Better movement.

[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance. Whenever I buy a used car, I replace the stem bearings, not only to improve handling, but also to return the car to standard condition.

Was the one you received as per Image?
The usual HondaOEM Parts arrived. There is no doubt about it.

How was your experience with it?
The movement is still better.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Stem bearings should be replaced because everything moves better. Although it is a troublesome process, it is more effective. View detail

Refresh

[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.

Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.

How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning. View detail

Securely mounted.

[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.

Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.

How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.

[Included Parts:were they on?
Not particularly

[Was there anything that disappointed you?
Not particularly

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts. View detail

purchasing a spare part

When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product. View detail

For CB250F

Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

CB250F MUFLER PROTECTED RUBBER

This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

For CB250F

Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

CB250F MUFLER COLLAR

Genuine product - COLLAR， FR. FENDER 61104-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

CB250F MUFLER GASKETS

Genuine product -GASKET，EX. PIPE 18291-MN5-650 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail

Good part

Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail

Valve assy, air injection for Honda shadow 750

Good morning. The part arrived in its original packaging, fits perfectly, made of high-quality materials. The installation went smoothly without any issues. Everything is fine, as always 5/5. View detail

Cover for honda shadow 750 phantom

Good morning. The cover arrived in its original packaging and fits perfectly on the motorcycle. The rubber isn't cracked, indicating it's made of good material. There were no issues with the installation. View detail

FOR CB250F

Actually this item i could not found in my country (Emblem，Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail

FOR CB250F

Battery PROTECTION BAND. (BandB2，Battery 95012-13001). Finally I bought it from webike. It is authentic. Very good packaging. Fast shipping. Thanks to the webike team. It has not been installed yet. Highly recommended. View detail

Genuine Honda Rear Piston Seal Set for CB1000R 2011

These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail

CB250F

I am happy to work with the webike team.Actually this item i could not found in my country (Kyatsup 14MM 90084-MN8-010). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. It has not been installed yet.good for the genuine buyers.highly recomended. View detail

Fits and stable

I order new Honda OEM radiator cap with part number 19037-GEE-710 to replace for old radiator cap of Honda VFR 800 VTEC 2003. The old rubber that had aged is no longer closed, the new cap has fitted and stable. View detail

Rubber Shift Cover

placed an order for a replacement rubber for my shifter pedal. Arrived perfectly packaged and fitted very easily View detail

Genuine Honda Dust Seals for CBR500R 2018

This bike had an issue with a split dust seal for the rear wheel. Probably the cause of removing the rear wheel bearings and not seating correctly. Not too much of a problem and finding the correct seals was not hard at all. These seals do fit a lot of bikes and I do have some usually in stock but I ran out. I used the Webike help pages and then cross referenced with Honda schematics to make sure they were the same ones. The price Webike had these for was really good value and better than locally sourced. I did have a few other small parts in the basket so I just ordered them all together and this then saved some shipping costs too. EMS is who I use these days as they just get your order to yopu quickly. 5 days from shipping and the order arrived at my door. The small parts in the order were all packed really well and padded to stop any damage. These seals came in their own little Honda packets. I did order a few of them so I have some in for other bikes. The seals themselves are pretty supply but with the right amount of rigidity. They were well moulded and this is usually the case anyway from Honda OEM parts. Very pleased with the purchase and the bike rear wheel now has a good seal to kepp all the UK crap out. Thanks Webike. View detail

FOR CB250F

I have ordered 1 clamps and installed to my bike. now it's loking new. item included in webike box.packaging is very safe. thanks webike team.highly reomended. im happy to deal with webike. View detail