Reviews
Oil level gauge O-ring
I was looking for a good replacement, so I bought it.
The OEM Product is inexpensive, so it is sufficient.
View detail
Fits: Others Universal, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUBC125, HONDA CROSS CUB50, HONDA BENLY50, HONDA BENLY50110, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA LEAD50, HONDA LEAD 90, HONDA LEAD 100, HONDA LEAD110, HONDA LEADEX, HONDA APE 50, HONDA APE 100, HONDA DIOCesta, HONDA XR50 MOTARD, HONDA XR100MOTARD
Exactly to MONKEYGROM
It is Exactly for 125cc Minimoto. It is thick, waterproof, and will not fade. It is quick to hang, and the center clip prevents flapping, even in strong winds.
The holes for locks on the front and back are also well and not frayed.
The black color is inconspicuous at night and plays a role in security.
View detail
I can last three years
In 3 years, the Black will fade and become White, and it will catch and become ragged.
It needs to be replaced periodically.
Exhaust Guard is included in the price.
View detail
Fits: HONDA DIO110, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA Lead EX
Highly Control
OEM comparison,
Braking power obviously changes.
Touch on Brake lever is surprisingly Mild.
Wear and tear is a little fast.
Aggressiveness of disc is normal. disc replaced at 60,000 km.
The Red Pad is almost identical to the OEM and ends up being about half as durable as the OEM, so the Golden Pad is better as a result.
Braking power should be the first priority because it is more problematic not to stop at a dangerous SCENE.
If you want to replace it at a store, you will have to pay a labor charge. If you buy a Red Pad, which has only about half the life span of a Golden Pad, because it is cheaper, the resulting two-time labor charge will be the same as for a Golden Pad.
In conclusion, Golden Pad has high braking power and good cost performance.
View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
For CB250F
Genuine product Spark (CR9E 98059-59916) Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
FOR CB250F
It's realy genuine and reasonable price.Spark (CR9E 98059-59916). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail
Genuine Honda Rear Piston Seal Set for CB1000R 2011
These was a set of replacements for a broken piston seals for the CB1000R I have in the garage. I found that a few of the seals were not in great condition but these ones actually split and deteriorated. I purchased a set so I now have spares if any are still ok already on the bike. I found the correct part using the help pages and links that Webike provide. All with some other parts were shipped and delivered to my door in 5 days. These are small seals and do need a little care when being shipped. No problem at all for Webike, they put them in a nice bubblewrap envelope and were already on the Genuine Honda packet anyway. They were kept flat so there was no damage to the seals. As I already had the caliper apart for servicing, this set of seals were super easy to install. They arrived in perfect condition and had enough flex to be able to seat correctly. All back together and now that is one of the jobs completed. Thanks Webike, great work. View detail
Fits and stable
I order new Honda OEM radiator cap with part number 19037-GEE-710 to replace for old radiator cap of Honda VFR 800 VTEC 2003. The old rubber that had aged is no longer closed, the new cap has fitted and stable. View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
Fits: SUZUKI K50, SUZUKI K80, SUZUKI Birdie90, HONDA SUPER CUB 90, HONDA SUPER CUB 50, SUZUKI Birdie80, HONDA BENLY PRO, YAMAHA Axis Treat, YAMAHA YSR80, YAMAHA AXIS 90, YAMAHA YSR50, YAMAHA VOX, YAMAHA YB50, YAMAHA V80MATE80, YAMAHA V80MATE50, YAMAHA TZ80, YAMAHA TDR80, YAMAHA TZ50, YAMAHA TDR50, YAMAHA FZ50
I wanted a camouflage Motorcycle Cover.
[How is it used?
Used for KSR-II.
It is kept in Garage, but the reality is that it is not a fashionable thing called Garage. Garage and workshop. It is reasonable to say that dust and dirt are falling on motorcycles that have not been ridden for a while....
I purchased the Motorcycle Cover to improve the current situation where the first thing I do when I start to ride my motorcycle, which is supposed to be kept indoors, is to wash it.
Did you receive the item as per the Image?
I have purchased 3L/4L Size and L Size of this product in the past, and they have been used on SV650, SEROW, LITTLE CUB, etc., respectively, and have been very useful. I usually buy 1~2Size Large size body cover, but this time, I bought a 3L/4L Size and L Size body cover, which are listed on the back side of the box. Size appropriate for KSR-II." I purchased the M Size which is
I personally like camouflage patterns, so I searched all over Webike for this product and chose it.
How did you like it?
The reason why I had purchased the Large size is that I had been using it for a vehicle with a Rear box and a front basket. Bare bones. I purchased the M Size as specified for the proper size because it is used for a vehicle with a
when covered with Just fit." I will probably buy the M size again next time because I don't plan to do any more customization or rear box installation, etc. on this vehicle.
As I mentioned above, I use it for vehicles stored in Garage, but the fabric is thin, so I feel that the durability and weather resistance are a bit stiff if the vehicle is stored in the sun, such as on a bicycle parking lot.
[Points to note]
It is a thin fabric, labeled 100% Polyester, so you may want to consider replacing it after around one year if used outdoors.
Also, when the Engine or Exhaust System is hot, it is stated that it should be used only after the system has cooled down sufficiently.
How did it compare to other products?
Camouflage-colored body covers used to be sold by several companies, but recently they have become scarce, perhaps due to lack of demand.
Among them, Mr. Uniker has Green Light camouflage and Color:I can only be thankful that they have S Size to 8L for each of the two color variations of Gray camouflage.
Other items that would be helpful
Point and hang of installation
Not for use on vehicles at high temperatures.
Since the Motorcycle Cover is not strongly appealing to durability and weather resistance for its price, it may last a little longer if it is stored indoors or in the shade when not in use to avoid unnecessary ultraviolet rays.
similar to the above Heat resistant, durable, weather resistant If you are looking for a more expensive Body cover, consider a more expensive Body cover.
[ITEMS TO BUY TOGETHER
If theft prevention is also a consideration, purchase a strong Motorcycle locketc. to enhance theft protection.
[Opinions and requests to Manufacturer
We would be very grateful for two different color variations, but we would also appreciate it if you could add sand camouflage pattern, marine camouflage pattern, etc. to the lineup to make the garage even more colorful.
View detail
Fits: HONDA NHX110 A, HONDA NHX110 A0
Genuine Honda Switch unit, Starter for LEAD 110
One if the main issues with this bike that came in for the service apart from thebrakes and air filter was also the start switch unit. No idea how it happened but the old one got hit by something it should not have done and did not work. On closer inspection the terminals were really badly burned out too so a new one was needed. No problem, I found the correct part by using the tools Webike provide and then cross referencing via Hoinda schematics. The switch was a not costly but it really could not be done any other way, OEM was definitely needed. With the other parts I had them all shipped together via EMS as they get my orders to me very fast and they are super reliable too. The switch came in the usual Honda packaging and was also wrapped in bubble wrap for safety. Not really much I can say about the quality of this switch, it just works and that is all that counts. There is a nice smooth action and no problems fitting. The bike does now start without the need to bump it. Happy days. Thanks Webike. View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Fits: HONDA Lead EX, HONDA ZOOMER, HONDA ZOOMER X, HONDA PCX, HONDA PCX150, HONDA LEAD125, HONDA DIO110
It can be used normally
Pad was getting low, so I replaced it.
It's not particularly faulty or ineffective.
View detail
Product # 25602
This time we needed grips for the "Suzuki Birdie". Once again, the grips from "Hunter" did not disappoint. Everything fits perfectly, the workmanship and material are top notch as always. I am very glad! View detail
Fits: YAMAHA Cygnus 125X SR, YAMAHA Cygnus 125X, YAMAHA Cygnus 125, YAMAHA Grand Axis, YAMAHA Axis Street, YAMAHA Axis 90, SYM RV180JP, SYM RV125JP, SUZUKI Vexter 150., SUZUKI Address V125S, SUZUKI Address V125G, SUZUKI address V125, SUZUKI Address V100, PIAGGIO Runner 200VXR, KYMCO XCITING250, KYMCO GRAND DINK250Z, HONDA Lead 50, HONDA Lead 90, HONDA Lead EX, HONDA Lead 110.
Used with CROSS CUB50
CROSS CUB50 with 40? box and Size is just.
The quality is, well, in line with the price, and I have no complaints.
Easy to use with no Floppy with cords and ties to hem.
View detail
Fits: HONDA Lead EX, HONDA PCX150, HONDA PCX, HONDA ZOOMER X, HONDA ZOOMER, HONDA DIO110, HONDA LEAD125
Pad replacement
Pad replacement for LEAD125.
I ran it for a bit and it looks fine.
View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail