Reviews
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
FOR CB250F
reasonable price.Carburetor o rings. It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
Fits: HONDA NSF100 A, HONDA NX125 AC, HONDA XR100R A
FOR CB250F
reasonable price.Actually I could not find this item in my country (JET, MAIN (#90) 99101-GHB-0900). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail
Genuine Honda Rear Piston Seal Set for CB1000R 2011
These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail
Was good
I was able to use it without any problems. Good. View detail
Fits: HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA XL600V, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VT750, HONDA VT500FT, HONDA VT500FT, HONDA VT500FT, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500, HONDA VT500
Genuine Honda Spare Blank Key for XR650L
I had an issue with the ignition barrel and snapped the key in the process. After a lot of pushing and pulling the key decided to snap, my bad. So I did not have to go and buy a totally new set of locks, I had an old set hanging around and decided I would get the lock set cut with a new key, this is where the new blank key comes in.I could have just got some random generic key but as this is an essential part that needs to work every time,I went for the genuine Honda one. The part number was not particualrly hard to find and Webike had these available. Win, win. The price was very reasonable and better than could have sourced locally. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. All my parts were received in perfect condition. The key even came in a small Honda bag which was a nice touch. The key has a really good and solid feel to it. Although it is a blank, the edges are smoooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View detail
Fits: HONDA C125, HONDA C125, HONDA C125, HONDA C125, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA Z125M, HONDA C125, HONDA C125, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70, HONDA C70
Recommended replacement with Oil
[How is it used?
Every time the oil in the CUB is replaced, the washer is also replaced, so it is used frequently. I am satisfied with the replacement, but at the same time I can refresh my mood.
How was your experience with it?
It is preferable to use a torque wrench to tighten the washer to the proper torque.
How did it compare to other products?
I bought some washers with different part numbers for other Honda cars at the same time, but I can't say if they can be shared or not, because there may be slight differences in material etc. It would be better to use the one with the part number that fits to each vehicle.
[Points to note]
When tightening, it is best to work with a firm hand to get a feel for the tightening process.
View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA CR125R, HONDA NSR50R, HONDA CR500R A, HONDA CR500R A, HONDA CR500R A, HONDA CR500R A, HONDA CR500R A, HONDA CR500R A
exchange
The installed product was old, so I replaced it at the time of maintenance and cleaning. rubber systems inevitably deteriorate, so it's great that the OEM product is sold at a reasonable price. View detail
Fits: HONDA Z50RD, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R, HONDA Z50R
Replace with age!
[How is it used?
This is a replacement of a SteringTopBall with Stages due to age-related deterioration.
How was your experience with it?
Steering is now as light as new with no resistance!
How did it compare to other products?
No other company's products
[Points to note]
If you ride the car with staged parts, the worst that can happen is that the bearing will be damaged and you will not be able to drive the car.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
exchange
The parts that were outdated at the time of the overhaul of the front brake caliper are replaced.
Since it is a Rubber, it was deteriorated badly, so I replaced it with HondaOEM Product, which is the same as the installed product, but I thought the price was a little high.
View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F
exchange
The rubber cushion attached to the sub-bracket section had deteriorated and cracked badly, so it was replaced.
It was sold by HondaOEM Product, which was a great help.
View detail
Fits: HONDA VF750CD, HONDA VF750CD, HONDA VF750CD, HONDA VF750CD, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750
Replace with new one
Overhaul of RearBrake Caliper, purchased to replace with a new one when reassembling because the installed item was old at the time of cleaning.
It was sold by HondaOEM Parts and I was able to replace it with a new one.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
Replace with new one
Rear brake maintenance, disassembly for cleaning and reassembly, and replacement of the O-ring with a new one or else it may leak, so it is purchased and replaced.
It is helpful that the same products can be purchased at HondaOEM.
View detail
Fits: HONDA C125, HONDA C125, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Replace with new one
I purchase this caliper to replace it with a new one when I reassemble it, since I disassemble it for maintenance and overhaul of the rear caliper.
Material:Since it is a Rubber product, the installed parts were badly deteriorated and I was able to purchase the same parts at OEM Product and replace them with new ones.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
New installation
I purchased this caliper because I wanted to replace it with a new one when I disassemble and reassemble it for maintenance and cleaning of the rear caliper.
Material:Since it is a Rubber product, the installed product was old and deteriorated badly, so we were able to replace it with a new one.
View detail
Fits: HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA PCX150, HONDA PCX150, HONDA Z125M
Replace with new one
RearBrake CaliperMaintenance, disassembled for cleaning and replaced with a new one when reassembled.
Material by all means:It is a Rubber product, so it is very difficult to reassemble it unless it is replaced with a new one to prevent leakage when it is removed due to deterioration or deformation.
If you think the price is …, Quantity:2pc. It was in the Set.
View detail
Fits: HONDA CB1100F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR1000RR
exchange
Rear brake maintenance and replacement with a new one since the installed item was old, discolored, and rusted at the time of overhaul.
I was able to replace it with a new one, which is available at HondaOEM Parts and is not expensive.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000
Replace with new one
Maintenance of the RearBrake Caliper and replacement with a new one since the installed parts were out of date at the time of overhaul.
Since rubber systems inevitably deteriorate over time, it is helpful that new OEM products are available and can be purchased and replaced with new ones.
View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF450L, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
exchange
I was able to purchase a new OEM product, so that was a big help. View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
With Maintenance
Brake fluid was replaced, and when the hose was also replaced, the clamp was replaced with a new one because it was old, discolored, and rusted. View detail