Reviews
Blue empty parking.
Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty.
View detail
Black still seems to be vulnerable.
Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Generally satisfied, although there are reasons for the low price.
The DAYTONA WaterRegistrant I was using on my 2019 Z1000 is now over 4 years old and falling apart from the quicksand, so I decided to try a different Manufacture next.
The evaluation is based on the comparison with DAYTONA's Cover, but the large size of the Cover can fit in the LLSize Z1000.
The material is a bit flimsy, and it is hard to say how durable it will be until it is used for many years, but I have the impression that the price is appropriate in this area.
The front and rear cover has the same locking holes, but the front wheel hole is much closer to the front, so you have to lock it at the very front.
I think it is good that there is an air hole to release moisture in the Mirror section, which was not available in DAYTONA. When it rains, the humidity inside the Cover unexpectedly rises, and since it cannot escape, the inside gets wet too.
In general, the quality of the product was generally satisfactory for this price with good cost performance, although there were some price-appropriate parts.
View detail
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
CROSSCUB110/Mounted on JA60
CROSSCUB110 (JA60) The product has been installed in the
However, the supplied boltc. is M8 size, so it cannot be installed as it is.
The handlebar mounting bolt on the CROSS CUB is M6 size, so it will fit.
Bolt×2 pieces of M6 - Collar (Spacer) of M6×Quantity:2pc. Set is the minimum requirement. I bought it from Net mail order because it is not sold in Home center around here. I bought the M6 Washer×Quantity:2pc. Set was also used.
☆ Reference
M6 Bolt…M6 x 45mm Bolt With Hexagon Hole/Half-Screw
M6 color (Spacer) …13X6.2X15
M6 Washer is sold at home centers around the area.
It is not impossible to substitute the M6 collar (Spacer) with the M8 collar that comes with the product, but I bought the M6 one because it might be wobbly.
Quantity of the four Bolts at the Center of the Handlebar Mounting section in the front.:Remove and install the 2pc.
As shown in the photo, JA60 has almost no clearance between the Multi Bar and the Meter, so parts to be attached to the center of the Multi Bar may not be suitable or require some ingenuity.
View detail
suitable for gixxer 250
About quality and texture : handlebar material is solid About the feeling of use : solidly supports my handphone and action camera Products to buy together : you will need accessory mounts for your phone or action cameras Difficulty of installation : easy. just remove old bolts and install bolts provided Cost performance and comparison with other products : higher price but worth the good quality About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : this works only on gixxer 250 View detail
Gone.
Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail
I was able to install it on a '22 MT-07 with no problems.
I was able to install it on a '23 MT-07 without any problems, only the HandlebarRight Side is possible.
Since MT-07 is not included in the warranty for this product by DAYTONA, I purchased a longer bar from another manufacturer. However, I was worried that the bar might shake and my phone might fall off when I actually ride the bike, probably because the mirror bracket on the bar is a thin plate.
This product from DAYTONA was comfortable to use because there was almost no rattling or shaking.
I chose the longer bar, but the Quantity:Pair (for Left and Right) It would have been better if it could be slid to "1", or if it was a smartphone 1pc. it would have been better to have a shorter bar.
I thought it would have scored 100 points if the attached color and Bolt color were also Black color.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Unika Kogyo BlackMotorcycle Cover
I was looking for a motorcycle cover for my MT25 Yamaha Motorcycle Cover, which I had been using for many years, but it was torn due to age-related deterioration.
I chose the size L L and wondered if it was too large. I thought it might be too big, but it was JUSTHit.
View detail
Fits: Others Universal, HONDA REBEL250, HONDA REBEL500, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER BOLDOR, HONDA CBR400R, HONDA GB350, HONDA GB350S, HONDA CBR250RR, HONDA CB125R, HONDA CB250R, HONDA ADV150, HONDA CB400SS, HONDA CB400F, HONDA CBR400RR, HONDA CBR250R, HONDA CB223S, HONDA HORNET, HONDA VTR
Enough where there's a roof over your head.
I bought it because it was on Sale.
Slightly thinner than expected, but not completely waterproof type, so it is sufficient under the roof.
Large front and rear locking holes are easy to use.
There is a Strap in the Center that can be closed and used.
Good for people who don't like the visible Type, as it goes all the way up to the Tire.
Nija400 and LL is about as roomy as you can get.
View detail
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
Fits: Others , HONDA CB1300SB, BMW F800, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25
SEROWTour Shell Case 2
Well thought out for ease of use. The sides are Material:The plastic material makes it look like a hard case, which is also a good design, and it is very nice because it is more compact when installed on the car body than a typical soft back. The inside is double-layered. This means that the outer fabric does not come in direct contact with the luggage, and it also has a splash-proof inner back to further protect the luggage. If you use the Rain Cover (sold separately), it will be safe even in the rain.
It is also great that the SIDE opening can be adjusted to open and close at different angles. If it is so good, it would be even better if the Case itself is Completely Waterproof.
View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
Size did not fit….
I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.
I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.
One of my colleagues at work is a motorcycle rider, so I gave it to him for free.
I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Standard Large capacity
Installed on klx230sm.
It is still safe to have a Side stay for installation.
The type opens from the side, so it is good that there is no interference even if the Rear back is mounted on top.
Fixing the system requires some ingenuity depending on the type of car, but I think the only way to do that is to devise a solution for each individual car.
View detail
Smartphone fixed
Power supply and phone are easier to attach than Handlebar. View detail
Two layers are recommended.
Cover is 2L Size, body is XSR900 (RN56J) The parking lot is used for open-air parking.
When I bought a new car, the dealer gave it to me as a purchase bonus and I was using it, but I had been using it without tightening the String at the hem, and there was a hole where the footpeg hits, probably from the wind, about the second year of use.
I bought the same product because I was not sure about the Size feel of the other company's product, as the dirt that clearly shows the Cap part of the Tank on the Others was floating around and I thought the open hole would widen if I continued to use the product.
However, the first Cover was still usable, so we decided to use two pieces with the new one inside.
As a result, two layers are good. The old outer cover is getting a large amount whiter in the front blue area due to sun damage, but the inside is still as blue as new and the fabric is still soft.
As a Motorcycle Cover, it is convenient that there is a part to put a Wire lock and a Chain lock through the front and rear Wheels. There is not just a hole, but a notch, so it is easy to put the locks through.
Size feeling is that if you don't squeeze the String at the hem, you can't get the size you want, especially Quantity.:Pair (for Left and Right) It may be good for those who want to cover it completely as the hem is just hanging on the ground with excess hem on the sides.
Instead, I don't think moisture will escape, so if you are concerned about moisture, I think the F Type with Ventilation would be better.
View detail
Fit like a dedicated Cover!
[How is it used?
Used at home Garage
Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression
How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Large capacity and good shape
It does not gap at all when driving on the highway. It has enough load capacity and looks good. The bag is waterproof and the product is well made and I am satisfied with it. I don't like the side bag to be bent due to my personality, so I mounted it on top of the Bracket, which is the width of the SeatPlusBracket, and in NORMAL mode the Magic tape doesn't reach it. Therefore, the total width is the same as the Large body grip end, so you have to be careful not to slip through. It will be good when it is new, but it will be inevitable that the color will be tarnished by sunlight. View detail