Volume 19 of RIDEX.

In Motorcycle Manga, this is volume 19 of the well-known RIDEX.
Because I have already purchased it as Collection due to inertia,
I won't go into detail about the quality of the content,

The Machines in this volume are,
GSX1100S KATANAS, MACH, SR400, ZEPHYR, HondaDAX and,
They are all Motorcycles, which appear frequently in previous volumes, and which this author likes Large.

To be honest, though, it's all the same old rutty, full of stories that I've read before,
The pictures are beautiful, so if you consider that you could buy a Motorcycle color Illustration collection for about 1000 yen,
Cost performance is not too bad and not too much of a headache.

That's about it View detail

RIDEX has reached the 20-volume Large table!

At last, RIDEX has reached the 20-volume Large table!
congratulations

The LineUp of Machines appearing in this issue is as follows,
HondaCRF250.Harley883R, RZ50.RZ250, HondaGROM, GSX-R1000R, etc,
Unusually, it is not one side full of old cars, and Genre is not biased,
I liked reading it because it was an even mix.

If you could write in such a way that a wide range of Motorcycle riders can relate to it,
I wouldn't mind buying it again, what a great idea!

Well, my Motorcycle has never appeared in this comic.
I hope to see it published in the future, hopefully by volume 50 or so. View detail

The latest issue of RIDEX, volume 21.

You can still go and read, RIDEX Volume 21.

This time Motorcycle appeared in,
GB350, CROSS CUB, XSR900, DAX125, FZr750, HAWK11, etc,
Following on from volume 20, this volume also features many new Motorcycles,
Genre was also very easy to read as it was evenly drawn.

I personally like the design of HAWK11 on the cover picture,
I am satisfied with Motorcycle's color Illustration collection!

The same is true of REBEL's SEdition,
Short Cowl is Standard Equipment is Cool, isn't it? View detail

It is used in the maintenance of MONKEY125.

Easy-to-use Size feel.
Besides maintenance, it is cool just to hang STAND on the wall when storing, etc.
It is used in conjunction with a Stand Hook that attaches to the base of the Rear Shock. View detail

Used in maintenance and storage.

J-TRIP J-Trip JTrip:JT-1052RD
Narrow Roller Stand 8-18

I use it in conjunction with View detail

Great idea!

Spoke replacement and adjustment of CUB90 and CRF250RALLY.
We used to use a dedicated STAND that had several types of stick-type shafts, but they had disappeared before we knew it. I would have liked to have had a dedicated STAND if possible, but due to budget constraints, I prepared a wooden box this time. At the same time, I also purchased a leveler from a 100-yen store. Actually, this is the first time for me to use a taper type shaft.:Pair (for Left and Right) The wheel bearing is clamped with the Spacer from the Spacer and secured with the Screw. It is very easy to use and easy to fix. The taper type does not require multiple shafts to be stored, and as long as the wheel bearing is not loose and properly seated on the rim, the taper type will center the shaft properly. I don't know how long the taper type has existed, but whoever thought of it is amazing.
At first I thought of substituting a Pipe of the same diameter as the Shaft. When I actually used this product in my work, I realized that it is one of the most convenient and necessary tools. View detail

J-TRIP J-Trip JTrip Short low Ra Rear Tan

We used to use a certain A0-tro product, but its strength was not good enough, so we were considering J-TRIP, although it is more expensive.
After purchasing the product, I am very satisfied with the stability and the ease of raising and lowering the product on a Large Motorcycle. View detail

ChainMaintenance

For ChainMaintenance and Wheel Polishing
Very helpful. View detail

For Maintenance

Light weight, good appearance
It's a good product
I was not sure about JTrip, but I am glad I chose this product. View detail

Cost performanceOK

This Funnel seems to be an Original product of PMC? and less expensive than those of MikuniBrand and YOSHIMURABrand.
I bought a slightly longer 40mm for my Φ36 because it seemed to be well stocked. The shape is not too curl, simple and beautiful, and I have a good feeling about it.
TMR's Funnel has a rather fine and thin-walled Pitch at the mounting Screw, which gives the impression that it is a little Large strange to make, but there was no problem at all in using it, and I was highly satisfied with it.


Unlike KEIHIN's CR and FCR Carburetor Bodies, TMR's Funnel is available in various lengths for each caliber, so the lineup is diverse.
KEIHIN, which has only Small body and Large body, is more universal.
(Unless you own several Motorcycles, I don't think you need to worry about this.)

In addition, Mikuni's Funnel is difficult to buy because the Spec. is difficult to understand when purchasing, and as of now, there are so many items that are listed as missing in WeBig.
Some things have strong funnel curl, some have no curl at all, some have holes in the edges of the funnel, etc. There are other detailed Spec. besides YOSHIMURA's Dual stacks.
I think it's just the wide variety of products that are missing.
I am wondering how TMR determines the Funnel Spec. at the time of shipment. Is the optimal Size selected by the distributor for each car model?
Some have a very short funnel, some have a standard 50mm funnel, etc. This is also a confusing area to buy for hanging.
In this case, it would be more efficient to distribute without Funnel anymore. View detail

I bought a used Z900RS but it didn't come with Instruction Manual.

I bought it because it is better to have it than not to have it.
WeBig is also a convenient place to purchase these items. View detail

This is the Sokojikara of JAPAN!

I bought this for my VSTROM250SX.
Since this Motorcycle is almost a Jig Sur, STAND for Road is suitable for it.
I have a thing for OFF, but I could not use it at all for this Motorcycle.
And it took me a bit of time to use it because I have only used the kind that lifts from the belly for OFF, but, well, I think I can handle it.
And one more thing, I need an Option nail for this STAND, but I'm yuuuugggee! "V-receiver, 2." I was not sure what it was for. I didn't really know what it was for, but I thought, "This is it for now, right? It seems to be usable for now. However, it does not seem to be the ideal shape for motorcycles.
It was relatively easy to hang, but I had more fear when it came time to take it down.
At least you have to get used to it, but you will probably only use it for Chain adjustment, so the Chance may be small! (^。^) y-. O- View detail

JTrip L-Shaped Receptor

Rubber that came with the original (Red) I bought a replacement because the "Black" part was falling apart and I had never seen a Black Rubber before I learned about WeBig. View detail

I can't give it to you without it. It is a must buy!

I bought this Option to use the Jay Trip , Low Roller stand (item #:JT-1052QR).
"V-receiver, 2." They say.

To begin with, I did not purchase STAND out of necessity, but I purchased YOSHIMURA's Rear Stand Bracket Set for VSTROM250SX. (M8) I had been putting on the Option (Option 1) for the time being, so I bought this Option because I had seen it being used with the Jig Sur which is almost the same as the Option (Option 2) and I thought it would be good.

As expected, it worked properly.

However, if you don't use it well, the red rubber part on the end may come off, so it seems that you need to get used to it.
I am a novice when it comes to STAND for RoadMachine, so I will do my best to familiarize myself! View detail

To those who maintain it.

Purchased for maintenance. Necessary for doing my own maintenance. View detail

Great tool with adjustable height.

Used on 2023 Honda Rebel 1100 - The quality of itself is metal pretty sturdy, very easy to assemble, I know some tools out there require to modify the jack to fit Rebel 1100 but this one needs none, the only thing you’ll need it turn both screws knob face front when you assemble it, if it’s on the wrong direction it’ll short about 1” to capture the frame. Overall is a great tool and affordable weigh nice color. The only thing O suggest buyer should consider bulk other order and combine shipping with other products with it, because this set alone with shipping it cost almost double. View detail

Convenient

I bought it for Chain refueling and washing for Vehicle. View detail

It has been helpful for maintenance.

This is very useful for maintenance, as it allows us to see how to disassemble and assemble the equipment in advance. View detail

It has been helpful for maintenance.

It is very useful for maintenance because I can check the disassembly and assembly methods in advance. View detail

It's tough to go it alone.

If two people do it together, there is plenty of room, but alone it is quite scary.
If you have a Rear Carrier with Grab Bar, you may be able to do it by yourself, but it is very difficult because the REBEL is low and there is no part to grab on the Rear side.

I did it with two people at first to make sure I could do it, and then I tried it alone, but I almost beat him.

I think it would be wrong to object to the fact that it cannot be done by one person, since the Manufacturer recommends a two-person operation in the first place.
Motorcycle maintenance is basically a one-person job, so I felt like Minus in that I had to get help every time! View detail