Reviews
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Excellent pads
About quality and texture
The brake pads were chosen for Yamaha Vino; this brand has already been tested more than once in harsh urban braking conditions, so the choice immediately fell on them
The quality of the linings is high, they are dust-free, even after 5000 kilometers there is a minimum of brake dust in the drum
The glue is not visible, but there is enough of it, the sizing is very good
About the feeling of use
Operation on the next scooter showed its best side, braking is effective, even though it is a drum brake
With the correct cam setup, the brakes grab instantly and hold the wheel perfectly when pressed hard.
The average service life is about 10-15 thousand in urban conditions with frequent braking
Products to buy together
The kit includes everything you need, brake pads and springs
Difficulty of installation
Easy installation, you need to remove the muffler and rear wheel, then replace the pads
Cost performance and comparison with other products
Low cost compared to the original, and the braking quality is approximately 1.5 times higher
About shipping and packaging
Excellent blister packaging, no damage during delivery
Any concerns, cautions, or advice when purchasing
I can only recommend this product, already tested with three scooters ---------------------------------------- ------------------ About Quality and Texture The brake pads were chosen for Yamaha Vino, this brand has already been tested more than once in hard urban braking conditions, so the choice immediately fell on them The quality of the linings is high, they are unbearable, even after 5,000 kilometers in the drum minimum brake dust Glue is not visible, but it is enough, the gluing is very good ABOUT THE FEELING OF USE Operation on the next scooter showed itself from the best side, braking is effective, although it is a drum brake With proper tuning the fist, the brakes are grasped instantly and hold the wheel perfectly with a strong press The service life of an average of about 10-15 thousand with urban conditions with frequent braking Products to Buy Together The kit has everything you need, brake pads and springs Difficulty of Installation Light installation, it is necessary to remove the muffler and rear wheel, then replace the pads COST Performance and Comparison with Other Products Low cost compared to the original, and the quality of braking is about 1.5 times higher ABOUT SHIPPing and PACKAGING Great packaging in a blister, damage during delivery is not Any Concerns, Countions, or Advice When Purchasing I can only advise this product, already tested by three scooters Powered by Google Translator
View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
ngk bpr7hs
I bought these ngk candles, I haven't installed them yet, but I will definitely install them next season, they look nice and good, I think they will last me a long time!
-------------------------------------------------- -------- I bought these NGK candles, I have not installed them yet, but I will definitely install them in the next season, they look beautiful and good, I think they will serve me for a long time! Powered by Google Translator
View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
If you have trouble choosing a Motorcycle Cover, buy this one!
I bought this for storage of my Honda Grom that I always use to commute to work.
The motorcycles in my house are basically using DAYTONA's Black cover.
After buying various Motorcycle Covers for a long time and making many mistakes, I feel like I have finally arrived at one answer.
Until long ago, I used to buy motorcycle covers because they were just cloth and they were all the same, so I just went with the cheap ones, but the cheap ones were thin and deteriorated quickly over time, so I had to avoid them the moment they got caught on the car body, and for a long time I found myself unable to use the large ones in a short time. I had been keeping it for a long time. It was rare for them to last a year, and the large ones often ripped after a few months.
In this situation, we tried DAYTONA's Black cover. Although it deteriorates over time, it has lasted more than two years compared to the low-priced products of other companies, and the fabric is somewhat durable and does not avoid easily.
The Black cover is a safe and long-lasting product.
However, I gave it 4 stars because I frankly think it is expensive for a mere fabric.
Since you don't want to waste time choosing a Motorcycle Cover, just go with the Black cover.
View detail
Fits: YAMAHA BJ, YAMAHA Axis 50, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Grand Axis, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA Jog Z, YAMAHA Jog ZR, YAMAHA Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA jog sports, YAMAHA AXIS 90, YAMAHA BWS100(BWS)
KITACO SUPER PERFORMANCE TORQUE
About quality and texture: Good built About the feeling of use: Satisfied setup Products to buy together: I bought with rear absorber Difficulty of installation: Easy during maintenance Cost performance and comparison with other products: Pickup increase and reliable About shipping and packaging: Fast shipment and packed proper Any concerns, cautions, or advice when purchasing: Get the cvt or belting set View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
Careful with Size, but if it fits, it's easy!
Used for TW200E
The previous Owner has been playing around with things, so the Headlight is unknown what the OEM one is, but it fits the Limit and was very easy to install.
The head seems to be 20mm longer than the OEM Product, so size confirmation is essential.
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
Hunter grips as original
Hunter grips are like the original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend to everyone, I will still take. -------------------------------------------------- -------- Hunter flips as an original and even better and better than the original grips. The rubber itself is thicker, denser, and the price is very budget. I recommend it to everyone, I will still take it. Powered by Google Translator View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
It is said that the size is just right for a grom. If you don`t put a top case on it
I bought the M Size after reading the impressions that it was just right for the Grom, but I had forgotten about the Top case.
It is not impossible to use it, but I regret that I should have chosen a Large size.
I think the quality is good
View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
Large satisfied
It is quite solidly made and I am satisfied with Large!
Just size for Z125PRO as well.
Heat Insulating Material that can be affixed to the Exhaust System portion and
Don't let it flap in the wind.
I also like that it comes with a Belt!
View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
DR250S requires modification (rmx250 too?)
I found a ph8 ledValve from Pine Stripe and bought it for my DR250s.
I was wondering if I could just snap it on since I saw the same Headlight rmx in the "Compatible Car Models" column, but the product length is too long and the Valve does not go all the way into the back. It seems that I have to cut it down quite a bit. (I thought I could just pop it on, but it's too long and the valve won't go all the way in.)
I wish the ph-8Valve had been designed to be a little more compact since it is often used in off-road vehicles…
View detail
Fits: HONDA CUB [Cub]., HONDA CUB [Cub]., HONDA CUB90 [Cub]., HONDA GROM [grom]., SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI ADDRESSV125 [ADDRESS]., SUZUKI BIRDIE [Birdie]., SUZUKI Birdie 50, SUZUKI Birdie 50, YAMAHA GEAR [gear]., YAMAHA Town MATE90 [Mate]., YAMAHA News MATE [Mate]., YAMAHA News MATE80 [Mate]., YAMAHA News MATE90 [Mate]., SUZUKI DF125, HONDA APE100 [Ape].
HUNTER Grips
HUNTER Grips Excellent grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! Great grips, good pattern, good value for money. Universal option for almost any moped. I take not the first time, everyone is happy! View detail
Fits: KAWASAKI KSR-I, KAWASAKI KS-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI ADDRESS V50, SUZUKI AddressVTune, SUZUKI GAG, SUZUKI HI-UPR, SUZUKI ZZ, SUZUKI Address50, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS V100
Even with the Rear Carrier attached, it's almost wrapped around.
The Exhaust System heat-resistant cloth was peeled off as if the glue had floated off due to exposure to rain, but it is still usable without any problems.
I can't hide it under the Wheel, but I'm sure it wouldn't be a problem with the Rear box on?
View detail
Fits: YAMAHA Jog Z, YAMAHA JOGC, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA APRIO, YAMAHA APRIO, Others , YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA Remote controller jog, YAMAHA VINO, YAMAHA SUPER JOGZ
KN Project BlackMotor
This is recommended when the cell is not running well even though the compression ratio has been adjusted after bore-up. It turns very well. It can also be used as OEM Cell Motor Repair Parts. View detail
Fits: その他 , YAMAHA Grand Axis 100, YAMAHA gear, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA VINO, YAMAHA TZR50, YAMAHA TZR50 R, YAMAHA TZM50R, YAMAHA JOG Aprio EX, YAMAHA RZ50, YAMAHA JOG Aprio 2, YAMAHA JOG Aprio, YAMAHA JOG90, YAMAHA JOG Sports, YAMAHA JOG Z2, YAMAHA JOG ZR, YAMAHA JOG Z, YAMAHA JOG EX, YAMAHA JOG C
It works fine as a function.
Fits YSR80 Normal cab.
The effect as a Power Filter was fine.
I chose the one with Cover because I often drive in the rain, but the Center was out of alignment and the Filter was in contact with the edge, so there was a lot of vibration during air intake.
I'm not sure if it's just because the price is so low or if it's just because the price is so low. I am a little disappointed though.
View detail