A little short, a little thick

I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people. View detail

1P2014

The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail

Anyway, it's bright.

The ADDRESS V100 has a reputation for having a dark headlight to begin with. (1994 model) attached to the
I am impressed that I can now see in front of me when driving at night, but in general, the light intensity is just normal.
Still, it is hard to believe that it is +6.5W, and you can feel the difference between just a light bulb and Halogen very clearly.

We do not yet know how durable it will be, and we do not know if the increased power consumption will affect the battery charge.

Well, even if the Battery goes up, you won't be able to leave because the KICK is on.

Its Risk is unknown, but I think it is worth changing it once for V100Owner who has problems with Headlight.
That's how bright it is! V100 is w View detail

Easy installation, no brightness problems.

Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness. View detail

The size is just right and the texture is good.

Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner. View detail

WhiteLight and good looking!

It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light. View detail

Bright and low power consumption

I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling. View detail

It's a good product

It is being used well as a replacement for the genuine Benley 110.
It fits well without any discomfort and the operation is no different from the original.
This is a satisfactory product at an affordable price.
Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. -------------------------------------------------- -------- It is being used well as a replacement for the genuine Benley 110. It fits well without any discomfort and the operation is no different from the original. This is a satisfactory product at an affordable price. Although this is unlikely to happen, I am willing to purchase this product again if it breaks. You will never regret it. Powered by Google Translator View detail

I put it on my RG 50Gamma.

It's just like changing a light bulb.
There is no problem View detail

Cool grips

I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.

I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator View detail

Halogen is still active

I have tried many things, including external with Color and Valve, but the OEM Halogen light is the easiest to use and I returned it.
Nowadays, LEDs are used in new cars, and Halogen light is still old-fashioned, like the Image of old.
But when I looked into it, I realized that it is quite practical.
The first time the project was completed, the project was completed.

Halogen light
A type of white light bulb that generates heat by passing an electric current through a tungsten filament (resistance) and emits light by blackbody radiation due to high temperatures of up to 3,000 degrees Celsius. 。 The difference is that Halogen gas is sealed inside the valve in addition to inert gas.

Features,
Smaller in size than white light bulbs
● Light is stronger than white-hot bulbs, and gets considerably hotter.
It is used in situations that require spot light intensity, and is also used in Stage lighting due to its strong light emission. 。 In addition, the brightness and color temperature rarely change while the power is on and the lights are turned on.
→Easily adopted for Motorcycle and Car headlights.


Advantages of Halogen bulb
Long life. →.
In a white light bulb, Tungsten, which is the filament, evaporates and becomes thinner as it is used, and at the same time, the evaporated Tungsten adheres to the glass surface called Valve and turns black, resulting in a decrease in illumination. 。 In contrast, Halogen bulbs have a longer life than white-hot bulbs because evaporated Tungsten returns to TungstenFilament by HalogenCycle using Halogen gas added in the Valve.

2) High brightness →.
Superior heat resistance and higher temperatures than typical White Heat bulbs, allowing for higher voltage and higher luminance 。

(3) High heat and shock resistance→.
Quartz glass is used in the valve to handle high temperatures. Quartz glass is made from quartz and is characterized by its excellent heat resistance, impact resistance, and transparency. 。 As for heat resistance, thermal expansion is very small, making it resistant to sudden changes in temperature.

[Characteristics
Halogen light is inexpensive and has good transparency.
The brightness of halogen bulbs is inferior to HIDs and LEDs, Soft luminescence that does not dazzle when looked directly at." features.
Halogen light is more transparent and easier to be detected by others when it rains heavily. However, Halogen bulbs do not illuminate the road surface more than necessary, so there is a Merit that allows driving with sufficient visibility even in the rain.
Halogen will always pass the safety standards required for vehicle inspections, etc.

OEMs are required to meet safety standards, etc. [Color] I decided to try Halogen light, which is used by OEMs if you are going to buy it, since it is shipped in a CLEAR condition.
I was also convinced that practical cars with Halogen attached are still working in the market.

good point
Easy to drive at night. ◎Easy to drive at night.

◎No reflection of the road surface.

◎Visibility there even in bad weather.

◎Low cost. ◎Low cost, yet meets safety standards.

◎Bulbs are hard to burn out.

◎Do not bother the car in front of you or oncoming traffic.

A bad point
▲Image is often viewed with the prejudice that it was a long time ago.

Halogen head lamps are inexpensive to purchase and easy to replace.
The disadvantage is that the brightness is weaker than DischargeHead lamps and LEDHead lamps, but there are many Merits to continue using them in terms of safety standards, cost performance, and convenience. View detail

The ball joint could be a little stiffer from the start….

The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …) View detail

Very happy

Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail

It's not cheap or bad.

My own ideas on how to choose Motorcycle Covers.

○ First, consider the performance required to protect Motorcycle.

It is not enough to apply a cover to your product. Check the waterproof and water-repellent properties.

Check it out especially if you spend a lot of time parking your motorcycle! After a rain or during the rainy season, the inside of the motorcycle cover tends to get very humid, so a humid environment is not good for your motorcycle. 。 If you remove your Cover every day when commuting to work or school, you may not have to worry about it much, but if you do not ride your motorcycle frequently or frequently, you should choose one with ventilation.

Small scratches when attaching and detaching should be avoided! Can the inside fabric also be protected from Check tampering?

Check here for security. Also, check if there is a hole for a chain lock. It is important that the chain is visible from the outside of the cover!


I bought this based on the above four points.
Certainly the more expensive Covers are superior in durability, etc., but since they are basically outdoors, it is essential that the fabric weaken over time.
I think it is not the price.


good point
○ Water repellent performance of the fabric is sufficient for the need.

○ The bottom of the Cover is open, not sealed, so there is no need to worry about ventilation.

The fabric is smooth and soft TaffetaMaterial, so it will not damage the body of the vehicle.

There is a hole through the ○○ bar type lock.

○ Inexpensive, but with basic functionality.

A bad point
I thought it would only last about 2 years.


Even an expensive Seat will inevitably deteriorate over time, and if we have to replace it eventually, it would be good if it is inexpensive and has basic functionality. View detail

ALCAN hands iGrip

I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail

subtle

Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb. View detail

Cospa is nice.

O-ring for CROSS CUB (JA45) level gauge
Once a year or so, when oil stains from the threaded part of the Level gauge become noticeable, we replace it. View detail

KITACO KITACO Non Fade Brake Shoe

2Quantity as it is used for CANOPY:Set was required.
I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved. View detail

KITACO Non Fade Brake Shoe

I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved. View detail

It works well

This is a 2007 ZOOMER.
The mileage is about 6,000km as I only drive it occasionally, but the Brake squeal was getting worse, so I replaced it.
At first, the effect was not so good, probably due to the lack of hits, but then it started to squeak.
When I disassembled it, I found that it was still on one side, and after licking the perimeter with a file, it looked better.
I am satisfied with the soft but firm feeling of working well.
Durability is not yet known. View detail