Reviews
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Fits: YAMAHA BRONCO, GASGAS PAMPERA250125, YAMAHA XG250 TRICKER, YAMAHA SEROW225 W, YAMAHA SEROW225 WE, YAMAHA SEROW225, YAMAHA XT250X, YAMAHA XTZ125E, YAMAHA TW225E, YAMAHA TW200, YAMAHA TW200E, YAMAHA TT-R125LW, YAMAHA DT50, SUZUKI GRASS TRACKER, KAWASAKI KLX125, HONDA XR50 MOTARD, HONDA XR230, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA TLM220R
ExactlyFit
It is nice to have a Belt that can be fixed to the Center.
It is also very good that the front wheel side can be squeezed.
View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
Fits: SUZUKI K50, SUZUKI K80, SUZUKI Birdie90, HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie80, HONDA BENLY PRO, YAMAHA Axis Treat, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA YSR50, YAMAHA VOX, YAMAHA YB50, YAMAHA V80MATE80, YAMAHA V80MATE50, YAMAHA TZ80, YAMAHA TDR80, YAMAHA TZ50, YAMAHA TDR50, YAMAHA FZ50
I wanted a camouflage Motorcycle Cover.
[How is it used?
Used for KSR-II.
It is kept in Garage, but the reality is that it is not a fashionable thing called Garage. Garage and workshop. It is reasonable to say that dust and dirt are falling on motorcycles that have not been ridden for a while....
I purchased the Motorcycle Cover to improve the current situation where the first thing I do when I start to ride my motorcycle, which is supposed to be kept indoors, is to wash it.
Did you receive the item as per the Image?
I have purchased 3L/4L Size and L Size of this product in the past, and they have been used on SV650, SEROW, LITTLE CUB, etc., respectively, and have been very useful. I usually buy 1~2Size Large size body cover, but this time, I bought a 3L/4L Size and L Size body cover, which are listed on the back side of the box. Size appropriate for KSR-II." I purchased the M Size which is
I personally like camouflage patterns, so I searched all over Webike for this product and chose it.
How did you like it?
The reason why I had purchased the Large size is that I had been using it for a vehicle with a Rear box and a front basket. Bare bones. I purchased the M Size as specified for the proper size because it is used for a vehicle with a
when covered with Just fit." I will probably buy the M size again next time because I don't plan to do any more customization or rear box installation, etc. on this vehicle.
As I mentioned above, I use it for vehicles stored in Garage, but the fabric is thin, so I feel that the durability and weather resistance are a bit stiff if the vehicle is stored in the sun, such as on a bicycle parking lot.
[Points to note]
It is a thin fabric, labeled 100% Polyester, so you may want to consider replacing it after around one year if used outdoors.
Also, when the Engine or Exhaust System is hot, it is stated that it should be used only after the system has cooled down sufficiently.
How did it compare to other products?
Camouflage-colored body covers used to be sold by several companies, but recently they have become scarce, perhaps due to lack of demand.
Among them, Mr. Uniker has Green Light camouflage and Color:I can only be thankful that they have S Size to 8L for each of the two color variations of Gray camouflage.
Other items that would be helpful
Point and hang of installation
Not for use on vehicles at high temperatures.
Since the Motorcycle Cover is not strongly appealing to durability and weather resistance for its price, it may last a little longer if it is stored indoors or in the shade when not in use to avoid unnecessary ultraviolet rays.
similar to the above Heat resistant, durable, weather resistant If you are looking for a more expensive Body cover, consider a more expensive Body cover.
[ITEMS TO BUY TOGETHER
If theft prevention is also a consideration, purchase a strong Motorcycle locketc. to enhance theft protection.
[Opinions and requests to Manufacturer
We would be very grateful for two different color variations, but we would also appreciate it if you could add sand camouflage pattern, marine camouflage pattern, etc. to the lineup to make the garage even more colorful.
View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
Smartphone fixed
Power supply and phone are easier to attach than Handlebar. View detail
If you have trouble choosing a Motorcycle Cover, buy this one!
I bought this for storage of my Honda Grom that I always use to commute to work.
The motorcycles in my house are basically using DAYTONA's Black cover.
After buying various Motorcycle Covers for a long time and making many mistakes, I feel like I have finally arrived at one answer.
Until long ago, I used to buy motorcycle covers because they were just cloth and they were all the same, so I just went with the cheap ones, but the cheap ones were thin and deteriorated quickly over time, so I had to avoid them the moment they got caught on the car body, and for a long time I found myself unable to use the large ones in a short time. I had been keeping it for a long time. It was rare for them to last a year, and the large ones often ripped after a few months.
In this situation, we tried DAYTONA's Black cover. Although it deteriorates over time, it has lasted more than two years compared to the low-priced products of other companies, and the fabric is somewhat durable and does not avoid easily.
The Black cover is a safe and long-lasting product.
However, I gave it 4 stars because I frankly think it is expensive for a mere fabric.
Since you don't want to waste time choosing a Motorcycle Cover, just go with the Black cover.
View detail
Fits: HONDA Benry 50S, HONDA CB125, TRIUMPH SPRINT ST, HONDA ZOOMER(Ruckus), APRILIA SR125 (APRILIA), APRILIA SR 50, HONDA BENRY CD50, HONDA CD70 (Benly), HONDA Benly CD90, HONDA Hunter Cub CT110, HONDA EV-Neo, HONDA GROM, HONDA Dio (4-stroke), HONDA Via., HONDA broadcloth, HONDA Lead 110 (EX), HONDA Lead 50, KAWASAKI AR50/S, KAWASAKI Z125 Pro, KTM 1190 RC8
For SUPER CUB
I had been using a Cover that I had purchased at Home center, but it was torn, so I decided to go with the fireproof Type anyway.
I have retrofitted the CUB with a Front Shield and it just fits without any problems.
The rest is expected to be durable
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
Mounted on PCX125 (8bj)
I bought this for my PCX125 (8bj) to install a Smartphone Holder and a USB charging port, but I didn't want to put a Wound on the Handlebar and I wanted to mount my phone as far forward as possible. PostClamp type. I had installed the Plating type on my W650 a long time ago, but after using it for many years, the rust would inevitably appear, so I chose the Black color with the expectation that it would be less noticeable.
Looks fine. Easy to install.
View detail
Fits: HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie90, SUZUKI Birdie80, SUZUKI K80, SUZUKI K50, YAMAHA MATE NEWS80, YAMAHA BWS, YAMAHA MATE NEWS 50, YAMAHA TOWN MATE80, YAMAHA CHAMP CX, YAMAHA JOG POCHEtt, YAMAHA MATE, YAMAHA GEAR C, YAMAHA AXIS 90, YAMAHA Axis Treat, YAMAHA YSR50, YAMAHA YSR80, YAMAHA VOX, YAMAHA YB50
It's solid.
It repels water well and functions as a cover well enough. View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
It is said that the size is just right for a grom. If you don`t put a top case on it
I bought the M Size after reading the impressions that it was just right for the Grom, but I had forgotten about the Top case.
It is not impossible to use it, but I regret that I should have chosen a Large size.
I think the quality is good
View detail
Fits: Others Universal, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA BENLY50, HONDA BENLY50110, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEADEX, HONDA APE 50, HONDA APE 100, HONDA DIOCesta, HONDA XR50 MOTARD, HONDA XR100MOTARD
enough
The Motorcycle Cover I was using before was torn, so I bought a new one.
Since it is a Small Motorcycle, it is still a little large, but it is sufficient.
It has an aperture and is Buckle so it is easy to stop.
I often lose track of the front and back of the Motorcycle Cover, but this product seems to be easy to recognize because of the Red markings on the front.
Motorcycle Cover is PinDrill, so I think this price range is sufficient.
View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
Large satisfied
It is quite solidly made and I am satisfied with Large!
Just size for Z125PRO as well.
Heat Insulating Material that can be affixed to the Exhaust System portion and
Don't let it flap in the wind.
I also like that it comes with a Belt!
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Mounted on ADV160
I put it on my ADV160 to attach ActionCamera.
I chose the Mirror mount to avoid the screen. I have used it on other cars and think it is the most universal.
Both quality and texture are perfect considering the price.
View detail
Fits: HONDA VTR250, YAMAHA MT03, HONDA Forza300, HONDA CB500X, HONDA CB500F, HONDA CB150R, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-09, SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI DL1000 V-STROM250, HONDA HORNET250, HONDA FORZA Si, HONDA FORZA Si, HONDA JADE, HONDA glom, HONDA CROSSCUB110, HONDA APE 50, HONDA XR100MOTARD
well done
I don't have enough space on my bike handlebars.
I needed a bracket to fix the phone holder and a place to mount the Insta360,
This product solved it once and for all.
Daytona products never disappoint
Installation takes about 5 minutes. Quality is also lacking. -------------------------------------------------- -------- Because there is no right place in the bike handle I needed a bracket to fix the cell phone cradle and a place to mount the Instagram 360, This product has been solved at once. Daytona products are not always disappointed Installation is enough for 5 minutes. Quality is also lacking. Powered by Google Translator
View detail
Fits: YAMAHA Cygnus X, KAWASAKI AR50/S, YAMAHA NMAX155, HONDA LEAD125, YAMAHA CYGNUS X, YAMAHA GEAR, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA Axis Treat, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA RZ50, YAMAHA NMAX, YAMAHA BWS125(BWS), YAMAHA BWS100(BWS), YAMAHA BWS(BWS), Vespa PX 200E, Vespa LX200
I should have bought it earlier.
I have always parked my MONKEY in the corner of my carport, but since it is half-roofed, it does not get wet unless it is raining and windy, and I thought I could do without the Cover because it is troublesome, but I bought it because I could not stand the yellow sand, pollen, and the ime−ji that is increasing year by year. I bought it because I couldn't stand the guerrilla downpour that was increasing every year. I thought it would be a hassle to take them on and off, but it's not at all difficult, and above all, they are visibly more beautiful and last longer. I wish I had bought them earlier. View detail
Fits: YAMAHA Cygnus X, KAWASAKI AR50/S, YAMAHA NMAX155, HONDA LEAD125, YAMAHA CYGNUS X, YAMAHA GEAR, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA Axis Treat, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA RZ50, YAMAHA NMAX, YAMAHA BWS125(BWS), YAMAHA BWS100(BWS), YAMAHA BWS(BWS), Vespa PX 200E, Vespa LX200
I should have bought it earlier.
Since I ride relatively often, I thought it would be a hassle to attach and detach the Cover every time. However, the parking lot at home is not a complete garage, but a carport with a roof, which can withstand a small rain, but it cannot escape a direct hit from strong wind and rain, pollen, yellow sand, and so on. Even if I wash and polish the car, it gets dirty soon, and it has been two and a half years since I noticed it.
This winter was very cold and I needed to wash my car with a lot of energy. Against this background, I decided to purchase this Cover.
In my case, I left the top case on my MONKEY125, so it is a M size top case compatible type, but it was the perfect size. It is very easy to put on and off, and it takes less than a minute. And of course, it was free from dirt, which I was expecting most.
View detail
Fits: YAMAHA Cygnus X, KAWASAKI AR50/S, YAMAHA NMAX155, HONDA LEAD125, YAMAHA CYGNUS X, YAMAHA GEAR, YAMAHA NMAX, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA Axis Treat, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA RZ50, YAMAHA NMAX, YAMAHA BWS125(BWS), YAMAHA BWS100(BWS), YAMAHA BWS(BWS), Vespa PX 200E, Vespa LX200
It is well made
I purchased this for my NMAX.
I have a Long Screen on, so a L size would have been fine.
Still, it is good that the front and rear Tire still manage to take.
I can't say anything about the quality of the product since this is my first purchase of a Motorcycle Cover, but I think it is a passable product.
View detail