Reviews
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
I purchased the Motorcycle Cover because it was out of date.
The handling is very easy and the double structure is very good for a Full Cowl Motorcycle Cover.
Also, GSX1300R HAYABUSA (Type 2) I was able to install the Cover with the GIVI Top Case Bracket still in place.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
DAYTONAChain beware!
Chain hole is too small to fit Daytona's Chain. View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
sv650 is 2L
I bought a L because the fit guarantee said L, but when I put it on, it was BitchBitch's tight-fitting.
It took a while but they accepted the return and repurchased the 2L.
Easy to detach and attach.
Rain does not soak through.
It certainly does not dissolve when attached immediately after an Engine stop.
Good
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX, HONDA 400X
Ease of use is the best
Can be used immediately after returning from touring.
Easy to install and remove
I was looking for a product that satisfied the above two points and found one that looked just right, so I popped it in.
From the results, I'm really glad I bought it.
It is very easy to put on and take off, the cloth is firm, and I am very satisfied. It is a bit pricey, but if you think you can use it for a long time without Stress, it is rather cheap…?
I bought it when I bought a new Motorcycle, but I wish I had bought it sooner.
View detail
Two layers are recommended.
Cover is 2L Size, body is XSR900 (RN56J) The parking lot is used for open-air parking.
When I bought a new car, the dealer gave it to me as a purchase bonus and I was using it, but I had been using it without tightening the String at the hem, and there was a hole where the footpeg hits, probably from the wind, about the second year of use.
I bought the same product because I was not sure about the Size feel of the other company's product, as the dirt that clearly shows the Cap part of the Tank on the Others was floating around and I thought the open hole would widen if I continued to use the product.
However, the first Cover was still usable, so we decided to use two pieces with the new one inside.
As a result, two layers are good. The old outer cover is getting a large amount whiter in the front blue area due to sun damage, but the inside is still as blue as new and the fabric is still soft.
As a Motorcycle Cover, it is convenient that there is a part to put a Wire lock and a Chain lock through the front and rear Wheels. There is not just a hole, but a notch, so it is easy to put the locks through.
Size feeling is that if you don't squeeze the String at the hem, you can't get the size you want, especially Quantity.:Pair (for Left and Right) It may be good for those who want to cover it completely as the hem is just hanging on the ground with excess hem on the sides.
Instead, I don't think moisture will escape, so if you are concerned about moisture, I think the F Type with Ventilation would be better.
View detail
Size was not suitable for CBR1000RR-R.
[How is it used?
It is used in a covered outdoor parking lot.
I am using it on a CBR1000RR-R, which is listed as a compatible model, but the size is too large.
I think it is also due to the fact that I am using Mirror in a folded state, but the excess part of the Cover contacts the ground quite a bit.
Due to the nature of the product, many people will use it outdoors, but the Cover will stick to the ground when it rains.
[Points to note]
If you are thinking of using it on CBR1000RR-R, we recommend you to buy 1Size or 2SizeSmallest one.
View detail
High quality and very pleasant to use.
I was using a 4 year old Motorcycle Cover (about 5,000 yen at Home center), but it started to become brittle after about the 3rd year, and when I took it on and off, I could not get it off. Paste Tape when you run out." However, it has finally deteriorated to the point that even when gently attached, it will break off along the fibers.
The last one was so full of taping that I couldn't tell if it was a cover or a tape.
Motorcycle is stored under a carport so it wasn't in direct sunlight or exposed to rain, but I guess that's the life of the Cover.
When I took the new Cover out of the box, it was the same Silver as the previous Cover, but I felt a thicker and shinier Bird feeling (Well feeling, not crumbly). 。 Durability looks promising.
Size is 2L. And it is just the right size, not too large and not too small.
The Wire lock holes are also set in the front and back, and there is a cord that can be used to squeeze the hem with One-touch for ease of use.
View detail
Tour NSR
I installed it on my NSR as a DIY project.
We used it for 4 nights and 5 days touring from Kanagawa to Lake Biwa.
Unlike TouringBack, Large worked well in the rain!
View detail
Fits: SUZUKI volti, KAWASAKI ZXR250R, KAWASAKI Z400FX, KAWASAKI ZXR-II, KAWASAKI GPz400S, KAWASAKI GPz400R, KAWASAKI EX-4, KAWASAKI GPz250, KAWASAKI 250TR, HONDA Rebel , HONDA Hornet 600, HONDA Bross 2, HONDA Bross 1, HONDA Zervis., HONDA Jade Nighthawk., HONDA videotape recorder, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250R, HONDA GB250 Clubman
Cheap and good stuff!
I chose this product to purchase a Motorcycle Cover for my GB250 CLUBMAN. When I put the cover on, I tend to lose track of the front and rear, but this product has a blue handlebar part, so I can see the front and rear at a glance. Although it is inexpensive, it has a center buckle and a keyhole, so I think it will work well even outdoors. View detail
Fits: YAMAHA FZ1, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, HONDA CB1300 SF, HONDA CB400SF, HONDA CRF250L, HONDA CRF250M, HONDA MAGNA(V-TWIN MAGNA), HONDA X4, KAWASAKI D Tracker, KAWASAKI KDX125/SR, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI SUPER SHERPA, KAWASAKI ZEPHYRX, KTM 690DUKE, KTM 690DUKE R, KTM 990SUPER DUKE, KTM 990SUPER DUKE R
Always replace the usual
After about two years, the same areas will start to tear due to age and deterioration. This area is usually subjected to force and is prone to wear due to wind and other factors. I hope the fabric is reinforced. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA FZ-6, YAMAHA FZ-1, YAMAHA DS250, SUZUKI GLADIUS650400, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI RF400, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, SUZUKI GSF750, SUZUKI GSF1200, KAWASAKI ZZ-R600, KAWASAKI ZZ-R400, KAWASAKI ZX-10R, KAWASAKI Z1000, KAWASAKI W650, KAWASAKI Ninja400R
LSize for Dio110NORMAL, 3L with WindowShield
At first I used LSize to cover it completely, but then I used Windshield.
When I put it on, the size was too small for a L, so I changed it to a 3L.
The bottom part has a string, so you can tie this string to the appropriate place on your motorcycle.
It would also reduce the risk of being blown away by the wind.
The price is reasonable, so it's up to ???? to see if it will last. The price is the same as the price of the product.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
It was EXACTLY what I expected.
The Motorcycle storage area has a roof, but it is inevitably blown in from the side, so we replaced it with a new one,
The product description indicated that it was not suitable for cars with boxes, so I was prepared to remove the box before applying the cover, but when I tried it, the size was sufficient without feeling too tight.
The fastener is located in the right place, so it is easy to hang the cover and change the large size. When not in use, it can be stored by hanging it on the Hook, so there is no need to worry about it getting dirty from contact with the ground, which also makes it much easier. It may be a trivial matter, but I think I will be able to feel much better if I can save labor on these troublesome things.
The fabric felt a little thin, but on the other hand, I felt it was easy to handle without feeling stiff.
Motorcycle is Z900RS CAFE with SHAD23 side case. Please refer to the following images for reference.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
Does not melt properly
I have not used it that many times yet, but I put it on right after I finish a run and it doesn't melt.
Use is also quite easy thanks to Rear's Fastener.
The price is also on the cheaper side of Body cover, so I am satisfied.
I am concerned that it is a little thin, but …….
Now I'm hoping for durability.
View detail
Fits: KAWASAKI W400, HONDA CB1300SB SP, HONDA X-4, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA CB1100, HONDA CB1100 EX , HONDA CB1100 EX E Package, HONDA X11, HONDA X11, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000
Price is reasonable. Heat resistant pad comes in a single piece.
Car models used:TRX850 Size:3L
I have been using Y's Gear Motorcycle Covers with Repeat for almost 20 years, but was attracted to the low price and decided to give it a try.
In conclusion, I should have chosen Y's Gear even if it was expensive. The material texture is cheap, but it looks reasonable from a distance because it is black. It is a pity because I would like to put it on the back. The heat resistant pad is only one piece and does not fit my car which has two Exhaust System. I looked at the product specs again, but the quantity of the heat resistant pad is not written. However, 3L is a Large type for Vehicle, so the standard is 2 pads, right? Also, they made me choose 3L because of the fitment guarantee, but it's too big. Too bad.
View detail
Fits: KAWASAKI W400, HONDA CB1300SB SP, HONDA X-4, HONDA CB1100, HONDA CB1100 typeI, HONDA CB1100 II, HONDA CB1100 EX, HONDA CB1100 BLACK STYLE, HONDA CB1100, HONDA CB1100 EX , HONDA CB1100 EX E Package, HONDA X11, HONDA X11, HONDA CB1000R, HONDA CB1000SF, HONDA CB1000SF-T2, HONDA CBR1000RR, HONDA CBX1000, HONDA CBX1000, HONDA GL1000
DAYTONA Motorcycle CoverSIMPLE 3L Size
[How is it used?
Currently in use
How was your experience with it?
I bought it because Z1000 was available in 3L size, but it was quite large and when I put it on, it was Oversized.
It came off in a strong wind the other day, but thanks to the included fixing Belt, it did not fly anywhere.
How did it compare to other products?
Cost performance is excellent. If you choose the black color, you can expect a deterrent effect against theft at night.
[Points to note]
I think it is better to buy one size smaller than the fit depending on the type of car.
Also, if the Motorcycle is secured too tightly to prevent it from being blown away by strong winds, the Motorcycle may fall over, so use moderation.
Other items that would be helpful
Included Parts:Yes/No
Belt for fixing car body
Seal to protect the Cover from the heat of the Exhaust System
View detail
Fits: SUZUKI BOULE VARD 400, KAWASAKI ZX-14R, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI XN85TURBO, SUZUKI GS650G, SUZUKI GSX-R750SPR, SUZUKI GSX-R750W, SUZUKI GSX-R750R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX750RR, SUZUKI GSX750R, DUCATI M1200 STRIPES, DUCATI M1200 S
Black cover
The Cover I was using was getting old, so I was looking for a new one, and I bought this one because the ratings were not bad and the price was not that high.
Black looks good. Functionally, it is normal and usable.
The Seat that comes with the product is attached to a place near the Exhaust System where it comes in contact with the Exhaust System. I wonder what it is….
How many years will it last durably?
We will use it and see how it goes.
View detail
Fits: SUZUKI KATANA, HONDA VTR1000F, HONDA VT400S, HONDA VT750S, HONDA DN-01, HONDA Integra, HONDA FUSION, HONDA Silver wingGT400, HONDA Silver wingGT600, HONDA CBR 650R, HONDA CBR 1000RR, HONDA CB 650R, HONDA CB 1000R, HONDA CB1300 SUPER FOUR, HONDA CB1300 SUPER BOLD'OR, HONDA NC750X, HONDA NT1100, HONDA VFR800X, HONDA VRX Roadster, HONDA FORESIGHTEX
There is no lie in my name.
How easy it is to write is shown in the product description, and my impression is that I have actually used it. By far the easiest to put on compared to a regular Motorcycle Cover."
It has holes in the front and rear for keys, thick fabric, and heat-resistant fabric on the silencer part.
If we were to seek even greater satisfaction, it would be in the form of improved waterproof performance and a lining that does not damage the vehicle body, but we also like the sense of balance of keeping the price at around 10,000 yen, which is affordable for many users without seeking perfection to that extent.
The disadvantage is that the crosswind enters GunGun from Center because there is no cord to hem only front and back.
If you try to tie the MotorcycleCenter to prevent flapping, this Cover lowers gently from front to back (see the picture in the product description), so the top of the MotorcycleCenter is hollow (good for preventing scratches from rubbing against the tank, but increases the risk of tipping over in windy conditions). (This is good for preventing scratches from rubbing on the tank, but increases the risk of tipping over in windy conditions)
The size of the GSX-S1000GT is a little large if the Pannier is not installed, and a little tight in the back if the Pannier is installed.
View detail