Reviews
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Has the part number been changed?
I have not seen any particular note, but I assume that if you order with this part number, you will probably receive the one with the -80 suffix, and from the aggregate information on the Net, it seems that some Filters, including the -61 one, have been unified with the new part number (-80 suffix).
It is a bit of a shock to receive a different part number without any explanation, but you will be able to use it without any problem.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
When in doubt, SUNSTAR
Balance of lightness and durability, true circle, etc.
In terms of color variations and price, the xam is the better choice.
For now, you can't go wrong with SUNSTAR.
View detail
After all, it's OEM!
Along with the oil change, I replaced the Oil Filter. I can't tell if the Oil Filter is good or bad right away, but it gives me a different feeling of trust and security. When I replace it again, it will be OEM. View detail
Kagoshima Touring for 1,600 km
Saganoseki→Aso→Takachiho→Cape Sata→Nichinan and Kyushu Touring 1600 km or so, no problem! View detail
exchange
I bought this for a ZZr250 Rear Sprocketfor replacement, it is lighter than the OEMSprocket and looks better in Gold. It is an applicable product and I was able to install it without any modification. View detail
Gsx-r1000 17 to 21 years old is not hooked up to the Gsx-r1000!
Gsx-r1000 17 to 21 years old is not hooked up to the Gsx-r1000!
Correct the fit.
View detail
light
I need to change Final to run Circuit.
Purchased
Duralumin and very lightweight.
I also feel that Motorcycle movement has improved.
Durability would be better.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
lightweight
I purchased the SUNSTAR RK-102-41 for my YZF-R25. I have been using the 41 for my Driven Sprocket, so I decided to use the same one this time as well. View detail
Reliable OEM
The XSR900 is the first DIY replacement.
There were cheaper filters available, but we went with OEM for reliability...
Well, I guess it's a matter of mood (chuckles).
View detail
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
SBS Street pads fitting to GSX-R1000
Trying a different compound of these SBS pads. Not used this brand before and hope they are as good in certain situations as the Brembo street ones I have tried. Very good price. Easy to find. Shipping cost was good as I also had other brake pads in the same order. Everything in my order was perfect. These pads are clearly more street oriented as can be seen witht eh material on the brake pad. Very much cannot wait to try these. Also bought rear ones for same bike. View detail