Reviews
No Color, comparable to OEM Product.
After a while after engine OH, oil seal on Generator side and seal on StatorMount started leaking, so I replaced them.
The OEM oil seals that started leaking have only been used for 6 years and 10,000 km since the last OH, and I've treated them with care, but it happens.
The thing itself could be installed without any problems and the leakage was contained.
At the time of purchase, it was much cheaper than OEM, not to mention cheaper than buying a UniversalOil seal, so I was worried.
Not only for OH, but also for normal use, the leakage will suddenly appear one day, and since it is easy to replace, we recommend Stock as a precaution.
View detail
Fits: KAWASAKI ZZ-R1100 (ZXT10D ), KAWASAKI ZZ-R1100 (ZXT10C ), KAWASAKI Zephyr 1100 RS (ZRT10A ), KAWASAKI Zephyr 1100 (ZRT10A ), KAWASAKI GPZ900 R Ninja FNo.ZX900A-056001-, KAWASAKI GPZ1100 (ZXT10E all models)
easygoing
The parts needed for Filter replacement are available, so you don't have to search for part numbers. View detail
MAXAMRotor bolt
Bolt was replaced along with Disc Rotor replacement.
I originally intended to reuse it, but purchased it because the Hex hole was deformed into a gouge.
Quantities of 3-packs:Buy 2 sets
Since it is a KITACO product, quality should not be a problem.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Very common EXGaskett
CROSSCUB110 (JA45) Used to replace the Exhaust System of
I think Gasket is the same for all Manufacturers.
No exhaust leak etc.
It was cheaper than OEM Parts.
View detail
reasonable price
The same shape as OEM, so Air Cleaner Simple Substance with
I don't see any change, but I do feel relieved.
View detail
Reliable K-PIT
Repair Parts at KPIT for your peace of mind.
Purchased to replace Rotor.
View detail
The knock pin are a part that do tend to sustain damage and is advisable to replace when this the case
About quality and texture - The pair of knock pins from K-Pit are made from steel and raw surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The knock pin is a part that do tend to sustain damage and is advisable to replace when this the case. This will ensure easier installation and removal of parts like the cylinder head, cylinder and crankcase halves when it comes time to overhauling the engine, as this is where they are used on the Honda Grom. Products to buy together - Key products to purchase when overhauling the engine would be gaskets and O-rings, all which are available from K-Pit here on Webike for the Honda Grom. Difficulty of installation - The installation of the knock pin is an simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to clean the mating surface and press the knock pin into place. Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the knock pin is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the knock pin, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
all in one
O-ring, Packing also Quantity:Since it comes in a set, it is an excellent product that allows immediate replacement of elements as long as you have the oil.
It may not be necessary for some people, but I think it is a very useful product for beginners.
View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil
The KITACO Ignition coil is made by K-PIT, so it is easy to install as long as you read the instruction manual carefully. View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI D-TRACKER, KAWASAKI D-TRACKERX, KAWASAKI KLX250
normally
Rubber packing is also available in Quantity:Set helped me a lot, and if it's pleasantly cheap, Cost is also ??5 View detail
Fits: HONDA CB250F MC43 all models, HONDA CBR250R MC41 All models, HONDA CRF250 L MD38 All models, HONDA CRF250 M MD38 All models
Purchased for PowerBox installation
Purchased for PowerBox installation.
One piece is all that is needed.
I had a hard time removing the old Gasket.
The new one, after applying liquid Gasket.
If it is attached, it will not come off.
View detail
Used on Gixxer150 (NG4BG type), no problems
Used for Gixxer 150 (NG4BG type).
All the necessary parts for the Oil Filter are included, and all you need is a tool to complete the job. (Also comes with a Drain Washer)
View detail
Fits: HONDA GORILLA 6V FNo. Z50J-1300017-1805927, HONDA MONKEY 6V FNo. Z50J-1300017-1805927, HONDA Monkey 6V FNo. Z50J-1300017-1805927, HONDA Gorilla 6V FNo. Z50J-1300017-1805927
K-PIT K-Pit Ignition coil (B)
I purchased and installed this K-PIT for maintenance of my 6V GORILLA. After installation, I checked the ignition of the plug and it sparked perfectly. The original OEM Ignition coil was over 40 years old, so I was worried about its deterioration over time, but this time I bought it and installed it. View detail
Fits: HONDA Grom (MSX125), HONDA APE, HONDA DREAM50, HONDA MONKEY, HONDA GORILLA
Compatible with KITACO clutch covers.
It has been about 6 months since I replaced the clutch cover with a KITACO clutch cover. After two oil changes during that time, the oil filter was finally replaced.
The work itself is easy, but it is good to protect the filter with dustcloth or something similar because the oil drips quite a bit when the filter is removed.
The removed Filter was quite dirty.
I wish I had replaced it a little earlier.
So, we will continue to confirm Repeat in the future.
View detail
Fits: HONDA XL250S L250S, HONDA NY50 All models, HONDA CROSSCUB110 JA10, HONDA All models of GIORNO CREA AF54, HONDA SUPER CUB 110 JA10, HONDA SUPER CUB 110 PRO JA10, HONDA SUPER CUB series Engine cars (50-100cc), HONDA SUPER CUB series Engine car FI, HONDA Spacy50 All models, HONDA DREAM50 AC15, HONDA Spacy80 All models, HONDA VARIE All models, HONDA MONKEY series Engine cars (50-100cc), HONDA MONKEY series Engine car FI
Exhaust Gasket
It can be used without any problem in Material and Size. View detail
Excellent two-piece filter
Fits: HONDA MONKEY125, HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250L, HONDA SUPER CUBC125, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA CRF250RALLY LD, HONDA ADV150
OEM and highly reliable.
Bolt was also replaced along with the Rotor replacement.
Black Painting to match Rotor.
I don't need to call it a head 10.
View detail
Fits: HONDA SUPER CUB 50, HONDA MONKEY125, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA glom, HONDA DAX125
I'm getting a little worse for wear.
Rubber will wear out and should be replaced regularly. View detail
It was Bolt On.
YamahaRD90 (6V Point plastic mag ignition) The OEM was discontinued, so it was really helpful. View detail
Cospa is nice.
O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it.
View detail