Reviews
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
Fits: HONDA Trenzalube 400V, HONDA XR400 Motard, HONDA XR250, HONDA XR250 Motard, HONDA XR230, HONDA XL Degree, HONDA XLR250R, HONDA XLR250BAJA, HONDA XL230, HONDA TLM220R, HONDA TL125, HONDA SL230, HONDA NC700X, HONDA FTR, DUCATI Multistrada 1200S, HONDA AX-1, HONDA CR125R, HONDA CR250R, HONDA CRM250R, CAGIVA Super City WB
It's nice and solid!
The fabric is thicker and more solid than I expected.
It will not tear even if it is caught on a slightly sharp part such as a number and pulled.
The buckle is attached in the middle of the cover, just below the engine, so it doesn't flap around or fly away even on windy days. (The Motorcycle Cover I used to use didn't have a buckle so it used to fly away...)
The holes in the front and rear are designed to allow for the passage of anti-theft chain locks, etc., so that security is also taken into consideration. The holes are relatively large, but a certain motorcycle shop Baron Red." If you want to use the lock that you get when you take delivery of your car, you will need to put the lock in at an angle. It is a bit of a hassle, but don't worry, you can use it!
I put on the Cover as soon as I get back from touring, and it is very useful because it doesn't seem to melt even though it hits the Exhaust System.
I have only been using it for a month and have not had any Large problems. I am looking forward to seeing how durable it will be.
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
Durable Motorcycle Cover
[How is it used?
I had to replace my old Cover because it was getting old.
Was the one you received as per Image?
It was no different from the image.
How was your experience with it?
The holes in the chain lock are easy to thread and the fabric seems durable.
It also seems to repel water easily.
[Points to note]
Not particularly
How did it compare to other products?
A cheaper one, I think about half the price, would tear sooner than this.
View detail
Fits: BMW CS Scorver, BMW F650, BMW F650GS Dakar, CAGIVA elephant, CAGIVA super city, CAGIVA Super City WB, DUCATI Hypermotard 1100EVO, DUCATI Hypermotard 1100EVO SP, DUCATI Hypermotard 796, DUCATI Multistrada 1200, DUCATI Multistrada 1200S, HONDA AX-1, HONDA CR125R, HONDA CR250R, HONDA CRM250R, HONDA FTR, HONDA NC700X, HONDA SL230, HONDA TL125, HONDA TLM220R
Use for approx. 1 year
[How is it used?
Blue empty parking.
Was the one you received as per Image?
If you choose according to the compatibility chart, it seems a little small.
Was the installation difficult?
There was no particular hassle.
[Included Parts:were they on?
Like there was a storage bag.
[Was there anything that disappointed you?
It was a little Smallish and this is how it ripped in one year.
View detail
Fits: SUZUKI Jebel 200, SUZUKI Jebel 250, SUZUKI Jebel 125, SUZUKI TS200R, SUZUKI SX200R, SUZUKI TS125R, SUZUKI SX125R, SUZUKI RM80, SUZUKI RM125, SUZUKI RM250, SUZUKI DR250SH, SUZUKI DR-Z400, SUZUKI DR250S, SUZUKI DL650, KTM Enduro 350EXC, SUZUKI DL1000, KTM 600EGS, KTM 300, KTM 400, KTM 250
Size table is reliable.
Medium Thick Material.
No tears or fading, of course, after one month of use.
A little more water repellency would be nice!
View detail
Fits: SUZUKI Jebel 200, SUZUKI Jebel 250, SUZUKI Jebel 125, SUZUKI TS200R, SUZUKI SX200R, SUZUKI TS125R, SUZUKI SX125R, SUZUKI RM80, SUZUKI RM125, SUZUKI RM250, SUZUKI DR250SH, SUZUKI DR-Z400, SUZUKI DR250S, SUZUKI DL650, KTM Enduro 350EXC, SUZUKI DL1000, KTM 600EGS, KTM 300, KTM 400, KTM 250
Just size, good thickness!
Purchased camouflage color for off-road motorcycle.
Medium thickness Material, Size perfect.
View detail
Fits: YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA ARTESIA, YAMAHA WR250X, YAMAHA WR250R, YAMAHA TT250R, YAMAHA TDR250, YAMAHA DT850, YAMAHA DT125R, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250, SUZUKI DF200 DJEBEL, SUZUKI DF125 DJEBEL, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SX200R, SUZUKI SX125R, SUZUKI RM80, SUZUKI RM250, SUZUKI RM125
It won't dissolve.
The fabric of the Cover is thin and light, but
The heat from the exhaust system did not melt the body cover immediately after stopping the Motorcycle.
It is lightweight, easy to put on and has a Belt to prevent wind-skipping.
View detail
Fits: HONDA Trenzalube 400V, KAWASAKI 250TR, HONDA XR400 Motard, HONDA XR250 Motard, HONDA XR230, HONDA XR250, HONDA XLR250R, HONDA XL Degree, HONDA XL230, HONDA XLR250BAJA, HONDA TLM220R, HONDA SL230, HONDA TL125, HONDA NC700X, HONDA CRM250R, HONDA FTR, HONDA CR250R, HONDA CR125R, HONDA AX-1, DUCATI Multistrada 1200S
Might be just the thing.
Buy 4L.
CRF250RALLY (MD44) The hem is a little short when you put it over the top, but considering the ventilation, it might be just right.
The fabric is more solid than I expected.
View detail
Fits: HONDA Trenzalube 400V, KAWASAKI 250TR, HONDA XR400 Motard, HONDA XR250 Motard, HONDA XR230, HONDA XR250, HONDA XLR250R, HONDA XL Degree, HONDA XL230, HONDA XLR250BAJA, HONDA TLM220R, HONDA SL230, HONDA TL125, HONDA NC700X, HONDA CRM250R, HONDA FTR, HONDA CR250R, HONDA CR125R, HONDA AX-1, DUCATI Multistrada 1200S
Second purchase
I bought it again because the wind blew it away while I was drying it…
It did not deteriorate at all after six months of use.
Buy Repeat.
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
Size
Used for SEROW250.
It's just the right size.
It has a good texture and is very durable.
As for durability, how long do you think it will last?
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
The fabric is strong and will last a long time.
[How is it used?
Used to store my Motorcycle at home.
I chose the one made by DAYTONA which is strong against rain because it is stored outside.
Was the one you received as per Image?
Size and color are as Image.
How was your experience with it?
The fabric is a little thicker and sturdier than I'd like.
It is difficult to wear at night because it is Black, but the size feeling is Exactly.
It is Large strange to stop Velcro.
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
Black Parenthesis Good
The rear blinker of HUSQVARNA was broken, so I chose it as a replacement part.
Originally, I prefer to have Blinker and other fixtures Refreshing, but this sometimes looks Refreshing and I am satisfied with it.
It works without any problems, and the installation was simple and easy.
View detail
Fits: YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA ARTESIA, YAMAHA WR250X, YAMAHA WR250R, YAMAHA TT250R, YAMAHA TDR250, YAMAHA DT850, YAMAHA DT125R, SUZUKI DJEBEL250 XC, SUZUKI DJEBEL250, SUZUKI DF200 DJEBEL, SUZUKI DF125 DJEBEL, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SX200R, SUZUKI SX125R, SUZUKI RM80, SUZUKI RM250, SUZUKI RM125
thin and light
Even though the fabric of the cover is thin and light, it will not melt from the heat of the exhaust system even if you put the body cover on immediately after stopping the motorcycle. The cover is light and easy to put on and has a windproof with belt. View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
Reasonable thickness and water resistance and durability are expected
I replaced my Daytona BlackMotorcycle Cover that I had been using for several years because it was ripping.
The fabric feels reasonably thick and solid to the touch.
It hasn't rained since I've used it yet, so I don't know how water resistant it is yet, but from the texture, it looks promising.
Similarly, I expect it to be durable.
View detail
Fits: HONDA CR125R, HONDA CRF150RII, HONDA CRF150R, HONDA XLR200R, HONDA MTX200RII, HONDA XR230, HONDA FTR223D, HONDA FTR, HONDA SL230, HONDA XR250R, HONDA XR250 BAJA, HONDA XR250 MOTARD, HONDA XR250, HONDA XLR250R, HONDA XLR250RH, HONDA XLR250RF, HONDA FTR250, HONDA CRM250AR, HONDA CRM250, HONDA CRM250
I use it to store my motorcycle.
I have been using the Motorcycle Cover for my outdoor storage and was looking for a sturdy fabric that would tear at the slightest snag and make it useless. I hope it will last a long time. View detail
Fits: YAMAHA YZ125 X 14.5 mm, YAMAHA YZ125 14.5mm, YAMAHA WR250 X 14.5 mm, YAMAHA WR250 R 14.5 mm, YAMAHA DT200 WR 11mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, KAWASAKI KLX250 R 11mm, KAWASAKI KDX250 11mm, KAWASAKI KDX200 11mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ450 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 99-16 14.5mm
A little heavy but sturdy and Compact
The body of the car doesn't have much of a slope when using the STAND, so you need to think about where to stop it or it will fall over
I don't blame you, though, because the angle will put a strain on the Swing Arm LINK
View detail
Fits: YAMAHA YZ125 X 14.5 mm, YAMAHA YZ125 14.5mm, YAMAHA WR250 X 14.5 mm, YAMAHA WR250 R 14.5 mm, YAMAHA DT200 WR 11mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, KAWASAKI KLX250 R 11mm, KAWASAKI KDX250 11mm, KAWASAKI KDX200 11mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ450 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 99-16 14.5mm
Strong strength
I used Triangle type STAND so far but I changed this type to T type.
Usually it will be broken if you try KICK with STAND attached
There was strength and durability enough to withstand KICK with STAND on,
Also, unlike Triangle it is Compact so people who are free running are better recommended.
View detail
Fits: YAMAHA YZ125 X 14.5 mm, YAMAHA YZ125 14.5mm, YAMAHA WR250 X 14.5 mm, YAMAHA WR250 R 14.5 mm, YAMAHA DT200 WR 11mm, SUZUKI DRZ400 SM 11mm, SUZUKI DRZ400 S 11mm, KAWASAKI KX250F 18mm, KAWASAKI KLX250 R 11mm, KAWASAKI KDX250 11mm, KAWASAKI KDX200 11mm, HONDA CRF250 R 18mm, HONDA CR125 R 18mm, YAMAHA YZ450 F 99-08 14.5mm, YAMAHA YZ450 F 09-16 18mm, YAMAHA YZ400 F 99-08 14.5mm, YAMAHA YZ250 X 99-16 14.5mm, YAMAHA YZ250 F 09-16 18mm, YAMAHA YZ250 F 01-08 14.5mm, YAMAHA YZ250 99-16 14.5mm
Very easy to use Compact retrofit STAND
The Side Stand installation Bolt of KDX 200 SR became stupid and it got to fall off during running.
When I looked for something in place, I found this product, purchased.
【What made you decide the purchase?】
It was inexpensive in the carrying STAND, it seemed to be more convenient to carry with Compact than Triangle stand.
【How was it actually used?】
It is easy to install just inserting into Rear axle.
You can use it even on gravel or slightly soft soil.
【Was it difficult to install? (Hard parts case)】
Just plug it into Rear axle, but it seems likely to beat Motorcycle when it crouchs trying to plug in unfamiliar.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Be careful as it may collapse when used on a sloping ground.
During Touring I am hanging between Handlebar and Hand guard.
It is caught that the shape of the letter T is good, it will not fall unexpectedly.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
I hope we are a bit cheaper.
【Have you compared items?】
DRC : Triangle stand
I found this first, but I bought it off because it is a difficult shape to carry for Touring.
[Others]
When I could not turn on the OEM SIDES tunt I was seriously impressed with welding and replacing it, replacing it with Swingarm, but it was okay to solve it somehow.
Trouble that does not anticipate old motorcycle occurs frequently, but it is also fun.
* Can you recommend this product to friends and acquaintances? ⇒ YES! Recommendation is possible.
View detail