Reviews
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Genuine DID Spare Chain Link
I was in need of a few spares for various chains I have in stock and this 520 DZ2 was one of those I stock but have no other spare links. I find it is always good to have spares in stock as even though the original chains do come with a link like this, occasionally they do get damaged and then you are stuck. Finding the right chain link was easy as I just checked down Webike's inventory for the one I wanted. The price Webike have these for is brilliant and better than I could source locally. I did order quite a few different types of chain links as I do stock a lot of various chains anyway. As these were all being shipped together, this also saved on a little postage cost. EMS got my order delivered in 5 days from being shipped. This chain link spare came in a nice DID packaging and was well presented. It came with multiple o-rings and a squish pack of white grease. You can never have enough of that anyway. The chain link is very well made as with all DID chains etc. A nice little stock up is what was needed and I am reassured that I now have spares in case I need them. Thanks Webike. View detail
Quantity with high grip tire because it works well.:Set Exchange is a Recommendation
It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.
The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)
I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Anyway, it's a cosmetic!
I don't know about durability, but I chose it for its cosmetic value. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Can't tell the difference between OEM and
I used it to replace the RearShoe on my commuting Motorcycle SUPER CUBja10.
The OEMs that had 21,000 km of use had used the TouchCUBs so close to the limit that the Touch was poor and the effectiveness of the Touch was very weak, but after replacing them with these Shoes, the effectiveness and Touch of the new car was restored.
View detail