Although there is a high degree of freedom

The flexibility is high, but the number of mechanisms is large, so it can be a bit of a challenge to install without thinking about it.

Texture was appropriate for the price, and visibility was not much different from OEM.
With a single cylinder, there is a certain amount of vibration.

The hardness of the moving parts can be adjusted by you, giving you peace of mind. View detail

Purchased for commuting

It feels like you are wearing armor, but it doesn't get in the way at all while riding. I think it is an Inner protector that fits any Jacket. I don't know how it will feel if I don't have an accident. I don't know how it feels without it, but I think the sense of security is very different between with and without it. It is good in spring, fall, and winter, but it may be a little hot in midsummer. View detail

Buy for summer

I bought this one for the summer, which I thought would be cooler and less affected by the sun.
Arrived and tried on the product....
I heard what sounded like a drop and when I checked, a makeup Button had fallen out.
It had fallen out of the area where the Tag? is stopped at the back of the neck.
Unfortunately, I repaired it with glue (T. T) View detail

The sewing of the fingers is particular?

How was your experience with it?
Can I say that the good thing is that I don't feel anything special using it, and the folded seam allowance of Inner Sewing never hits my fingertips.
Leather is used in areas where there is a risk of injury in the event of a fall, while stretchy fabric is used in areas where there is a lot of flexing, so there is no sticking and it is comfortable.
I think it is best suited for touring and city driving.

[Was there anything that disappointed you?
So far, none

What are the specs of the product, such as protector?
I think it is sufficient for touring and city driving.

How did it compare to other products?
I used to use hit.air, but this one has slightly longer fingers or my fingertips don't hit the seam allowance.

Other items that would be helpful
Sewing is basically Inner Sewing, but only the middle, ring, and small fingers are sewn on the outside. Some obsession." I bought it because I felt that the View detail

It's pretty good

The Jacket I had been using was getting tired and I decided to replace it.
I am using it with a Hard Type Brest guard. I had it exchanged to LL because it was a little tight in LSize due to my growing belly.
It is breathable and a little chilly when worn in early spring. It is best to use it in midsummer.
The design is good and I like the Large change. View detail

Excellent texture, sufficient ventilation effect

In spring and fall, I used to wear a Rain Coat over all mesh for windproofing, but I took the plunge and bought this Wear. I chose the L size because I will be attaching a certain company's inner protector to my chest and back, but there is only a little room in the torso, which is fine. If I had used the included protector, I would have chosen a M. The ventilation is perfect for a bridge until the all mesh season. Especially in early summer when the temperature difference between morning and evening is extreme, it is comfortable if Ventilation is turned on all the way. Plus rating is also for the fabric's Stretch and good feel on the skin.
The only thing that bothers me is that the Protector is soft, so I plan to replace it with the Option "Hard". View detail

Exactly what I was looking for.

Ideal for winter commuting.

It takes a bit of hang to put it on, but it takes only 10 seconds to take it off, so you can take it off right away on the go.
It is warm enough, and the front side is a Nylon fabric like Cordura, which can be substituted for the Rain Coat (below) if it rains a little.

The buttocks are open, but with the Black Pants it is not noticeable and the cold does not bother me since I am on the side sitting on the Seat. View detail

250TRSide Back

The rotating mounting shaft is great for adjusting to fit the type of car, bag, and application. Even if the price is a little high, we recommend the inconspicuous black color. View detail

Wow that's cool

It is Tapered, but I think it is a little too thin for my uncle.
I thought that the leather part could be increased in area. View detail

In Bag.

I put it on the back of RoughAndRoad and it is easy to use without any discomfort. I was worried that it might come off, but my fears were unfounded. When you put it on and twist it, there is a plastic potch and it becomes like a simple lock, so I don't think it will come off. However, I have given up on it because I can't take any countermeasures against theft. View detail

Design is good, but Outsole is PeLePera

I bought these shoes because I wanted casual riding shoes. However, they did not fit my high instep feet and I got blisters on my small toes after only about 500 meters of walking.
The outsole is PelePera, which is so thin that it makes walking on the pavement uncomfortable and tires quickly.
The Hold feeling at the ankle was good. View detail

For WORKMAN's Jacket.

It is a little too Large for WORKMAN's Mesh jacket, but this is not a problem as it can be easily cut with Scissors.
Of course, I think it can be attached to RoughAndRoad's Jacket with no problem, but I don't know because I don't have it. View detail

Recommended for people with thin legs

I think the design and texture are good. The fabric looks durable and seems to have good protection performance.
The suspension has a slim Fit feeling and there is no flapping, but I think it is tight for those with thick legs.
Since the Knee Protector is a three-dimensional and bulky Type, changing to a thinner one would reduce the tightness around the knees.
Waist size can be adjusted with Velcro, so they can be worn without belts.
Personally, I would like to move the Knee Protector up another 1 or 2 cm or so.
We drove during the day when the temperature was 28 degrees Celsius, but it was cool and comfortable with a breeze.
I think the leather lining on the inside helps to provide a good knee grip and helps to block out heat from the motorcycle.
Riding performance is good and is recommended for those who do not have thick legs. View detail

Used for DT50Mirror BracketBoots.

I replaced the MirrorBoots on my DT50 because they had deteriorated. To replace the MirrorBoots, remove the screws from the MirrorBoots, remove the MirrorBoots, and install the MirrorBoots. View detail

Size selection with room to spare is recommended.

I had been using DEGNER's Porch, which is compatible with P.A.S. Mount, and purchased it to install it in a vertical position in combination with Meter and other equipment due to a change of vehicles.
Back provided for Camera [Color] It is a Clear window, but it also has a secondary use through which you can see the meters on the other side of the Porch.
The size of the iPhone I am using can fit in the Smallest Type of the same series, but this size was the best for me because it allows for more room when considering Cable's handling. View detail

Half Finger Gloves

In the summer, when removing gloves from hands, it was difficult to remove them when they were sweaty, but this product has an original loop for removal and can be taken off smoothly.
The fit is a size M, but it is slightly large. View detail

Windproof enough for early spring

I am looking for a pair of gloves to use in early spring. I chose Wind guardSpec. which I have purchased before.
I chose XL size so that it would not be too tight like the Ruff&Road Winter Gloves that I am currently using. However, the thin interior of the LL was not too tight, and I felt that it would have been sufficient.
As for the windproof effect, I went to a mountain pass with snow remaining in early April, but my hands did not get cold and I was able to concentrate on driving.
The Knuckle guard of Carbon, which is the standard rough&Road, provides a sense of security. The design is red, but I think it would have been better if it had more red parts and was a little more flashy. This is my personal feeling....
Overall, I think it is cosmetically good considering the Guard, wind resistance, etc. I can't say what else I can say because it is a matter of taste, etc., but I think it is good for running in slightly cold weather in early spring and fall. View detail

Good vibes

It is a little difficult to adjust the movement, but I am satisfied. View detail

Warm is warm

I bought it because my Over Pants that I had used for years were falling apart. the Size may have been wrong, but it was not unusable, so I used it.

It is so easy to put on and take off that it is a big surprise. I thought it was wonderful that I did not have to take off my shoes. On the other hand, I felt a little uneasy because some parts were exposed.
My fears were proven true. The draft was cold. The protected part is warm enough to be hot, but the exposed part is cooled down by the wind. This is how it feels at low speeds in town driving, so the situation may change as the speed range increases. View detail

Does a surprisingly good job.

This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it. View detail