration is also absorbed just for a moment? A dissatisfied point is not found.
those whom a character and a point worry can take immediately, if it rubs with the cloth which attached the parts cleaner -- w
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB750
Although the result had heard that it was not good, the result thinks that it was good rather than considering.
Although the result had heard that it was not good, the result thinks that it was good rather than considering. View detail