Reviews
![Gasket (583 Oil Pipe [9043000811]](https://img.webike-cdn.net/catalogue/images/91187/90430-08119_TS.jpg)
Used for TZr50R OilDrain washer
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This product is OilDrain washer.
Note that if this washer is ruined, it will lead to oil leakage.
How was your experience with it?
No oil leakage.
Gold amount is also, well, cheap.
How did it compare to other products?
I was going to use Other Brand Product, but I didn't know the size, so I bought OEM Product.
However, the one I received did not fit, and when I looked into it, I found that this product was applicable, so I selected it.
Isn't it originally for TZr50R?
[Points to note]
Note that once attached, it will be replaced the next time it is disassembled.
View detail
TZr50R Water pumpDrain washer
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This product is a Water pumpDrain washer.
Note that if this Copper Washer is ruined, it will lead to coolant leakage.
How was your experience with it?
The OEM parts have been used without any problems.
No coolant leakage.
How did it compare to other products?
No comparison can be made because there is no external company.
However, since it is also a regular Washer, it may be compatible with other moped etc. Parts.
[Points to note]
Note that once attached, it will be replaced the next time it is disassembled.
View detail
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
Fits: YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA YZ85, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA YZ85, YAMAHA SR400, YAMAHA SR400, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL, YAMAHA STRYKER BULLET COWL
OEM VALVE PACKING INSTALLATION
TW200 PETCOCK VALVE PACKING GASKET IS VERY HARD FIND THESEDAYS.So I ordered one from The Webike Shop.Valve Packing Installation process is very easy. First I had to remove all the fuel in the tank and removed the petcock from the tank .Older petcock valve gasket might need to replace cause sometime rubber material may worn out or cracked . mine still in a good shape but I got a brand new one inmy hand. to reach the older valve packing ,first unscrew the two phillips bolt that hold the valve in place. valve has a o-ring seal that fuel doesn't leak out .then the older valve packing. place a new valve packing and install the rest in an order .product price is so cheap.I ordered so many product from the WEBIKE store and never had a problem. Great Communication and Smooth Transaction.Highly Recommended .Webike Shop Beyond 5star View detail
Fits: YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85
Oil Seal Installation
According my odometer reading have ridden over 70000 kilometers on my 1987 Tdub. front wheel bearing and the front oil seal still in a good condition.I think it is good time to replace the front wheel oil seal.Seal. In wheel end applications are key in determining the life of the wheel. If the seal allows external contaminants to enter the bearing or lubricant to escape from the bearing, then premature failure of the wheel.seals are designed to keep your wheel bearing lubricant within the wheel end, and keep all debris, dirt, and other contaminants out while on the road.to replace the front wheel oil seal need to remove the front wheel first.Then remove the dust cover & the spacer .Can be easily removed the old oil seal using a flat screw driver or a seal puller.Inner brake hub bearing does not have a seal. Grease the edge of a new seal and drive it in on top of the outer bearing .I used same outer diameter socket to tap the new oil seal in liitle bit further.New seal will sit slightly below the surface of the front wheel flange..This is how I done it.Thanks webike for the support. View detail
Fits: YAMAHA GT80, YAMAHA GT80E, YAMAHA GT80F, YAMAHA XT250, YAMAHA XT250G, YAMAHA GT80G, YAMAHA XT250, YAMAHA XT250H, YAMAHA XT250J_198, YAMAHA XT250J, YAMAHA XT250K, YAMAHA XT250K, YAMAHA XT250L, YAMAHA XT250L, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA YSR50T, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA ENDURO
Very Nice OEM Oil PLUG
I replaced my Old Oil filler cap because It's too Old & Time has come to install a brand new OEM oil filler cap to my 1987 TW200 ENGINE.The oil filler cap seals the oil fill opening, which is where you pour the motor oil. My newer oil filler caps have "Yamalube " written on them .That's So Nice ,Reminder In other words, the oil filler cap is the cap you remove when adding fresh oil to the engine.This OEM Oil Filler cap has Long SERVICE LIFE.So we don't need to replaced it time to time.Another common site of leaking oil is the oil filler cap which covers the hole in the engine where oil is added.Pressure from the engine can put stress on the oil filler cap, causing oil to leak out, if the cap is broken, loose, or even missing.If you're not sure whether your filler cap is bad, it's a good idea to replace it anyway.There's no harm in investing in a new filler cap. It's better to spend a few dollars on a replacement filler cap than deal with a old filler cap.when I tightening it as tight as I can get it by hand .So turn it until it stops naturally, and then might be able to twist it another quarter of a turn until it properly sealed.( Don't forget to put O-ring In it).Once I Place a order at WEBIKE , THEY SHIPPED PACKAGE VERY QUICKLY TO THE DESTINATION COUNTRY. It is very convenient because the package arrives in Sri Lanka within two or three days after it is airlifted from Japan.Most of the time packages will arrive on time.This is why I choose WEBIKE EVERYTIME WHEN I need parts for my bike. It's SAFE & SIMPLE. It's bring me a joy when I see the '' WEBIKE'' LOGO ON THE BOX.THANKS WEBIKE !!! Good company, good product Have had a wonderful experience with This will be the perfect accent to my engine from them View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZ250, YAMAHA PW80, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA PW80, YAMAHA FZ1, YAMAHA FZ1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA PW80, YAMAHA YZF-R6, YAMAHA YZF-R6
GENUINE PRODUCT
little leaks can be annoying! Well, upon closer examination, my tw200 the shift shaft seal was leaking. that's just the lowest point of the case when the bike is on the side stand, so virtually any leak will drip off right there.To remove the worn out shift shaft oil seal I had to remove the gear shift lever & left side cover first .This can be done without draining the oil by laying the bike over on its right side. Be careful about leaking gas and/or battery acid if you do it this way..At that moment I didn't have any seal remover tool or seal pick, old oil seal isn't come easily SO I threaded two wood screw into the old shift shaft seal until seal was loose from the engine.I wrapped in elecrical tape on shift shaft ,prevent damaging the new seal when installed it.I always choose OEM oil seal bacause of the longevity .QUALITY IS WAY WAY HIGH NO NEED TO WORRY ABOUT IT. VERY WELL PACKED AND RECEIVED PACKAGE VERY QUICKLY.THANKS WEBIKE ! Webike Always give customers more than what they expect to get, shipping chargers and the products prices are very low. GREAT SHOP ! GREAT PRICE ! GREAT PEOPLE. HIGHLY RECOMMENDED ! View detail
Fits: YAMAHA YZ125, YAMAHA YZ85, YAMAHA YZ125, YAMAHA YZ85, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125G, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ85, YAMAHA YZ125X, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ85, YAMAHA YZ125, YAMAHA YZ85, YAMAHA YZ125, YAMAHA YZ85, YAMAHA YZ125, YAMAHA YZ85
OEM Oil seal
COUDN'T FIND OEM FACTORY OIL SEALS ANYWHERE ELSE. THE FINEST QUALITY OIL SEAL IS RIGHT HERE FOR YOUR BIKE.BEFORE PUT A NEW OIL SEAL NEED TO REMOVE THE RIGHT SIDE COVER CASE.I replaced this oil seal while I'm at clutch replacement job.to remove the old oil seal I used flat blade screwdriver & seal was easily came out from the crankcase cover.before I installing the new kick starter shaft oil seal I applied waterproof grease to the lips of the new seal drive it into place using deep socket that has same outside diameter as the seal..I already did it anbody should be able to do it.Good Luck ! View detail
Fits: YAMAHA MORPHOUS, YAMAHA MORPHOUS, YAMAHA MORPHOUS, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA ZUMA FX (YW50FXEL), YAMAHA ZUMA FX (YW50FXEB), YAMAHA ZUMA 50FX (YW50FXJS), YAMAHA ZUMA 50FX (YW50FXJR), YAMAHA ZUMA 50FX (YW50FXHS), YAMAHA ZUMA 50FX (YW50FXHR), YAMAHA ZUMA 50FX (YW50FXGW), YAMAHA ZUMA 50FX (YW50FXGS), YAMAHA ZUMA 50FX (YW50FXFW)
Yamaha OEM Cap, Radiator
Original radiator cap for Yamaha YZF R1. I have already replaced the cap in the radiator once. After the fall, my lid was deformed and antifreeze began to pass through. But after replacing the cover, the motorcycle began to function properly. More antifreeze does not pass. View detail