Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Genuine Yamaha O-Ring for forks on VMAX 1200 1992
This old beauty came in for a bit of fork maintenance. There was a bit of a noise and it was discovered that there were a few parts that just needed replacing. This o-ring was one of those parts along with some others. I checked the help section on Webike and cross referenced with Yamaha schematics to make sure they were correct. I added 4 of these o-rings to my basket as I might as well just change all at the same time to save hassle later on whenn the others fail. The preice of these o-rings was really good so buying a few is not an issue or will make any dent in your pocket. Shipped by EMS and arriving with me in 5 days is perfect. Thet all came in a nice Yamaha standard packet and was protected in a bubble wrap envelope Webike made to keep the small items safe. Not a whole lot I can say about these o-rings really, they are not cheaply made, there is no excess rubber hanging around the mould edges, very happy. Install took a while but that was with all the other parts. Really happy customer. Thanks Webike. View detail
Genuine Yamaha Clamp for YZF-R1 2007
I don't usually buy these OEM as parts as they are just tie wraps essentially but the customer wanted all standard so this is what they wanted. Finding the correct clamp was not hard as I search Webike help section and use Yamaha schematics to cross reference. A few other part in my order for this bike and shipped via EMS. I get me orders using EMS in 5 days which I assume is a standard of theirs as that is the timeframe I always work with. Very well packaged products and no damage in transit. The also came in the regular Yamaha packet. The clamp is a good part but again, nothing too special. Works exactly as it should so there are no complaints. Cheap part, oem standard, very pleased. Thanks Webike. View detail
Genuine Yamaha O-Ring for water pump for YZFR1 2003
Genuine Yamaha O-Ring for water pump for YZFR1 2003 This O-Ring also needed replacing for the water pump on the YZFR1. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o-ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in the box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an o-ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o-rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted easily and I hope the rest goes together with such ease. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby. Great service Webike, thank you very much View detail
Genuine Yamaha O-Ring for FZ1 2006
This FZ1 2006 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
Genuine Yamaha Fuel Tank Mold for YZF-R1 2014
This bike came in for some much needed maintenance and to find out why there was a weird knocking from under the fuel tank. After some careful inspection, it was found that the original mold that help prevent vibration from teh fuel tank to the frame had been torn and deteriorated somewhat. The only reasonable solution was to get a new mold for it. It is essentially some thick shock absorbing foam. Not totally unique but worth the effort to refit some new to remove the origianl issue with vibration. Finding the correct damper part number was super easy by using the tools Webike provide from their help pages with links to big manufacturer websites and schematics etc. Easy really. The price from Webike was better than my local Yamaha dealer could do and along with some other parts for this bike, I had them all shipped together to save some money. EMS was teh courier I used as they just get the job done right first time. My entire order arrived in 5 days from order shipping. Perfect. The part came in the generic Yamaha packet. The foam/damper is a nice flexible piece. Seems to be more rigid than standard damper foam and worth the money to get OEM in my eyes. I even used the one full piece in 2 sections for either side of the fuel tank. There is some excess for just the one side anyway. Worked a treat and now there is zero vibration or sound when riding. Very happy with this easy fix and the help Webike provided with my order. View detail
Genuine Yamaha Oil Seal for YZFR6 2016 Water Pump
This YZFR6 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
Genuine Yamaha Expansion Spacer for ROYAL STAR VENTURE S 2011
There were a few parts I needed for this rare bike. One of which was the expansion spacer for the drive gear which was not in the greatest of shape for the age of the bike. I think it might have been caused by rider error but not 100%. Finding the correct part was not hard as I just use the tools Webike provide and then cross reference with yamaha schematics. The orice for the soacer was really good value and better than I could source locally from my Yamaha dealer. With some other parts in my basket, I placed the order and had the entire order shipped using EMS. I do have more than one item in my orders as it really does save on shipping cost as well as time. My order arrived with me in 5 days from shipping which is brilliant. The spacer was packed very well by Webike and there was no damage in transit. The spacer itself is well machined and true to all the specs I needed. Fitting was a paint but once you have it all apart, it's not too bad. Now this bike is one step closer to running perfect. Thanks Webike, great work guys View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
Fits: MOTOGUZZI CALIFORNIA, APRILIA Scarabeo250, APRILIA Scarabeo200, APRILIA PEGASO650 STRADA, HARLEY-DAVIDSON VRSCD V-ROD NIGHTROD, SUZUKI Across, SUZUKI SV400, SUZUKI RGV250 (Gamma), SUZUKI RF400, SUZUKI GSX400, SUZUKI GSX-R1100, SUZUKI DF200, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XZ550, YAMAHA XZ400, YAMAHA XJ750, YAMAHA XJ750, YAMAHA XJ600, YAMAHA XJ600
Vehicle Inspection Measures
NORMAL H4 will pass vehicle inspections, but for further peace of mind, 60W is labeled as equivalent to 100W.
Highly efficient Type was selected.
I measured the illuminance with a smartphone app and saw that it was up about 20%.
However, the H4 was used for years before replacement, and even if it is NORMAL, replacing it with a new one will pay for itself.
I also think it will increase illumination.
Because of its high efficiency, we are concerned about its durability and would like to evaluate it in the future.
View detail
Fits: YAMAHA XV1700 Roadster, YAMAHA XV1700 Roadster, YAMAHA XJR400R, YAMAHA MT-01, YAMAHA XVZ13 AT 4WY2, YAMAHA XVZ13 AT 4WY1, YAMAHA XVZ13 A 4WY1|2, YAMAHA XV19 U 5C76, YAMAHA XV19 U 5C41|2|3|4|5, YAMAHA XV19 U 4D53, YAMAHA XV19 U 4D43, YAMAHA XV19 U 30B6|9, YAMAHA XV19 U 29S3|6, YAMAHA XV19 U 29P6|9, YAMAHA XV19 U 1D73, YAMAHA XV19 S 5C76, YAMAHA XV19 S 5C41|2|3|4|5, YAMAHA XV19 S 4D53, YAMAHA XV19 S 4D43, YAMAHA XV19 S 30B6|9
Used for XJR400R
We were able to install it without any problems as per WeBig's conformity.
There are no leaks, and I feel secure in the fact that it is an OEM Product.
View detail
Fits: YAMAHA VIRAGO 535, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 750, YAMAHA VIRAGO 750, YAMAHA VIRAGO 750, YAMAHA VIRAGO 750, YAMAHA VIRAGO 535, YAMAHA VIRAGO 535, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA VIRAGO 1100, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA V-MAX 1200, YAMAHA FZ750U
Genuine Yamaha Plug Straight Screw (sump plug) for MT09
Purchased to complete the oil change on the MT09. This was due an oil change but I do not like reusing the old sump plug as it often becomes damaged during removal. I plan in advance just in case. Great price from Webike, super easy to find the correct parts. Ordering is very easy, no hassle with trying to figure out postage costs. Very competitve pricing. Ordered a few times from these guys and never had a probelm at all.Everything is packaged very well. No chance of damage in transit. All ok in y package, contents are perfect condition.From ordering to delivery was just over a week including a weekend. Some of the parts were not currently in stock in Webike warehouse but this is never an issue. They get the parts very quickly and ship very quickly too.Thank you Webike, keep up the great work View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900
Genuine Yamaha Blank Key used on FZ1
I had an issue with the lock on the petrol cap and the rear seat unit that stopped working. After a lot of pushing and pulling the key decided to snap. So I did not have to go and buy a totally new set of locks, I had an old set hanging around and decided I would get the lock set cut with a new key, this is where the new blank key comes in. I could have just got some random generic key but as this is an essential part that needs to work every time,I went for the genuine Yamaha one. The part number was not prticualrly hard to find and Webike had these available. Win, win. The price was very reasonable and better than could have sourced locally. There were a few other parts in my order and all were shipped with EMS and arrived in 5 days. ALl my parts were received in perfect condition. The key even came in a small Yamaha bag which was a nice touch. The key has a really good and solid feel to it. Although it is a blank, the edges are smoooth as you would expect. I got the key cut and installed my new/old lock set. All works perfectly and now I can get my seat off. Thank you Webike, great job. View detail