Reviews
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
Good product
Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail
RCH-01
The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Brake to JackKnife if you apply it strongly ".
This was the first time for me to use the Metal pad, but I have the impression that it works harder than the previous Golden pad.
I grabbed Lever with my usual BrakePoint and it worked so well that I JackKnife'd it unexpectedly.
We are still waiting to confirm the durability of the product, but as for the effectiveness, we are satisfied with it.
View detail
It was EXACTLY!
I purchased this to replace an OEM Oil cap groove that was broken.
It was Exactly in JA10!
View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
I installed it in the CB 750
I have been replacing the Oil Filter every two Oil changes because it is air-cooled and has been for years and I want to drive it for a long time. Installation is easy. View detail
As expected of DAYTONA
Was the installation difficult?
pimping
How was your experience with it?
It's going to look different
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Posh indicator lenses
Very well packaged and very good quality lenses. The lenses took five minutes to fit and look great they are not too dark and you can see the orange bulb when illuminated View detail
It was a darker Bronze color than the picture.
I fell 200 times rolling over on 2 Ding Down.
I thought it was Gold in the picture, but it was actually a Bronze color.
View detail
It got brighter.
I purchased this because Light was dark.
It brightened up as expected!
View detail
Parenthesis good & easy to slip through
Mirror like insect antennae of Ninja1000sx when slipping through,
It seems to hit the car's expensive Side-view mirror and is in the way.
Replaced within a week of buying Motorcycle.
Up and down Quantity:Pair (for Left and Right) The camera can be moved to a wide angle, so it is good to have flexibility. wide angle.
However, is it Reduction in cost or Bolt is all Color:Unpainted…
I painted it Black because it floats around from Body.
It's a little hard to see, but Parenthesis is better, and overall I am satisfied.
PS:I'm surprised that Motorcycle with Cowl these days is not mommy to Mirror exchange too!
View detail
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
high quality
Motorcycle Cover is hung in two layers. This product is used on the inside because it seems to be a fabric that will not Wound the vehicle body. It seems to rub in high winds, which may affect the paint somewhat.
When I used Single Body before, bird droppings were difficult to remove because they got into the gaps between the fabrics.
I replace them when they start to powder. This time, the Large seems to be durable even after 2 years. The included Mirror cover is a good protection against powder.
The anti-slap strap tends to get caught in the gap between the brake pedal and the pedal, so depending on the car model, it may be better to be careful when removing it.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used on the outside Cover
The Motorcycle Cover is used in two layers and is used on the outside.
It is water-repellent and waterproof, so even bird droppings and pollen can be washed off.
I am not concerned about the flapping that other users have pointed out, as it seems to be sized just right by the Cover used inside.
It is durable enough to be replaced in two years.
View detail
Dress-up in a casual way
It can be dressed up casually.
I am satisfied with the quality of the product.
It would be better if it were a little cheaper.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: HONDA CBR600F, HONDA CBR400RR, HONDA CB750, HONDA CB400SF, SUZUKI IMPULSE400S, SUZUKI IMPULSE400, SUZUKI RF400RV, SUZUKI GSF750, SUZUKI RF400R
Match CB1100 Fork with Initial ModelABS.
[How is it used?
The normal fork of CB1100 except RS has a caliper pitch of 62mm and 80mm. This item is for CB750 (RC42 ) It corresponds to 80mmPitch as well as etc.
The caliper side is compatible with bremboAxialCaliper 40mm.
Was the one you received as per Image?
The product seems to be Active and is working well with no accuracy or quality issues.
Was the installation difficult?
It is a Bolt On, so it is easy to install. In my case, there was a slight interference between the Caliper and the disc mounting Bolt base of the Wheel, but I was able to get it out by shifting it slightly.
How was your experience with it?
Since the Caliper position is at the top compared to the Fork of the 62mmPitch, it can go without the Hose extension. It also looks more natural.
[Included Parts:were they on?
In addition to the Instruction Manual, Bolt and Shim are included.
[Was there anything that disappointed you?
The quality of the product is not particularly problematic, but the high price is disappointing.
The recent price increase due to price revisions has made it even more expensive.
The same manufacturer's support with a 62mm pitch is often available, but the 80mm pitch one here may be special and is not available at all in the second-hand market.
View detail
At the same time as replacing the Tire.
[How is it used?
I bought a used VTR1000SP-2, it had a 10 year old Tire on it and I didn't want it to die so I replaced the Tire. I replaced the Hub damper at the same time because I had to remove the Rear wheel anyway, and I don't always know if or when the Rubber parts come out, and I don't know when the Rubber parts that are on it now have been replaced. I have replaced the Hub damper on the body I bought used with a new one for some reason. I guess it is a ritual in my mind.
Was the one you received as per Image?
The usual HondaOEM Parts arrived. There is no doubt about it.
Was the installation difficult?
Simply snap it in. Easy Refresh.
How was your experience with it?
Shock has been reduced. It will be good for the vehicle body.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be a good idea to replace them periodically as it will reduce Shock during Shift and when putting into 1st gear at stoplights.
View detail