Reviews
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
high quality
Motorcycle Cover is hung in two layers. This product is used on the inside because it seems to be a fabric that will not Wound the vehicle body. It seems to rub in high winds, which may affect the paint somewhat.
When I used Single Body before, bird droppings were difficult to remove because they got into the gaps between the fabrics.
I replace them when they start to powder. This time, the Large seems to be durable even after 2 years. The included Mirror cover is a good protection against powder.
The anti-slap strap tends to get caught in the gap between the brake pedal and the pedal, so depending on the car model, it may be better to be careful when removing it.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used on the outside Cover
The Motorcycle Cover is used in two layers and is used on the outside.
It is water-repellent and waterproof, so even bird droppings and pollen can be washed off.
I am not concerned about the flapping that other users have pointed out, as it seems to be sized just right by the Cover used inside.
It is durable enough to be replaced in two years.
View detail
Switching from NORMAL
The effect was definitely stronger.
Nevertheless, the Grip force of Tire also has a Quantity:Pair (for Left and Right) The current Pirelli Sport Damon is inferior to the IRC RX-02 when it was the NORMAL Pad.
In other words, I imagine that the combination of RX-02 and this pad works very well.
Other reviewers have written about Fee Rings when reverting Levers, but for someone like me with little skill and experience, I have no idea.
Also, when I apply Brake, I hear a jiggle or some kind of electronic sound.
View detail
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
For CB250F
Same as the genuine Front Fork Dust Seal . About shipping and packaging Very good packaging.Fast shipping no way to dammage. About quality and texture Products to buy together realy genuine product. good qulity.Thanks to the webike team View detail
Front Fork Oil Seal Set For CB250F
good quality and great deal from Webike, super fast international shipping, very well packaged and a reasonable price, thanks Webike team great! View detail
The packaging is, sadly,..,
Since Impression was well received, I was excited to purchase this one for myself.
Since I had just replaced the Brake fluid myself not long ago, I also replaced the pad myself.
I have been using Copa Slip to stop squeaking and this time is no different.
The Front of SEROW250 with DAYTONA's HYPERSintered was incredibly scary at first, even on the street, so I set out for a test run with a lot of caution, but it worked there and gradually got better and the break-in period ended after 15 km.
I look forward to Fee Rings at the next and subsequent Tourings.
My only disappointment is the packaging.
Does the Vesrah factory do this kind of packaging?
It arrived in a thin, bag-like Cellophane with a base paper and pad.
Go in, or rather, you can imagine what would happen if you put something that hard and heavy into a Cellophane bag.
The bag was torn, and when I unknowingly took it out of the box, the contents fell down with a thud.
It's hard to believe, but it's true.
And I wanted them to be shipped at least GRUGRU wrapped in plastic wrap,
And if they were put in a box by Webike! I wanted to make sure that measures were taken to prevent the contents from coming out,
If the packaging is this fragile at the time of shipment from Manufacturer, I can only assume that it was torn when it arrived at Webike! I suspect that it was torn when it was delivered to Webike!
Anyway, that makes me feel bad.
There are no scratches on the product and the performance seems Large sturdy.
I would have given it 5 Stars if it ran to some degree and I was satisfied with the Fee Ring, but I gave it 3 Stars due to packaging issues.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
Moriwaki master cylinder cap
I ordered these caps as an upgrade and to add a bit of style, my caps were as ever packaged and boxed to the highest standard,with only four screws holding these on both were fitted within minutes an easy upgrade for your cb13 View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
NC700XOEMPlug
Replacement of 2 man kiloproducts.
As expected of an OEM-adopted Plug, the used Plug still seems to be able to go.
But I felt a sense of Well ignited in any Situation (maybe Frazebo) because the new one is naturally in better Condition.
This is a 2 man-kilometer safe. (Lol)
View detail
For CB250F
.Actually this item i could not found in my country (VX Series Joint Link 520VX3). Finally I bought it from webike. It is original. Very good packaging.fast shipping.I am happy to deal with the webike team View detail
Good part
Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA
I am satisfied
Low unit price and ScrewQuantity with Driver:2pc
It is good to be able to exchange easily.
Inexpensive foreign-made products may be poorly processed.
I have a lot of defective products and I don't want them to leak.
We chose MORIWAKI products, even if they are a little more expensive.
The look would have been better if it were made of Plating.
View detail
It's easy
If you have a Caulking Tool, you can easily Crimp. If you don't have a tool, use a clip type! View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
CB1100 Fork Seals
Another great deal from Webike, super fast international shipping, very well packaged and a great price, thanks Webike you guys are great! View detail
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Cover for honda shadow 750 phantom
Good morning. The cover arrived in its original packaging and fits perfectly on the motorcycle. The rubber isn't cracked, indicating it's made of good material. There were no issues with the installation. View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail