Reviews
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
MONKEY125 beware.
Purchased for maintenance of MONKEY125, such as oil replacement.
Be careful when lowering.
If you lower it too vigorously, your hand may get caught between the Arm of STAND and the License Plate.
Hands get caught, License Plate gets bent….
but with great strength and stability.
View detail
cute little
It is good to have the name CT110 HUNTER CUB written in Retro. View detail
Retro feel is good.
The material of the Key Holder is soft and will not damage the keyhole.
The design is also good with a retro feel.
View detail
ct125
search webike
I ordered a curve keyring.
Small and cute just like the picture
It goes well with the Hunter Curve. I ordered it together.
Raincoat and Kumamon Yoshimura Backpack
I like them all, the price is good and the quality is also good
Actual photo attached
Take care and prosper
I ordered another product, but I want to get it ------------------------------------------ ---------------- Webike I ordered the curve key ring It's small and cute like a picture It goes well with Hunter Curve. I ordered together Rain and Kumamon Yoshimura Backpack Everyone likes it all. The price is good and quality is good Licent photo Please look pretty and flourish I ordered other products, but I want to get it. Powered by Google Translator
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA dachshund, HONDA Shirley., HONDA XR Motard, HONDA CT125 Hunter Cub, HONDA Monkey 125
Lightweight and just right for groms.
It is tiny and ExactlySize for groms.
I just put Swing Arm on it, but it is stable.
(Caution!)
Normal rear fender will cut your finger on the License Plate if you are not a little careful.
I will try Fender Eliminator one of these days.
View detail
Fits: HONDA MONKEY, HONDA GROM, HONDA MSX, HONDA APE, HONDA dachshund, HONDA Shirley., HONDA XR Motard, HONDA CT125 Hunter Cub, HONDA Monkey 125
For RearMaintenance & Motorcycle Storage
Used on a Grom JC92, absolutely necessary for RearMaintenance.
I am satisfied with the low price and the make of the product.
View detail
Recommended
The product is very cheap compared to other companies' products, and it is easy to install because of its quality, strength, and because it fits the vehicle EXACTLY. I was worried because the color was red, but when I installed it, it did not look out of place and I liked it very much. View detail
Cheaper than other companies' products.
It was easy to install, and most importantly, it is inexpensive. View detail
Fits: HONDA Cross Cub 50, HONDA Super Cub 50, HONDA Super Cub 110, HONDA cross-cub 110
Good value and easy to try
This product looks just like a certain Manufacturer's. I haven't compared them, so it's just my opinion. I didn't compare them, so it's just my opinion, but this one is half the price and probably the texture is the same. So, it is a good value.
The installation was a little off in dimension, but if you pull it by force, the installation went easily.
With NORMAL Suspension, there is a gap, but if you are changing to an external one, the gap may be very narrow.
I forcibly pulled it outward by force after installation to create a gap.
It is a little smaller than the Side bag, which is the Minus1Point of use. Other than that, I am generally satisfied.
View detail
Stress has been resolved.
We store our motorcycles on steps, and with the narrow Slope, we had to carefully put them in and out, worrying that they might break off.
In this respect, the Slope is 70 cm wide, so it offers a different sense of security.
I was not sure about the 90 cm length, but I was right to choose 122 cm.
It is foldable, easy to carry with handles, non-slip, and very carefully constructed.
I don't know how durable it is yet, but it seems sturdy.
View detail
Fits: HONDA MONKEY, HONDA APE, HONDA CT125CT110 HUNTER CUB, HONDA XRMOTARD, HONDA CHALY, HONDA DAX
Rear Maintenance Stand NORMAL
Rear Maintenance Stand NORMAL
I could not use it on my Grom JC92. The description reads like it would be compatible with NORMAL, though.
View detail
Side Back, fun to choose!
Among the various exterior parts I installed on the CT125
It was the easiest to install.
Customization is not an easy task for beginners.
The work took about 15 minutes.
The quality of the product was high for the price.
I'm looking forward to choosing a side back.
View detail
Bag support that can be attached to the helmet holder
Some hang is required to remove and install the parts, but the work itself is easy to install as it only requires the removal of a few bolts.
When removing the rubber part of the air cleaner, it is recommended to install it in a warm place because it becomes hard and large when the temperature is low.
It does not interfere with the Helmet holder that attaches to the bottom of the CarrierLeft of DAYTONA, so it can be attached together.
View detail
It is the best cospa
It's a great costumer!
It's not cheap, the paint is solid, and the fittings are fine!
It is easy to install.Recommendation!
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA MONKEY, HONDA DAX, HONDA MSX, HONDA XRMOTARD, HONDA CHALY, HONDA APE, HONDA CT125CT110 HUNTER CUB
Perfect for the MONKEY125!
It is essential for maintenance. I'm glad it's cheap. Durability is unknown. View detail
Cost-effective and solidly made.
It is almost half the price of other companies' products, but it is solidly built and the quality of the paint, welding, etc. seemed perfect. I highly recommend it.
Installation is not difficult as long as you can remove the air cleaner duct and tighten the two bolts together.
It may be only my unit, but the bolt on the tail lamp side is very hard and it was very difficult to use Hexagonal Wrench.
View detail
Cheap, so I'm a little nervous.
I've been using it for almost 3 years with no problems at all.
However, I use it for human use, not for Motorcycle.
I use something a little more expensive from another company for my motorcycle.
This Ladder is still Aluminum Ground.
The lowest price, at least that I've found, but it's neat, no problem.
View detail
Cospa best
The price is about half the price of other companies' products. I don't know the quality of other companies' products, but I am satisfied with the quality of this product. View detail
Safe and easy loading in the cargo bed
I used to use a thick wooden board for Motocross practice, but after hard practice, it was quite hard to load. It's foldable, so it's not too bulky to load in the car, and it's very easy to use. I'm not sure how durable it is yet, but I'm sure it will last a long time since the Trail bike and Motocrosser are light in weight. View detail