Good product

Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail

530-1010216

Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail

KITACO Axle Protector Set (color black)

About quality and texture - Build quality is always top notch with Kitaco. Great craftsmanship always. Difficulty of installation - Installation is very straight forward and easy, just slide axles out and install with provided washers. Cost performance and comparison with other products - Very affordable. About shipping and packaging - Packaging is well packed and secured. View detail

I got a lot of iron powder.

I used it to clean up my new MONKEY125. It was my first and second DIY oil change, but it was done without any problem. View detail

Acceleration Up

15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed! View detail

Brake Pads for Street Riding

I purchased and installed these Brake Pads for my Ninja 250SL for urban driving (commuting). The cost performance is unquestionably good, but it is still a bit expensive. "Red Pad. Compared to the OEM Brake Pads, the Brake Pads are more controllable and cost-effective, so we recommend these Brake Pads to Mainers who drive in the city. View detail

Can also be used with Hollow Axle Shaft.

The name is "Axle Protector", but I installed it as a stress-up part because I thought there was not enough red around the front tire rather than to reduce the damage of the vehicle at the time of a fall. I already had an experience that I had a hard time to put in the Shaft when I removed the front tire by replacing it with KITACO's Hollow Axle Shaft, so this time I used DAYTONA's Maintenance Stand for Front. I was able to insert and remove the shaft easily because the vehicle weight was not applied. I think it is difficult to install by DIY because the fork hole, collar, and wheel are not aligned unless I lift up the maintenance stand or the handlebar, etc. I am satisfied with the red accents around the front tires, which are mostly black parts. View detail

YOSHIMURA's Review

High quality materials and craftsmanship:YOSHIMURA products are always of high quality, and this optional spigot is no exception. It is durable and provides reliable performance over a long period of time. View detail

C125 is the best choice

I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator View detail

Genuine DID 420NZ3 Gold Spare Chain Link

I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

purchasing a spare part

When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product. View detail

Not attached to nsf250

It was written for nsf250, but it could not be used and was only for nsr50. View detail

Did not fit.

The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail

SP TAKEGAWA discharge bolt (w / magnet)

What are you waiting for? What are you waiting for? I want to know what I want to know. I want to know what I want to know.
Although it is not a visible part, this product is really good in that it can filter out iron powder inside the bike. The finish and design are wonderful. Thank you for the quick delivery. I would recommend this product to others. -------------------------------------------------- -------- It's not something you can see, but it's really nice to have this product to filter out the grit from the inside of the bike. The finish and design is great. Thank you for the prompt delivery. I would definitely recommend this product to others. Powered by Google Translator View detail

KITACO Drive Sprocket (Front)

It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator View detail

A well designed product that integrates into the factory engine case to add a useful feature

About quality and texture - The drain bolt with magnet from SP Takegawa is made from billet aluminium with precision machining and a red anodized surface finish while the quality from the overall fit and finish is perfect. About the feeling of use - The drain bolt with magnet is a well designed product that integrates into the factory engine case to add a useful feature that helps with engine longevity by removing unwanted metal from the oil. Products to buy together - A key product to buy together with the drain bolt with magnet is the SP Takegawa LED temperature guage that will allow for monitoring of the engine oil temperature to ad further longevity of the engine. Difficulty of installation - The installation of the drain bolt with magnet is a simple task that took 0.2 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the drain bolt with magnet to the engine case. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the drain bolt with magnet is priced higher this time round. The design of this drain bolt with magnet with it's sensor hole is what sets it apart from the others. About shipping and packaging - With there being no cost difference between sea freight and EMS for the oil filter cover, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very basic. View detail

Cosmetically good.

This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail

Axle guard by SHIFT UP

Grom (JC92) I installed it in
Material:With DURACON, it came off from the base when it fell over and had to be replaced even though it was still usable and worn out, but Material:With aluminum, you don't have to worry about that, so you can use it for a long time.
I am very satisfied with the price and the color selection. View detail

good stars

Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.

The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original.  It works clearly. ---------------------------------------------------------- The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly. The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly. Powered by Google Translator View detail

For normal use, there is no problem at all.

The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List. View detail