Reviews
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
Protective Cover
I am worried that it will melt in the Exhaust System, so I let it cool for a while before using it. Does anyone know if it will not melt or not? View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
Excellent braking performance.
I used to use Shoe of other brands, but this time I used NTB for the first time. I don't feel much change in the effect, but the brake noise during operation has been eliminated. It feels good. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI SEPIA, SUZUKI LETS
So bad
I used it with a new pad, but it vibrated a lot when I applied Brake. It must have been distorted from the new pad. View detail
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
spares
I bought this as a spare and I think it is comparable to the OEM Product. View detail
Fits: SUZUKI let's, SUZUKI Let's G, SUZUKI Let's play basketball., SUZUKI Address V50
small object
Simply open the Case lid and replace it. It was easy. View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Fits: SUZUKI LETS5-G, SUZUKI LETS5, SUZUKI LETS4-G, SUZUKI LETS4, SUZUKI LETS4-Palette, SUZUKI LETS4-Basket, SUZUKI LETS-Basket, SUZUKI LETS-G, SUZUKI LETS, SUZUKI ADDRESS V50-G, SUZUKI ADDRESS V50
small object
It arrived quickly. It is not sold in stores, so it is very helpful. View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail