Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
CB250F MUFLER PROTECTED RUBBER
This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER COLLAR
Genuine product - COLLAR, FR. FENDER 61104-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Necessary and sufficient, a sense of security
I have bought this product many times because I think it is a consumable and does not have a large impact on performance, etc., so I focus on the cost.
When I bought a product from a certain D company, I felt the accuracy of the Screw threads was not good enough? I felt a little bit of a snag when I turned it by hand, but NTB has no problem.
I have never had any problems with durability, etc., as I change the parts regularly.
As for the car models in Lineup, I think NTB is the way to go.
View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Rear brake rotor
When I had my CB750 RC42 inspected, the clerk at Honda Mahaja Super JOGZr Wing Black told me that I should replace the rear brake pad and rear brake rotor because they were worn out, so I bought the parts and replaced them myself. It took a long time to replace them, but it was a much easier replacement than I thought it would be.
It was a very enjoyable holiday. I think the next step is to replace the front brake rotors.
View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Good quality part!
Fits my USA XR400R perfectly! Good quality OEM part. These help keep the swingarm grease clean. Once the rubber is dried out or cut up, it's time to replace them. This is especially important on a dirt bike, where mud and water are likely to get in there. The rubber on the parts I received was very fresh feeling. View detail
Good cosmetics, old standby.
[How is it used?
It has been a standard consumable for a long time. I use this Filter every time.
How was your experience with it?
The quality is stable and reliable. I am satisfied with the quality of the product and have had no problems with it.
[Points to note]
Even if you use Filter wrench, you may choose to use Wrench because it is a Type without corners. I have never had a problem because I stick the Driver in and remove it.
How did it compare to other products?
It is comparable to the OEM Product, and I don't think there are any problems. There is no visible difference in performance, but it is a good consumable item for periodic replacement due to its good cost performance.
View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Logo from brembo is good.
Normal disk rotor became thin and was used as a replacement.
I drove about 600km and changed the pads with new brembo pads at the same time, so I think they came on quickly.
Naturally, it stops firmly.
Control is also not a problem.
Now we expect durability.
View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
Rear FenderRubber
Rear Fender's RubberSeat Stopper was lost, 1pc. was not attached, so it was purchased and installed.
It was helpful that the same item was sold by HondaOEM Product.
View detail
Rubber under Seat
The Rubber stopper under the Seat was out of date, so we repurchased it.
It is helpful that the same product is sold by HondaOEM Product.
I thought about replacing all of them, but they are not that cheap, so I will replace only 1 pc. this time.
View detail
Good Brake Pads
Very good Control. Durable and reliable. View detail
I finally bought it.
The Rear disk rotor on my cb750 rc42 was due for replacement, but the OEM was discontinued. I bought the disc rotor from brembo at Timing without hesitation. I bought it without hesitation. I may not be able to install it before the end of this year.
Currently coordinating with Shop.
No complaints about the quality or appearance of the product.
I will give an impression when I install it again.
View detail
SUNSTARPremiumRacing disk rotor Hall Slit Type
[How is it used?
200 km traveled with it installed.
Was the one you received as per Image?
It was just like the Image and very cool!
I also bought Front and Front together, so the front and back together are a great parenthesis!
Was the installation difficult?
Pitches, etc. are the same as CB, so just replace them.
How was your experience with it?
Braking force has increased Control.
[Included Parts:were they on?
Only Body was in the bag.
[Was there anything that disappointed you?
nothing special
It was cooler than I expected.
View detail