Reviews
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
It works without any problems.
Replaced at the same time as Chain.
After the replacement, I do not notice any change, but it seems to be working fine.
View detail
Genuine Yamaha Circlip for FZ6R 2014
As with when ever I change out bearings regardless of where, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the perimeters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part and that was the finish of the main bearing in the transmission replacement. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View detail
Genuine Yamaha Transmission Oil Seal for FZ6R 2014
Whilst I was fixing the faulty bearing in the transmission I always change the circlip and oil seal as this is regularly deformed during removal. No point in trying to put a bad old part on a newly fixed bearing or you are going to have all kinds of issues in the future which will undo all your good work. Finding the right oil seal was straight forward using the tools Webike provide and cross referencing with Yamaha schematics. The price is really good value and along with some other parts for this bike, the shipping was good value too. EMS is my chosen courier and my order arrived swiftly in 5 days from being shipped. The oil seal came in the standard Yamaha packet and was inside a bubble wrap envelope for security. The oil seal itself is not really much to look at but you can see the quality is there from the off. There are no strange rubber extras attached as you see in some seals. It has a good amount of flexibility. But sturdy enough not to just rip upon install. After the overhaul of the main transmission bearing, this was a straight swap out. Thanks Webike, very pleased. View detail
Suitable for highways, sluggish in town
The front sprocket does not loosen unless the Impact wrench is turned at the maximum Large Power to install it. From the next time, it can be turned manually.
Also, if you do not take the Bracket on the Cover of the Sprocket, the Cover will not be attached.
The Metropolitan Expressway and the Tomei Expressway are not different.
The start of the road down the road is sluggish and doesn't fit.
(Normally, up to 16T would be good.)
Quantity assuming Fuji Speed way:Set, so will try in April.
On the other hand, we plan to try 14T in Tsukuba and other areas.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
It is very good as a substitute for genuine product.
I bought them because I wanted slightly better brake pads as a replacement for the original ones. As a result, it did not have better braking ability than the original. However, if you use it as a replacement for the original product at a low price, it will be an appropriate alternative and not inferior to the original product.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Genuine Gilles Tooling Engine Oil Filler Cap
This was also another one of the aftermarket accessories I had been meaning to get. This was the Gilles Tooling Engine Oil Filler Cap. Like my previous Gilles purchase, this was found to be in the sale so I grabbed the chance and added to the basket. It was not too hard to find the right cap for my oil filler but I did have to use Gilles Tooling website for that information. No bother really. With the other parts in my order, I got them all shipped by using EMS and they always get my orders to me fast. This was no exception, 5 days from being shipped from Webike warehouse and my order was at my door. Everything was very well packaged and kept safe with a lot of bubble wrap which pleases me. The filler cap came in it's own Gilles box and was already well protected. The cap itself is a well machined part and just like the reservoir cap, it has super smooth threads and a set of 3 coloured rings you can choose which colour suits your bike best. As before, choose well as you will not be getting the coloured ring out once you have it place without making a mess of the ring and the cap. With this cap and thre reservoir cap fitted it just ties in the Gilles stuff which is nice. The bike looks very sweet now and I am one very happy customer. Thank you Webike.n View detail
Genuine Yamaha Front Brake Pad Kit for FZ6 2005
The Yamaha FZ6 2005 came in for brake pad change and for this reason, as this has already had many pad changes, the customer wanted to keep it standar and stay with the OEM set up for both front and rear pads. Finding the right parts for the job was not tricky as I use Webike help pages and cross reference with Yamaha schematics to make doubly sure. These pads were pretty good value for OEM ones and less than could be sourced locally. I usually have a few other parts ready to ship so this keeps the cost of shipping down. As this was part of a larger brake pad order the price was right. My order arrived via EMS in 5 days from shipping which you simply cannot argue about. My order was well packaged and the pads also came in the standar Yamaha plastic pack. The pads are not really anything special but due to the extreme speeds these bikes can reach, they are surely up for the task. Fitting was easy as the calipers were all ready to accept the pads. One less job, now on to the rears of this bike. Thanks Webike. View detail
Controlability
Before the replacement, there was rust on the surface (especially on the back side), and it did not work comfortably when I stepped on it, and there was a strange noise, but after the replacement, the noise disappeared and it works well and is easy to control. View detail
Genuine Yamaha Piston (STD) for FZ6
This was the second part of the piston and rings rebuild for the FZ6. The piston was damaged on one cylinder so I also purchased a new set of rings for this too. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. This piston was really good value and better in price than my local Yamaha dealer could beat. I had a few parts for this rebuild to ship so got them all together. I used EMS and all arrived in perfect condition in 5 days from shipping. The piston arrived in it's own little Honda box and was in tact and as I expected. There is no burns no marks and is basically just ready for reassembly for the big job in hand. The fitting was not hard, it is the rest of the rebuild that was a pain to do. Got it done pretty easily and was happy with the return of good compression to that cylinder. Now the bike runs a lot better. Thank you for your continued efforts in getting my parts as fast as possible and packing everything perfectly. View detail
Need to be a little creative with Screwdome.
I bought it because there were few other options and I thought it would be better to buy it than to use it by trial and error and have more unnecessary parts.
The bracket for the Right Side is included, but when installed as per the screw holes, the pressure applied to the Fender feels unreasonable, so the existing holes in the bracket need to be widened with a drill or newly drilled to shift the fixing position with the Swing Arm.
Since the two holes on the Fender side do not match at the same time, only one hole was used and the unused hole was filled with black SiliconPate. However, it only takes 20 minutes to adjust the holes on the mounting bracket.
Item number as for FZS600 07214." When 07227. but if it is FZ400 compatible, 5DM series (Fazer 600 1998-2001) of 07214." becomes. 07227. is a 5RT system.
View detail
OEM equivalent in both reliability and price
[How is it used?
*Evaluated after replacement and only one run for Campaign purposes (https://www.webike.net/special/campaign/brembo_serieoro/)
Only rear. use
211 km from December 30, 2023 to January 8, 2024, from urban driving to some mountain passes (National Highway 299 Hanno - Chichibu) and highways.
Brake Disc:SUNSTAR ER-033 (https://www.webike.net/sd/24143238/)
Brake fluid:ACTIVE DOT-04 Green (https://www.webike.net/sd/20443936/)
Brake hose and others:GOODRIDGE (https://www.webike.net/tab/parts/br/268/)
Was the one you received as per Image?
The product is exactly as shown in the image.
Although there is no package image, it was packaged in a Plastic package, which is often seen in Vesrah and other products.
The Red Coating-like substance was more slippery than I had imagined.
The Red part of the product is as shown in the product image, so it is natural that the Red part was claimed as shown in the Image even when it was installed in the vehicle.
Was the installation difficult?
The shape is exactly the same as the OEM, and the shim, bracket, and installation are all easy.
Red coating is applied except for the ground surface of the Brake Disc, and I feel that the silicon grease has been extended well.
Unlike Vesrah, the back surface is not textured by coating, so I thought it was easy to clean with parts cleaner.
How was your experience with it?
*Experience Brake Pads:OEM, Vesrah VD-174JL (https://www.webike.net/sd/20460287/)
We could not perceive any difference compared to OEM or Vesrah, although we believe we also got a bite during the run.
When only Rear was intentionally applied, the speed adjustment was well done, and I did not feel any discomfort.
The product is at least not problematic to use from the above and seems to have enough performance to be used quickly and easily.
I don't think any dragging has occurred.
Circuit is rarely visited, so I think it fits the usage of this product, which claims to be a general road Main.
[Included Parts:were they on?
Translation (please type here) was included with the paper Instruction Manual, which did not include any translation at all.
Even though he could not read the Instruction Manual, he assumed that the chamfering, grease, and installation were the same as OEM because the shape is the same as OEM.
[Was there anything that disappointed you?
Not for products
The product description on Webike incorrectly stated that anti-counterfeiting was included, but this product was not covered.
https://www.brembo.com/jp/company/news/brembo-app-that-checks-if-products-are-original-or-not
[Notes]
As you can see in the product image, the brake pads are bright red and the part that can be seen from Caliper when installed is also red. They may not be recommended for those who care about the color.
Price difference from OEM
The price of this product is a little higher than that of OEM Brake Pads (5,830 yen) at the time of writing (6,380 yen). However, the price will be reversed by discount and Point reduction.
While OEM parts have a different level of reliability, this is a product of a well-known manufacturer whose name is often mentioned when people talk about "brakes," even though it is in the same price range as OEM parts. Although the color may be a little different for some people and vehicles, it has the performance to be used without discomfort after pad replacement, so it is likely to be one of the top choices when replacing consumable parts.
View detail
I used this brake pad on my MT-25 with brake caliper yamaha R6. This brakepad is wholesome, it's very controllable and predictable. I can modulate the braking very well View detail
I used it on my MT-25 with R6 caliper. Braking perfomance is wholesome, very controllable. Biting point is predictable and its gets better when hot. View detail
Replaced at the same time as bremboDisc Rotor
Replaced together with bremboDisc Rotor.
It stops cleanly and has no control issues.
However, when you put it on, you can't tell it's brembo by its appearance.
View detail
I knew this was easy to use.
The fabric is thicker and has some stiffness compared to the Simple made by DAYTONA, which I bought last time, but I prefer this one because it feels more protective.
It is easier to have a belt sewn to the cover to prevent it from being rolled up.
The size is a little bit oversized around the rear, but I think the 3L size is good because it can wrap around the entire motorcycle.
View detail