Bolt

The Right Side fixed bolt is replaced with a new one.
It seems to have been changed to the alternative part number:64508-ML7-010, but the tightening part is still ? shaped.
I would prefer a ?-tightened shape. View detail

exchange

Side cowl demountable bolt, replaced with a new one.
I would like to have a cross, but it seems that OEM new products are changing to -.
I hope they will change to Cross Type. View detail

Replace with new one

This is a replacement along with Bolt replacement.
It is like thin Packing, but Wound-proof? Prevention of loosening? It is not cheap. It is not cheap. View detail

Genuine Yamaha Bracket 13 for YZF-R1 2016

This bracket had clearly too some hit as it had snapped near to the engine side. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all toghether so I would get them all at the same time. In 5 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. SImple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. View detail

exchange

It was off for Screen fixation, so I am repurchasing a new one.
It is sold by HondaOEM Product, which is helpful. View detail

If it cracks, it is wise to replace it.

The other day I got carried away... and fell to my feet (laughs).
I tried to repair it, but gradually I started to hear a buzzing sound at high RPM, and I was worried that it would not be able to withstand the vibration, so I replaced it. 。
Left Side upper part.

This vehicle will be a Full Cowl vehicle.
What is Full Cowl?

It looks sporty and looks how fast it is, but what is Merit and Demerit?

[Merit]
◎High aerodynamic performance allows the car to efficiently catch the driving wind behind it when driving at high speeds or riding for long periods of time, reducing fatigue. 。

◎Styling-wise, Full CowlMachine has a Sporty Sporty Style and looks good. I→d prefer it, though (laughs).

◎Protect your body from precipitation and insects.
Since motorcycles are exposed to the rain, the Cowl reduces the area where the body gets wet somewhat. 。 It also protects me from flying insects and Garbage from the front.

◎Engine protection in the event of a fall.
If you fall down without cowl, you may injure the crankcase etc., and the cost of parts around the engine is quite expensive even if the engine is traumatized... This is the case with Racer and others.

[Demerit]
▲Sensitive to strong crosswinds.
Full Cowl is strong against wind from the front, but its weak point is crosswind 。 The cowl makes it more susceptible to crosswinds, which is not a problem for a sturdy vehicle like a tourer, but a light motorcycle is affected to a large extent.

Damage is Large 。 As long as you are riding a motorcycle, you can't avoid situations that are either large or small, such as minor wounds, collisions, and falls. 。 In that case, you will need to replace the damaged Cowl, and this repair cost quite a bit of money! 。 Repair costs vary depending on the type of Motorcycle, but are estimated to be several tens of thousands of yen.

Poor maintainability. Various parts are hidden in the cowl, so maintenance basically starts by removing the cowl. 。 Even changing the oil has to start with removing the cowl! 。 It is said to be Large sturdy once you get used to it, but it takes a long time to maintain because the Upper Cowl on the front of the Motorcycle needs to be attached and detached, as well as Mirror, Blinker, and other accessory parts.
→GSX-R125 does not require cowl removal for oil replacement.

The exchange can basically be done with Hexagonal Wrench and +Driver. 。 It's in my on-board tools (laughs).
Point:If only a part of the Left Side is to be replaced, all screws on the CowlLeft Side must be removed. 。
Since Cowl is connected One Side by One Side. 。
Be careful not to lose any of the many small parts such as bolts and screws.


good point
◎No more chattering sound in vibration.
◎ Parts cost is relatively low. → I was at a Motorcycle store before I bought this one. If you fall, Cowl is cheap, so you don't have to worry!" I've been told that...yes, that's true (laughs).
◎SEA BASS has a Parts List on its Home page, so you can order at the store if you take down the part numbers.

A bad point
?Cowl removal and attachment is troublesome.


Repair is only a stopgap measure, so I would like to recommend replacement if budget allows! 。
SEA BASS, a manufacturer, has a parts list on their homepage so that you don't have to purchase a separate parts list. I think they are conscientious.
The Image seems to be Hurdle high to take off and put on, but you will get used to it after a few times.
It feels good to replace it. View detail

If you do it slowly and carefully, you can do it beautifully!

Cowl replacement done recently.
Not only do we have to replace the Cowl, but we also have to apply the Sticker and Decal attached to the Cowl.
Actually, I failed once. (Laughs)
I would like to write based on my failures.

This is ?Seal→○ Decal.
What is the difference between Seal and Decal?
Seal]
。 Sticker then becomes a more solid Seal.
Decal
Seat is used to reproduce difficult handwritten logos by transferring them onto a model. After the printing and processing processes, the seal is ready for transfer.
Decal is used for motorcycles and cars because of their weather resistance.

If you are confident with your hands, you may be able to paste it as it is, but it is quite risky (laughs).
I would like to introduce a method called water pasting.

How to paste
■What to prepare ■
Mist spray ........ "Water paste" This is done in a manner called 。
It is a wet cloth and can be substituted, but use a misting sprayer as it is by far the most efficient! 。 What you have at home is fine. If you don't have it, buy it.
OK with 100s of them.

○Towel...Large amount of water is produced in water pasting 。 TowelQuantity:1 pc. may not be enough. If you are not sure, buy it! 。 This is also OK with 100 units.

Spatula ... used to remove air and water 。 Fingers can be substituted, but fingerprints will be lost. 。 A spatula will give you a clean finish and make the work faster. But if you try to remove air bubbles with a spatula, you may damage the decal that has been softened by water pasting.

How to paste
1) Degreasing. Remove oil from the surface to be applied with a neutral detergent, etc.
↓
(2) Spray water on both the exterior decal and the surface to be affixed.
↓
(3) Temporarily place and align Decal. (I'm not pushing it yet.)
↓
It is better to use a Towel or your finger to press down from the center to the outside to drain off the water. Worst case, you can reapply if there is still water on the surface (laugh).
↓
(5) Drying. Leave it to dry for 5 to 6 hours in summer, or until the next day in winter. 。 But in the meantime, please check the status of Decal from time to time! 。 Air bubbles may form during the process of moisture loss, or floating may occur if the glue is weak.
↓
(6) Gently peel off the protective Seat over the Decal.

The work itself is not difficult, but it should be done slowly and carefully, taking your time.

My failed Point.
Insufficient ? degreasing.
?I was worried about the air bubbles and overgrew it with the spatula.
→It's not easy, but if you want to get it done quickly, you'll make more mistakes, so take your time and do it right. View detail

For CB250F

Genuine Rubber, Stomper Cost performance and comparison with other products reasonable price, About shipping and packaging good packaging.Thanks to the webike team.highly recomended. View detail

Good part

Original Honda finishing piece, new. It has a beautiful appearance. Well-crafted, careful with the details. Reliable. It appears to have good durability. I recommend her. View detail

Screen Fixation

When the screen was removed and re-fixed, it was deformed and could not be reused, so a new screen was purchased and replaced. View detail

Everything's fine

Everything quickly and efficiently. Products packed very carefully, air foil in the box and products wrapped in bubble foil. I haven't installed it yet, but you can see that the product is of the highest quality. I recommend ------------------------------------------------- --------- Everything quickly and efficiently. Products packed very accurately, air foil in a box and products wrapped in bubble wrap. I haven't assembled yet, but you can see that the product of the highest quality. I recommend Powered by Google Translator View detail

Everything's fine

Everything quickly and efficiently. Products packed very carefully, air foil in the box and products wrapped in bubble foil. I haven't installed it yet, but you can see that the product is of the highest quality. I recommend ------------------------------------------------- --------- Everything quickly and efficiently. Products packed very accurately, air foil in a box and products wrapped in bubble wrap. I haven't assembled yet, but you can see that the product of the highest quality. I recommend Powered by Google Translator View detail

FOR CB250F

Actually this item i could not found in my country (Emblem，Production 86150-KPG-901). Finally I bought it from webike. It is genuine. Very good packaging.fast shipping. Thanks to the webike team. highly recomended. View detail

The installation is easy and fits

I lost right protector under cowling when I fell of my Suzuki Hayabusa, the heat from the engine blowing into my boot is hot. I order new Suzuki spare part OEM to reinstall. The installation is easy and fits. View detail

Genuine Yamaha Front Stay for MT10

Ok so this was a bit of an error on my behalf as I did not stop in time when someone brole suddenly in front of me. Not reaaly any bad bump but enough to break the stay on the bike. I did inspect this thoroughly and there was actually 2 breaks to the stay. I am unsure if the part was already faulty or not but anyway, this needed to be replaced as soon as possible. Finding the corret part was not difficult at all as Yamaha schematics show the part you need and aslo, you can check the help pages Webike provide too. The part was a little expensive but for what it would cost locally, this was a bargain. I did have a couple of other smaller parts that I also needed for the bike and got them all shipped together with EMS. I choose EMS as they just get the orders shipped and delivered quickly. My order arrived in 5 days from shipping. The box everything came in was well packaged and the stay itself also came in the standard Yamaha box. The stay was perfect upon arrival and there was no damage. It is a really intricate piece of kit. The joints are all good and feel pretty sturdy. The finish is a nice satin black smoothed out paint. Although you cannot see this part oncve fitted, it was nice to see that yamaha actually took the time and care to make the paint finish really good. Fitting was not too bad, it is all the putting the rest of the bike back together that is the annoying part. Very pleased with the purchase. Thank you Webike for the care with my parts View detail

Rear FenderRubber

Rear Fender's RubberSeat Stopper was lost, 1pc. was not attached, so it was purchased and installed.
It was helpful that the same item was sold by HondaOEM Product. View detail

Rubber under Seat

The Rubber stopper under the Seat was out of date, so we repurchased it.
It is helpful that the same product is sold by HondaOEM Product.
I thought about replacing all of them, but they are not that cheap, so I will replace only 1 pc. this time. View detail

Puas sekali dengan pelayanannya, barang memang benar2 original, sabar menunggu karena barang memang dikirim dari negara tetangga, part2 built up cukup lengkap di sini. Dan saya ingin mengusulkan yaitu parts untuk Honda Nice 125 segera disediakan View detail

Puas sekali dengan pelayanannya, barang memang benar2 original, sabar menunggu karena barang memang dikirim dari negara tetangga, part2 built up cukup lengkap di sini. Dan saya ingin mengusulkan yaitu parts untuk Honda Nice 125 segera disediakan View detail

Genuine Yamaha Bracket 4 for YZF-R1 2008

One of the most annoying things to me is parts that have been badly treated and bikes the same. This bike, although not too old was in a sorry stae and needed some tlc. This bracket 4 was damaged and needed to be replaced. The part was easy to find using the methods I usually use, Webike help section and cross referencing Yamaha schematics. The price for this brack and another part for the bike was really good and better than I could source locally. Although, saying that, this part was actually not available at the time I needed it locally. I had my order shipped using EMS and all the parts arrived promptly in 5 days from shipping. The bracket is well made and the welds are very clean and precise. The bracket is painted in a nice satin black which looks nice. A nice and easy swap out and the bike is better than it was. Thanks Webike. View detail