Genuine Kitaco Exhaust Gaskets for SUPER CUB 50

These gaskets were purchase due to needing an exhaust change on the Super Cub 50 and I do not like reusing the old ones if at all possible. These Kitaco ones were reviewed well and so I decided to give these a try myself. The price for the gaskets was excellent and far better than buying the OEM ones which essentially do the same job anyway. I have used a few Kitaco parts before and they really are great quality. I did have some other parts in an order and everything arrived in 5 days from being shipped. The gaskets arrived in the Kiataco packaging and were spot on. No issues or problems and the specs were perfect too. Very pleased with this purchase. View detail

530-1010216

Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail

HA-1042

When servicing my friend's SUPER CUB CUSTOM, it turned out that his air filter had fallen into disrepair. Based on our experience, we ordered this filter and everything went fine. The filter is perfectly in place, the quality of the materials is as always on top. If you need a filter for such a motorcycle, I recommend buying it. View detail

Easy installation, no brightness problems.

Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness. View detail

Acceleration Up

15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed! View detail

WhiteLight and good looking!

It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light. View detail

Bright and low power consumption

I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling. View detail

C125 is the best choice

I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator View detail

It's always this

I always keep it as a spare. It's inexpensive, the quality is good, and it's a standard item. View detail

Genuine DID 420NZ3 Gold Spare Chain Link

I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail

Did not fit.

The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail

If you want to Tuning engine+NORMALAir cleaner!

Used for LITTLE CUB.
After standard light tuning such as 75cc bore up, high camshaft, carburetor replacement with PC20, connecting pipe replacement for CUB90, etc., NORMALA air cleaner seemed to be a little insufficient in air capacity.
Nevertheless, we wanted to use the NORMALAir cleanerBox as it is, and we did not want the intake noise to be loud without a filter, so we chose to replace the air filter inside with this product.

Installation was very easy and the procedure is exactly the same as replacing the OEM air filter!
This Sponge Filter certainly lets a lot more air through than the paper version of the NORMALAir Filter.

In addition, when connecting to the connecting pipe of the pre-regulation CUB90, the filter side connection port is a little large, so it could be connected without loosening by filling the gap with a thick gap-filling tape or the like. View detail

I put it on my RG 50Gamma.

It's just like changing a light bulb.
There is no problem View detail

KITACO Drive Sprocket (Front)

It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator View detail

Cosmetically good.

This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail

good stars

Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.

The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original.  It works clearly. ---------------------------------------------------------- The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly. The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly. Powered by Google Translator View detail

For normal use, there is no problem at all.

The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List. View detail

exchange

I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful. View detail

Rear Sprocket purchased with tooth count change

Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail

It looks better now.

I put it on because it stands out from the OEM. View detail