Reviews
Handlebar Cover is pampered
However, these are Handlebar Gloves, so they are safe.
I was able to install the GIVI Hand Guard ExtensionEH5108 with no problems.
View detail
Tour NSR
I installed it on my NSR as a DIY project.
We used it for 4 nights and 5 days touring from Kanagawa to Lake Biwa.
Unlike TouringBack, Large worked well in the rain!
View detail
R1 looks more like a deep-sea fish.
[How is it used?
Regarding the OEM Headlight Bulb, I have no practical problem with it, but I purchased it for color matching with the Position bulb.
Was the one you received as per Image?
No problem
Was the installation difficult?
The process is to put the removed part back in place, but it is recommended that you take a picture of the bulb before removing it, as you will not know the orientation of the Bracket that holds the bulb in place.
How was your experience with it?
In comparison with the OEM, the OEM seems to be more luminous, but after replacing both eyes, I felt no particular problem.
It does not correspond to Japanese Vehicle Inspection.
[Included Parts:were they on?
It is a light bulb only, so there is no problem.
[Was there anything that disappointed you?
Since it is a twin-lens light, two are needed, which is a reasonable expense.
Quantity for Binocular Light:I thought it would be easier to purchase if there is 1 Set of 2pcs. for sale.
View detail
Easylock BF11
I think the price is too high, even if it is unavoidable due to the model-specific nature of the product. View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
It was scrap iron.
The BMW OEM drain plugs screwed right into the new oil pan without any pain to the female screws.
The Oil Drain Plug of SIEBENROCK does not function as a Screw because the Screw threads near the tip of the Screw have become dull.
Material with iron Drain plug:It is Garbage that exists to destroy Aluminum's Oil pan.
The magnet that comes with the Drain plug is also weak and does not have the necessary capacity.
There was no M18P1.5 dice, so I installed a screw cutting byte on the lathe and modified the tip of the screw section. The tip can be screwed in, but the turning force becomes heavy from the middle of the screw and the accuracy of the screw pitch seems poor.
I am not considering returning it because I post-processed it to make my own modifications to the product, but it was Garbage that had to be thrown away.
View detail
![PIN SYSTEM SHAD Product Number [X0SE04P/X0SE10P/X0SE16P] Exclusive Fitting](https://img.webike-cdn.net/catalogue/images/48356/13936747_1_TS.jpg)
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI INAZUMA750, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SV1000
circumstances being favorable (advantageous)
There is no discomfort in the Large shape, and it is just the right Size.
Key insertion and removal is not smooth.
It seems a little tricky.
Maybe if you use it, it will work better.
View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
Not compatible with K1200RSFirst Model Type.
Not compatible with K1200RSFirst Model Type (1998). View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, HONDA CBF1000, HONDA CBF1000, HONDA CB650F, HONDA CB750, YAMAHA XJ6DIVERSION, HONDA CB1300SUPER BOLDOR, HONDA CB500, HONDA CB1300SUPER BOLDOR
Touring and commuting.
The Helmet also has a quantity, depending on the shape.:1 Set of 2pcs
As for Waterproof, there was no flooding even after driving in a reasonable amount of rain.
I could easily fit a helmet, a jacket, and gloves in it, so I could easily fit a pair of shoes in the Pannier for a day trip up a mountain.
The price is moderate because a dedicated mounting base is required, but it is a reasonable price considering the convenience of this product.
View detail
![Aluminum Mono Key Case [DLM30A]](https://img.webike-cdn.net/catalogue/images/34518/95038_01_TS.jpg)
Fits: YAMAHA XJ6DIVERSION, YAMAHA XJR1300, YAMAHA XJ600, YAMAHA XJR1200, BMW R1100R, SUZUKI BANDIT600 (GSF600), YAMAHA XJ6DIVERSIONF, BMW R1100S, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA XJ6DIVERSION, DUCATI MONSTER1100EVO, YAMAHA MT-03, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-10
Rugged Trunk
I bought the GIVI Aluminum Mono Key tail box on webike. I have been paying attention to this tail box before. The domestic price is very expensive and I have not bought it. I saw the price on webike and placed an order. The workmanship of the tail box is still good, and the capacity is also good. big enough. Usually, you can put a helmet, car clothes and other items. If you have a demand for capacity, I recommend this one. Although it is relatively large, it can really hold it. -------------------------------------------------- -------- I bought the GIVI Aluminum Mono Key rear box I bought at Webike. I have been paying attention to this tail box before. The domestic price is very expensive. price is good on the Webike, the price is placed. big enough. Usually put a helmet and car jackets and other items can be put. If there is a demand for capacity, this one is more recommended. Powered by Google Translator View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Mono Key type security!
Installed on BURGMAN 400.
I don't do Tandem riding, so I think 40L capacity is enough for me. the OEM specified box is 47L Large type, but the price is also Big, so the price is also Big at Monokey.
I chose V40 because it is more affordable. monokeyCarrier, an option of SEA BASS, is made of steel and looks very strong.
View detail
Fits: BMW R850RT WITH INTEGRAL, BMW R850RT, BMW R1200GS TRIPLE BLACK, BMW R1200GS, BMW R1200 S, BMW R1200 ST, BMW R1200 RT, BMW R1200 HP2 MEGAMOTO, BMW R1150RT WITH INTEGRAL, BMW R1150GS ADVENTURER, BMW R1150GS, BMW R1100S WITHOUT INTEGRAL, BMW K1300S, BMW K1300GT, BMW K1200S, BMW K1200RS, BMW K1200GT WITH INTEGRAL
good on cost
Used for Caliper which was diverted.
I am quite happy with this Gold amount.
Control is not a problem at all for city driving, and it works normally.
I don't know about the durability yet, but I will Repeat to see how much it will decrease in the future.
View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Once you use it, you can't stop.
I had a lot of trouble with Monokey, Mono-lock, and capacity, but settled on MonokeyV40.
The deciding factors were the price, which is less than 20,000 yen for a Monokey, and the perfect large size.
In terms of capacity, there is a little room for a Helmet and Rain Coat.
As for the helmet, the X14 XL fits perfectly when placed horizontally, and the lid will close even when placed upright. (If you want to place it upright, change the orientation of the helmet.)
The Mirror position of the GSX1300R HAYABUSA is low and the box is rather high, so I was worried about the reflection on the Mirror, but the V40 is narrow and the edge of the box is only slightly visible.
I am not dissatisfied, but the box is attached to the rear side, so the overall length is longer, and I have to be careful when backing up.
Overall, we are very satisfied.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX750F, SUZUKI GSX600, SUZUKI GSX600, SUZUKI GSX650F, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX750F, SUZUKI GSX650F, SUZUKI GSX1400, SUZUKI GSX750F, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR750, SUZUKI GSX-S1000, SUZUKI GSR750, SUZUKI GSF1200S, SUZUKI GS500, SUZUKI GSF1200, KAWASAKI NINJA400R
Reliable construction
It is new from E52 after 11 years. The construction is solid and I have no worries, but the installation to Base is harder than the previous one, so I have to open the lid and push the inside bottom to install it. I am hoping that it will get used to it in the future. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, SUZUKI BANDIT600S (GSF600S), HONDA CBF500, YAMAHA FAZER8, HONDA CBF1000, HONDA CBF1000, HONDA CB1300SUPER BOLDOR, HONDA CB750, HONDA CBF1000
Matching like an OEM
Installed on HondaFORZA250.
I like the color and appearance of the MATCH as if it were OEM.
It is reliable with no vibration etc. when running.
IMPRESSION DETAILS
0Base (sold separately)
We wanted to keep the height as low as possible, so we installed the Universal type Monokey base on the FORZAOEM Carrier, and it was installed as low as we wanted it to be.
I have not been able to find a Universal type Monokey base from Daytona. Webig does not sell them, but GIVI does, so I looked elsewhere.
I did not need a bracket in two places, and in the other two places, I connected the bracket with a slight slant.
Since the Monokey base is large, the Bolt connection with the Carrier was made as wide as possible to ensure good balance.
The Bolt threads do not reach the Nut loosening stop due to the lack of length of the Bolt in this diagonal section. (Bolt will be replaced again).
0Stop lamp (sold separately)
https://www.webike.net/sd/21113309/
Please check out our impressions on ↑ as well.
I think a retrofit Tail lamp is necessary because of the proximity of the Carrier and Box to the Stop lamp.
0BOXBody
The storage is not so good due to the many irregularities inside.
I have a 2mm thick non-slip Matte from 100s on the bottom of the box. I think that's why ↓
I have a GT-Air2 and NeoTEC2 from SHOEI and the lid does not close. (Please check by yourself).
I am thinking that I could have bought a 1Size larger one, though I might be able to store two helmets if I pushed myself. I am also thinking that it would have been better to buy one size larger.
I like the balance of the appearance, including the large size.
I use it in the summer, but I have to be careful when putting food in it because it gets hotter than expected.
that's all
View detail
Fits: BMW K100/LT/RS/RT, BMW K1200GT, BMW K1200LT(115PS), BMW K1200LT, BMW K1200RS, BMW K1, HONDA C2T, HONDA CRF150F(Reimport), HONDA FORESIGHT/SE/EX, HONDA FORZA 250/S/T/ST/X, HONDA FORZA X/Z, HONDA FREEWAY250, HONDA FUSION250/SE, HONDA FUSION250/X/XX, HONDA GOLDWING GL1500/SE, HONDA HELIX, HONDA NV400STEED, HONDA NV600STEED, HONDA PACIFIC COAST(PC800), HONDA PS250
Not suitable for Carburetor Vehicles
Carburetor Vehicles are not suitable.
The actual lifetime of the Standard Plug BP5HA is longer than the Standard Plug BP5HA, which is more comfortable to use.
Carburetor Vehicles cannot be perfectly adjusted to one year's conditions, so there are times when they are covered, and the Standard Plug BP5HA is more reusable and in better shape under those conditions.
View detail
![Aluminum Mono Key Case [DLM46A]](https://img.webike-cdn.net/catalogue/images/34518/95036_01_TS.jpg)
Fits: YAMAHA MT-07, HONDA NC750X, YAMAHA MT-07 TRACER, HONDA NC750S, YAMAHA FZS600FAZER, YAMAHA MT-03, YAMAHA MT-03, YAMAHA MT-03, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZ8, YAMAHA FZ8, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6-SFAZER, YAMAHA FZ6-S2FAZER, YAMAHA FZ6-S2, YAMAHA FZ6-S2, YAMAHA FZ6-S2FAZER
I was finally able to purchase it after saving up my Gold.
The Dolomites were better suited for my use in terms of capacity and weight. View detail
Fits: APRILIA MANA850, APRILIA MANA850, APRILIA MANA850GT, APRILIA MANA850GT, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SHIVER 750, APRILIA SRV850, APRILIA SRV850, BMW C650 Sport, BMW C650 Sport, BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R1200R, BMW R1200R, BMW R1200R
Helmet storage
[How is it used?
Touring and shopping
Was the one you received as per Image?
It was bigger than expected.
How was your experience with it?
It is easy to use because of its capacity.
[Points to note]
I guess the important thing to note is not to leave the key inserted.
How did it compare to other products?
We compared with other companies, but we decided to go with GIVI.
Other items that would be helpful
Point or hang for mounting/There is no hang as it is mounted on a dedicated Base. Maybe Items/Base or Frame that should be purchased together.
Opinions and requests to Manufacturer A little cheaper.
View detail
Fits: BMW K1200RS, HONDA CBR1100XX SUPERBLACKBIRD, KAWASAKI ZRX1200S, KAWASAKI GPZ900R, YAMAHA TMAX500, BMW F650GS, BMW F650GD, Others
Moving parts.
GPZ900R with Super long I installed it with the Bracket. The view is not as good as the later Mirror, but it is better than the earlier Mirror. The middle Elbow had to be fixed once the position was decided. I thought this part could be movable, but unfortunately, it was not. Also, I changed the screw from a regular silver Hexa to a black-dyed Stainless Steel Button Screw. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, YAMAHA FZ8, YAMAHA FZ6-S2FAZER, YAMAHA FAZER8, YAMAHA XJ6DIVERSION, YAMAHA FAZER8, YAMAHA YZF600 THUNDER CAT, YAMAHA XSR900, YAMAHA XSR900
Since I switched to Adven.
I installed the box for the first time in my life because I switched to VST1000. I used it for shopping, but it is still convenient. I used it for shopping and it is very convenient.
4.There is still room for a 5-liter waste oil box, a 1-liter can of WAKOS oil×3, a small shoulder bag, a plastic bottle, and a paper bag containing two lightweight sweatshirts bought at Uniqlo. If you have a small amount of luggage, you will have enough space to buy souvenirs on a 3-day/2-night touring trip.
View detail