Reviews
Fits: HONDA VT750C2B, HONDA VT750C2B, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750C2, HONDA VT750, HONDA VT750
Genuine Honda Switch Assembly for CB900F 2007
This was a part that appeared to be the cause of the non starting problem we had been facing with the CB900F 2007 bike. After extensive investigation, and changing a few other parts, this was the only part left to change. The part numbers were not hard to find by using the tools Webike provide and then cross referencing Honda schematics. Added to my order with a few other parts as well as the right hand side grip. All shipped with EMS and delivered in 5 days. The package was well padded and no damage. The switch arrived in the genuine Honda packet and was wrapped in bubble wrap for safety. The switch is nicely made, the only way to test is to install and before we put everything back together we tried it and it fixed the issue. Now the bike starts first time everytime. Very happy customer, great job Webike, thank you. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
I wonder if I can have a Stock.
[How is it used?
CRF125F was fully greased up one year after delivery. I put a lot of grease in when the car was new, so the bearings were in good condition, but two seals had died, so I bought new seals. I bought it because it is a pain in the ass to replace seals.
Was the one you received as per Image?
As per Image
Was the installation difficult?
After removing the old seal, insert the new one as far as you can by hand, and finally insert it in a socket that matches the size of the old seal. You can put in the new seal as far as you can, and then insert the new seal by hand. The other side is a good example, and the service manual has instructions on how to put it in.
How was your experience with it?
It will firmly prevent water and mud from entering.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Nothing in particular. If you are a CRF125F rider, you can use "Quantity".:2pc. I think it would be nice to have a Stock as much as Set.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Some vehicles seem to have oil seals that have been damaged during assembly since new. It is a good idea to pay attention to this.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400T
receipts
I bought this for storing and keeping my Gauge, Air Pretzel 89301-MN5-003, it's compact, easy to store and carry, not too expensive, HONDAOEM, with Logo. View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F
air pressure (of tires)
I bought it because I thought it would be convenient to check the air pressure of the Tire and to load it.
It looks Compact and nice, but in terms of selling price, I wish it were cheaper.
View detail
Fits: HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800FI, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA VFR800
Aging
I drive a 2009 JA07.
Since last year, the ball has been running out continuously and the socket is rattling Large, so it was replaced for the sake of replacement.
It's a pain in the ass to find a way to replace it.
Still, it seems easier than the recent CUB.
View detail
Fits: HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA CBR1100XX, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500, HONDA GL1500
Pc800
The radiator cap fits perfectly at the thermostat housing of de Honda pc800. I also fitted the thermostat and a new gasket. Thank you for selling oem parts. View detail
Fits: HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F
exchange
The overhaul of the rear brake master cylinder was old and rusted, so we replaced it with a new one that could be purchased new from the OEM.
It was helpful because the same HondaOEM Product is sold.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R
exchange
Overhaul of the rear brake master cylinder, the diaphragm was cracked during cleaning, so it was replaced.
It was helpful that the same product was sold by HondaOEM Product.
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100S, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB900F
exchange
Overhaul of the rear brake master cylinder, Clamp under the hose when cleaning, and the installed items were old and there was some apparent damage, so they were replaced.
It was helpful that the same product was sold by HondaOEM Product.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CB1100, HONDA CB1100
Overhaul
The Rear brake master was not working well and seemed to be sticking, so I purchased this for Overhaul, for Replacement.
Quantity:Set, but I don't think I need all of them, but I have no choice but to use the Quantity:I replaced the entire set. After the replacement, it works properly and the brake works.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100N, HONDA CB1100N, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
exchange
The parts that were outdated at the time of the overhaul of the front brake caliper are replaced.
Since it is a Rubber, it was deteriorated badly, so I replaced it with HondaOEM Product, which is the same as the installed product, but I thought the price was a little high.
View detail
Fits: HONDA VF750CD, HONDA VF750CD, HONDA VF750CD, HONDA VF750CD, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750C2, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750, HONDA VF750
Replace with new one
Overhaul of RearBrake Caliper, purchased to replace with a new one when reassembling because the installed item was old at the time of cleaning.
It was sold by HondaOEM Parts and I was able to replace it with a new one.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
Replace with new one
Rear brake maintenance, disassembly for cleaning and reassembly, and replacement of the O-ring with a new one or else it may leak, so it is purchased and replaced.
It is helpful that the same products can be purchased at HondaOEM.
View detail
Fits: HONDA C125, HONDA C125, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D
Replace with new one
I purchase this caliper to replace it with a new one when I reassemble it, since I disassemble it for maintenance and overhaul of the rear caliper.
Material:Since it is a Rubber product, the installed parts were badly deteriorated and I was able to purchase the same parts at OEM Product and replace them with new ones.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
New installation
I purchased this caliper because I wanted to replace it with a new one when I disassemble and reassemble it for maintenance and cleaning of the rear caliper.
Material:Since it is a Rubber product, the installed product was old and deteriorated badly, so we were able to replace it with a new one.
View detail
Fits: HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA PCX150, HONDA PCX150, HONDA Z125M
Replace with new one
RearBrake CaliperMaintenance, disassembled for cleaning and replaced with a new one when reassembled.
Material by all means:It is a Rubber product, so it is very difficult to reassemble it unless it is replaced with a new one to prevent leakage when it is removed due to deterioration or deformation.
If you think the price is …, Quantity:2pc. It was in the Set.
View detail
Fits: HONDA CB1100F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CBR1000RR
exchange
Rear brake maintenance and replacement with a new one since the installed item was old, discolored, and rusted at the time of overhaul.
I was able to replace it with a new one, which is available at HondaOEM Parts and is not expensive.
View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF1000, HONDA CRF1000
Replace with new one
Maintenance of the RearBrake Caliper and replacement with a new one since the installed parts were out of date at the time of overhaul.
Since rubber systems inevitably deteriorate over time, it is helpful that new OEM products are available and can be purchased and replaced with new ones.
View detail
Fits: HONDA CRF250R, HONDA CRF250R, HONDA CRF450L, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
exchange
I was able to purchase a new OEM product, so that was a big help. View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
With Maintenance
Brake fluid was replaced, and when the hose was also replaced, the clamp was replaced with a new one because it was old, discolored, and rusted. View detail