Reviews
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Genuine Yamaha Circlip for FZ6R 2014
As with when ever I change out bearings regardless of where, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the perimeters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part and that was the finish of the main bearing in the transmission replacement. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View detail
Genuine Yamaha Transmission Oil Seal for FZ6R 2014
Whilst I was fixing the faulty bearing in the transmission I always change the circlip and oil seal as this is regularly deformed during removal. No point in trying to put a bad old part on a newly fixed bearing or you are going to have all kinds of issues in the future which will undo all your good work. Finding the right oil seal was straight forward using the tools Webike provide and cross referencing with Yamaha schematics. The price is really good value and along with some other parts for this bike, the shipping was good value too. EMS is my chosen courier and my order arrived swiftly in 5 days from being shipped. The oil seal came in the standard Yamaha packet and was inside a bubble wrap envelope for security. The oil seal itself is not really much to look at but you can see the quality is there from the off. There are no strange rubber extras attached as you see in some seals. It has a good amount of flexibility. But sturdy enough not to just rip upon install. After the overhaul of the main transmission bearing, this was a straight swap out. Thanks Webike, very pleased. View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Genuine SBS Rear Brake Pads for Yamaha FZ8
This was a set that I needed to replace the ones I previously had in the bike. I wanted to try and match the rears with the fronts I was purchasing at the same time but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper. I used the tools Webike provide and then cross referenced with Yamaha and SBS websites for my own peace of mind. I had a few other parts in my order including the SBS front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a shrink wrapped SBS packet and also Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail
Genuine SBS Front Brake Pads for Yamaha FZ8
These were the front pads for the FZ8 and I wanted to try the SBS brand to see how they faired against other brands. Finding the correct pads was not super hard at all. I just went on SBS website and put my make and model in and the options were clear to see. I opted for these street excel sintered as they are pretty agressive pads and should work a treat. The cost was really good value and along with the rear pads for this bike already in my basket, I got them all shipped together with a couple of other small parts. Doing it this way, save a few pounds on shipping too. I use EMS as they just get my orders to me fast and efficiently. 5 days from shipping is all it took which is amazing. The pads and all the rest of my order was packed really well and any empty space was filled with bubble wrap for security of the parts. The front pads came in teh shrink wrapped SBS packet. There was no sign of contaminants or brake dust like you get in some ohter brands. The pads have a very coarse sintered material and hopefully will not take too long to bed in. Fitting in no time as I already had the calipers off and ready to go. Next time out, I will be testing these and edit my review. Great job Webike, thank you. View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Produk original dari Brembo. Sangat suka dengan kampas rem ini. Dengan harga yang relatif ekonomis dibandingkan kampas rem lainnya, performanya sangat baik untuk berkendara sehari-hari maupun berkendara di sirkuit (Trackday). View detail
Used to convert brembo Floating Disc to semiFloating
Used to rebuild a Large old brembo Casting IronRACINGdisc.
But to begin with, RACINGdiscs made by brembo are supposed to be non-disassembled and disposable, so you are entirely on your own when you replace the pins.
Since these are life-threatening and extremely important parts, we cannot afford to be lax in our work.
If you are not at all confident, you should not work on it yourself.
No kidding, if you fail, you usually die.
Replacement begins by disassembling the pins that are fixed in place with resin to prevent disassembly.
It is not to be reused, but be careful…… not to get Wound in the Disc or Inner.
The RACINGdisc of brembo is Full floating so that it works Pushingja Pushingja.
Hence, you can get excellent Touch when it is new, but at the cost of immediate rattling.
If rattling occurs, the original touch cannot be obtained (judder may occur in the hard brake), so it is a recommendation to replace this pin with a semi-floating one before this happens, preferably from the time the pin is new.
If you are a serious racer, you can use the disc as a consumable to be replaced in a very short time, but it won't last 3000km on public roads…….
I can't afford 80,000 yen for every 3,000 km, so I have to get ahead of myself!
In this case, we used it to recondition an old Casting Irondisc, and a used disc that had already been rattled and reduced after years of use on public roads.
The purpose is to semi-float the disc that has already exceeded its wear limit and should not be used, and to bring it into a state where it can be used at its limit.
However, the result was a Large success.
We were able to semi-fix the DISC, which could have been damaged anytime by the Pin moving with a clatter, and make it ready for use.
Technically speaking, this repair is a comedy repair, since it is completely useless, but since it was able to restore the level to a level where I don't feel any problems while driving normally, it is good this time.
However, since it is a dub Lupinchi that disassembles a non-disassembled part and semi-fixes the receiving part of the Pin that is originally worn to the Out Level to deceive, it is all your own responsibility no matter what happens.
I am helped by the Pin performance with great accuracy.
Conversely, Pin's accuracy is excellent and the surface finish, etc. is perfect.
PinBody, Wave washer, Washer receiver, and E-Clip are Quantities:Set, so there is no need to buy anything else.
View detail
Genuine Yamaha Clamp for YZF-R1 2007
I don't usually buy these OEM as parts as they are just tie wraps essentially but the customer wanted all standard so this is what they wanted. Finding the correct clamp was not hard as I search Webike help section and use Yamaha schematics to cross reference. A few other part in my order for this bike and shipped via EMS. I get me orders using EMS in 5 days which I assume is a standard of theirs as that is the timeframe I always work with. Very well packaged products and no damage in transit. The also came in the regular Yamaha packet. The clamp is a good part but again, nothing too special. Works exactly as it should so there are no complaints. Cheap part, oem standard, very pleased. Thanks Webike. View detail
Genuine Yamaha O-Ring for water pump for YZFR1 2003
Genuine Yamaha O-Ring for water pump for YZFR1 2003 This O-Ring also needed replacing for the water pump on the YZFR1. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o-ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in the box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an o-ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o-rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted easily and I hope the rest goes together with such ease. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby. Great service Webike, thank you very much View detail
Genuine Yamaha O-Ring for FZ1 2006
This FZ1 2006 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
Genuine Yamaha Cotter Valve for FZ1 2006
I was doing a full valve rebuild on this FZ1N 2006 and needed the cotter valves as I did not have these is my garage. I did struggle to find the parts actually available locally so I decided to get them from Webike. I found the parts pretty easily as I already knew the other parts needed and had a schematic for the rest. The price Webike had these for was really good value. With a few other parts in my order, all the items were shipped together with EMS and arrived in perfect condition in 5 days. The packages were all individually packed in Yamaha envelopes and stapled together so I did not lose any in the box. The valves are really small parts and can become damaged if not well protected during transit. Webike have this part spot on, very well packed out with padding. The valves themselves are brilliant quality and you can see this from the machine work that has gone into them. Crisp and clean and no weird shards of swarf on them at all. Just got to get around to fitting this all in with a busy schedule now. Very pleased with the purchase for the 4 cotter valves. View detail
Fits: YAMAHA FZR1000A, YAMAHA FZR1000AC, YAMAHA FZR1000B, YAMAHA FZR1000BC, YAMAHA FZR1000D, YAMAHA FZR1000DC, YAMAHA FZR1000E, YAMAHA FZR1000EC, YAMAHA FZR1000F, YAMAHA FZR1000FC, YAMAHA FZR1000G, YAMAHA FZR1000GC, YAMAHA GTS1000AE, YAMAHA GTS1000AEC, YAMAHA GTS1000AF, YAMAHA GTS1000AFC, YAMAHA YZF1000RJ, YAMAHA YZF1000RJC, YAMAHA YZF750 (YZF750RJ), YAMAHA YZF750 (YZF750RJC)
Genuine Yamaha Cylinder Head Gasket 2 for YZF750 1997
This bike was desparately in need of a new gasket for their YZF750 as the previous owner just did not keep up with maintenance at all. With it being an older mid sized bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Yamaha schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09
Genuine Yamaha Exhaust Gasket for YZF-R1 2008
A few extra parts for the R1 old project bike in my garage. The old exhaust gasket was not doing it's job as it should and rather than using extra exhaust paste to seal the joint, I went for the replacement instead. It just makes sense. I used the tools provided by Webike to link to the manufacturers website to find the correct part number. Easy. As this was part of a larger order with many parts, the shipping worked out to be briliiant. This cut down the cost of shipping by quite a lot. EMS express shipping was used this time and delivered within a week from order. Everything packed neatly inside the sealed box. Webike even filled any empty spaces in the outer box with additional bubble wrap so nothing could get damaged in transit. Even the small parts like this one arrived in perfect 100% condition. The exhaust gasket came in a Yamaha packet and was well packed. The gasket is a copper gasket or some composite with copper inside. I have had these before and they do a great job. It arrived in perfect conditonand and just what was needed to help move along the project. Thank you Webike. Great service and will be back. View detail
Fits: DUCATI 1098, DUCATI 1098S, DUCATI 1198, DUCATI 1299Panigale, DUCATI 400SS (Supersport), DUCATI 600SS (Supersport), DUCATI 888 Starada, DUCATI 899 Panigale, DUCATI 900SPORT, DUCATI 907IE(PASO), DUCATI 959Panigale, DUCATI GT1000, DUCATI MONSTER 797, DUCATI MONSTER 797 Plus, DUCATI Monster S4, DUCATI MONSTER1000, DUCATI MONSTER1000S, DUCATI MONSTER400, DUCATI MONSTER600, DUCATI MONSTER620
Fit perfectly on Monster 795 despite not on the compatibility list. Perform better than I expected, better than OEM View detail