Reviews
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Almost satisfied
I used it on my gsx250r. It is the size of the limit in terms of the large size, so I think it is a little strange to cover it with a large size, but if it is too large, it will rub on the ground and get dirty, so it depends on which side you take. I chose this one because I wanted to use it as a perfect fit, but I am prepared for the fact that it is hard to put on. However, as you can see in the picture, the bottom of the bag is not touching the ground, but only the front side is touching the ground.
Also, the flame retardant Seal to put on the Exhaust System contact area peeled right off, so I threw it away. I don't need it because I don't cover it while it is hot, but it might be MinusPoint for those who are looking for it. I'd be happy if it had stuck to a wider area originally.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX
multifunctional bracket
My motorcycle is YAMAHA NMAX155. I bought this DAYTONA multifunctional handle bracket from webike. It is firmly fixed on the original rearview mirror base. It is fixed with M10 screws. The diameter of the pipe is 22mm, and it can be installed with mobile phone brackets and other accessories. Design Simple and easy to use will not affect riding safety. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. I bought this Daytona multi -function handle stand on Webike. It is fixed on the original rearview mirror seat. It is fixed with the M10 screw. Simple use will not affect cycling safety. Powered by Google Translator View detail
Fits: YAMAHA YZF-R3, YAMAHA NMAX155, YAMAHA MT03, HONDA CB500F, APRILIA RS250, APRILIA RS125, APRILIA RS50, DUCATI 899 Panigale, HONDA CB250 F, HONDA CB400 F, HONDA CB400 SB, HONDA CB400 SF, HONDA CBR125 R, HONDA CBR250 R, HONDA CBR400 R, HONDA CBR500 R, HONDA CBR600 RR, HONDA NSR250 R, HONDA PCX150, HONDA VTR F
As expected
I have used various covers (DAYTONA, Home center, fireproof, etc...). I have used various covers (DAYTONA, Home center, fireproof, etc...).
Although there is a slight difference in the length of time it can be used, even this slightly more expensive product will still tear in front of a Blue Sky parking lot.
Is it a Material issue as the fabric tears, not the sewing. Used for about 2 years.
However, the holes for the locks were easy to identify with different colors in the front and back, and the Belt in the Center was easy to use.
I think this product can be recommended for use in the shade or under a roof.
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Repeat Buy
I bought it about 3 years ago and bought it Repeat because it was color-burned, weathered and torn from continuous abuse in the hot sun.
It is a good size for Aerox with Windshield and although it seems overpriced, I think it is a good product as it has lasted 3 years.
Unfortunately, the same color was not available so I bought the Silver and am using it as an Inner. The outside is still the same as the previous Cover and continues to be a shield against direct sunlight.
The double layer makes it hard to put on Chain, but I expect it to last even longer.
I wanted to add a video, but when I uploaded it to Youtube, it became a short video + the URL of the short video was rejected for posting impressions, so I'm pasting it here. If you are interested, please take a look.
DAYTONAMotorcycle Cover (for Webike Impreza)
https://youtube.com/shorts/Q49LGUj5JMI?feature=share
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
Maintains functionality after approximately 1 year and 10 months
There are so many types of Motorcycle Covers that it is hard to know which one to buy.
I don't think price is proportional to durability, and there's no way to find out in the first place…
So I used to buy relatively inexpensive ones and replace them each time they tore.
This time, Doppelganger StretchMotorcycle Cover2/I bought the DCC533-GY as an inside Cover and wanted something that would last as long as possible to keep the inside dry, so I bought this Motorcycle Cover.
[How is it used?
It is stored completely outdoors and Blue Sky without a carport and is exposed to wind and rain 365 days a year.
It is a harsh environment for Cover because there is no obstruction around it and it is exposed to direct sunlight.
Was the one you received as per Image?
Yes, it was approximately as per Image.
○○The lack of a long vertical seam at the top of the head (back) is wonderful…3
I think the fabric is good to begin with.
When you hang the Cover, you can check the front and back by the color of the carrying handle, which is surprisingly convenient.
When the draw cord is pulled to tighten the foot, the lower part of the front and rear Wheels come out (it is sad that the Wheels get dirty from the wind and rain) …2
I was worried about rainwater getting in because the air ventilation is large, but there was no problem.
After removing the ○Cover, I crumple it up and put it in a bag, but it doesn't have any weird habits or tear in the fabric!
For YZF-R125, the height is perfect, but not tall enough.
I wonder if the high Seat has something to do with it?
How was your experience with it?
I have been using it for about 1 year and 10 months, and my impressions are as follows.
No seams have been cut.
○Waterproof property of the fabric is maintained.
○○Buckle & Belt is discolored but not cracked…5
I have also used the lock holes in the front and back and the seams have not frayed.
The front side of the carrying handle has faded from yellow to orange.
[Points to note]
Avoiding the edge of the Cover from the Side Stand allows the Draw cord to be pulled more (to take up slack in the Cover).
Tightening the draw cord and buckle&belt is important (if the cover is inflated by strong winds, dust particles can enter the cover and cause the cover to tear).
This is not the only attention point for this Cover. (LOL)
How did it compare to other products?
So far, I've used E Type by Y'S GEAR, Black Cover by DAYTONA, or a cheap cover sold at Home center, but so far, they are the same etc. or better.
Y'S GEAR and DAYTONA Cover… After about 2 years, the waterproof property has decreased and the long seam on the top of the head has torn!
Home center cheap Cover… Fabric ripped and RoseRose in less than 2 years.
So, based on my experience, I am quite excited about this Cover, which does not have a long seam on the top of the head.
I want it to last at least 2 years (2 more months!). If I have it for 4 years, I will become a Repeater.
View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
Sale price.
I bought it because of the Sale price, but at the regular price, I would rather buy another Cover.
I don't use the heat resistant Matte that comes with it.
View detail
Fits: YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR, YAMAHA NMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTYS, YAMAHA NMAX155, YAMAHA CYGNUS Gryphus
useful car cover
My motorcycle is YAMAHA's NMAX155. Since I often park my motorcycle outdoors, I need a car cover that can prevent rain and sun. The car covers I bought on other websites before are not satisfactory. I bought this on webike The YAMAHA original car cover has a very good rainproof effect. You can choose different sizes of car covers according to the length of your motorcycle. In short, I am very satisfied with this purchase---------------- --------------------------------------------- My motorcycle is YAMAHA's NMAX155. motorcycle is often parked outdoors, a car cover that can prevent rain and sunscreen is needed. The Yamaha original car cover has a very good rainfall effect. You can choose a different size car cover according to the length of your motorcycle. In short, this time is very satisfied Powered by Google Translator View detail
NMAX
Search as Service manual for 2021 NMAX SEG6J and Instruction Manual for handling is listed as GPD125A.
I ordered it, but when I received it and checked it, I found that it was listed as a previous model NMAX 125 Meteretc. and not a current model NMAX Service manual.
You need to re-purchase the proper product with a current Yamaha service manual and a replacement warranty.
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
Cospa best
[How is it used?
covered parking area for bicycles
Was the one you received as per Image?
Cheaper than expected
How was your experience with it?
This is about right for 125cc.
[Points to note]
Unlike Takumi Cover, it is not recommended for parking bicycles where it melts with heat or where rain blows in.
How did it compare to other products?
It is not comparable to Takumi Cover, but it has the best cost performance, and if you want to replace it in a year, this is the best choice.
Other items that would be helpful
Installation Point or hang
When I squeezed the →anti-flap tight, it fit the body of the car.
View detail
Fits: HONDA DIO110, HONDA LEAD110(EX), YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR, HONDA PCX, HONDA SPACY100, HONDA ZOOMERX, HONDA LEAD125, HONDA LEADEX, SUZUKI ADDRESS110, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI VECSTAR125, SUZUKI VECSTAR150, YAMAHA NMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTYS, YAMAHA NMAX155, YAMAHA CYGNUS Gryphus
useful car cover
My motorcycle is YAMAHA NMAX155. The car cover I bought on other websites was not durable and broke in one summer. This YAMAHA original car cover is made of thick material, and it is easy to put on the car. It also has directions that can’t be mistaken. It should be noted that you must not use it when the motorcycle is still hot, as there will be safety hazards. The purchase on webike is genuine. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. The hood I bought on other websites was very durable, and it was broken in summer. This Yamaha original car hood is thick and convenient to put it on the car. that it will not make mistakes. It should be noted that it must not use it when the motorcycle or is hot, and there will be hidden safety hazards. Webike buys the authenticity of the goods above. Powered by Google Translator View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Both Tank Bag attachment and Smartphone Holder attachment.
DAYTONA DAYTONA :Smartphone Holder Wide for Motorcycle
To
DAYTONA DAYTONA:Seismic Spacer for VibrationControlDevice Smartphone Holder3
The two are attached at right angles through the
If mounted on the Center of the Handlebar, it would interfere with GIVI's Tank Bag or hide the MeterScreen.
The perfect mounting angle prevents interference with both the GIVITank Bag and y’sGear's Middle Screen.
(GILLES TOOLING GILLES TOOLING:2DGT0215-BK)
Adjustable HandlebarRiser Mount Kit 2DGT
The Handlebar is brought to the front most at the Home center, and the 3mm thick round base of the Home center, Quantity:Pair (for Left and Right) (in high with 3 pieces each)
When going straight ahead, the phone is clearly visible; the ETCIndicator is also visible.
https://www.webike.net/sd/21956322/
https://www.webike.net/sd/24965608/
https://www.webike.net/sd/23218879/
https://www.webike.net/sd/24609240/
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Solid Cover that is not peLePeraed.
Used on a GB250 CLUBMAN, size is L and it covers just fine.
The material is solid, durable, rainproof, and waterproof.
The Heat Seat, which is used in the area where the Exhaust System hits, and the Band, which prevents the Cover from flying away in the wind, have been made easier to use.
I thought these features and quality were sufficient for the costumers.
View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
After 4 years of use, finally went for a replacement.
Water has started to seep through the seams where the seam tape has peeled off, probably due to the pressure exerted on the seams by the recent unusually large rainfall. From the marks left on the side cover of the vehicle, it seems that the water droplets that entered through the seams were carried along the inner surface and fell in the middle where they hung down due to the weight of the water.
On the other hand, the coating on the back of the fabric is still intact and there is no trace of water penetration.
As for the deterioration of the Others, first of all, the with-color part of the lock hole has been torn up. The holes themselves are fine and do not appear to be ripped. The Velcro that holds the laces together, especially the fabric part, has weathered and is no longer attached.
Based on the above, our conclusion from experience is that the recommended replacement period is about three years.
View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
I'm not sure if the durability is good.
I used it in rough condition for about 2 years and the durability and weather resistance is not good. if it is used inside Garage or under the roof, there is nothing wrong with it, but it is not suitable for those who leave it outside. I bought it because I trusted the manufacturer, but I am disappointed. View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
That's about it
Motorcycle Covers are all the same.
Since it is a DAYTONA, I thought it would be a little more blotchy, but it is still the same in large.
View detail
Fits: HONDA MSX125SF, HONDA CRF250RALLY, HONDA GROM, HONDA MSX, HONDA PCX150, HONDA PCX160, YAMAHA NMAX125, KAWASAKI Z125PRO, KAWASAKI D-TRACKER125, HONDA CRF250L, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA Dunk, HONDA MAGNA50, KAWASAKI KSR110PRO, HONDA SUPER CUBC125, YAMAHA XTZ125, YAMAHA SEROW250, HONDA SUPER CUB110, HONDA LEAD125
Good work.
The texture is good.
It is very good compared to the Chinese products on Amazon.
A little expensive, but I can recommend it!
View detail
Fits: HONDA DIO110, HONDA LEAD110(EX), YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR, HONDA PCX, HONDA SPACY100, HONDA ZOOMERX, HONDA LEAD125, HONDA LEADEX, SUZUKI ADDRESS110, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI VECSTAR125, SUZUKI VECSTAR150, YAMAHA NMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTYS, YAMAHA NMAX155, YAMAHA CYGNUS Gryphus
kf-30Seat cover
I had to replace my existing Cover because it was reaching the end of its life span. But I did it…
The package also says that the size is PCX compatible, but it is so small that the Handlebar Lock state, in which the Handlebar is turned off, does not allow the user to fully cover the screen.
Since there are few people who stop with the handlebar straight, we recommend that you purchase a handlebar that is one size larger.
For JF81/JF84/KF30, please buy a Middle scooter with Middle motor scooterBOX or larger size.
Too bad!!!!
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Quite good.
It has a front and back drawstring, so it is more fit than I expected, easy to put on and take off, and the material is solid and will last a long time. View detail
Fits: YAMAHA NMAX, YAMAHA MT-07, SUZUKI GS125, KAWASAKI VulcanS, HONDA Rebel300, YAMAHA NMAX155, SUZUKI BURGMAN200, HONDA REBEL250, HONDA SUPER CUBC125
An essential companion for RAM Mount
[How is it used?
Now in use on a commuting motorcycle, clipped into a Mirror mount.
Was the one you received as per Image?
Included Parts:Included, as per product page
How was your experience with it?
The paint on the product was smooth, with no errors depending on the location. The large size of the hole was as indicated and no modification was required.
[Points to note]
When the last fixation is done, it may turn around, so it must be held down.
How did it compare to other products?
No comparison products
View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
I feel safe.
I used to use a cheap Cover sold at Home center, but it ripped within a year, so I decided to buy a reliable Brand one this time.
Certainly the fabric is thicker and the Rubber on the feet feels more solid compared to the cheap Covers at the homestore.
You will need to apply the seal yourself, but a heat-resistant seal to apply to the area where the Exhaust System hits is also included for peace of mind.
View detail