Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Has the part number been changed?
I have not seen any particular note, but I assume that if you order with this part number, you will probably receive the one with the -80 suffix, and from the aggregate information on the Net, it seems that some Filters, including the -61 one, have been unified with the new part number (-80 suffix).
It is a bit of a shock to receive a different part number without any explanation, but you will be able to use it without any problem.
View detail
After all, it's OEM!
Along with the oil change, I replaced the Oil Filter. I can't tell if the Oil Filter is good or bad right away, but it gives me a different feeling of trust and security. When I replace it again, it will be OEM. View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Genuine Yamaha Clutch Friction Plate for FJ1200 1992
This was one of those jobs that was desparately wanted doing as this clutch has been needing attention for quite a while now. Time for the new clutch plates to sort it out completely. This order was for the friction plates, I purchased the full set of these along with the steel plates for the full overhaul. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plates for this model Yamaha but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. You do not have to soak these friction plates but adding a little oil to the other steel plates is a good idea. Fitted pretty easily and quickly and now ready for the season ahead. Thanks Webike, great job. View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Genuine Yamaha Gasket for XT250
Whilst I was changing out the oil and already purchased the new oil drain plug, I wanted to make sure I had a good seal so also purchased the genuine Yamaha gasket for this bike. This is only the second oil change I have done on this bike but it is only a 2019 model anyway. The correct gasket was found when I checked for the correct oil plug. Not too tricky when you have the Yamaha schematiics in front of you. The price was really good value, yes, you could get a pack of cheaper after market gaskets but for this money, why would you risk a good seal. Anyway, with a couple of other parts I needed including the oil plug, I had my order shipped using EMS. My order arrived in perfect order and 100% no damage in 5 days straight. The gasket was in the usual Yamaha clear packet. There were no contaminants inside the packet which was nice. The washer looks to be copper but I would assume it is a copper and some other metal mix. Easy job to do replacing the gasket and oil plug but make sure not to over tighten. Use a torque wrench and make sure you have it right. Very happy customer. Great work Webike. View detail
Genuine Yamaha Plug Straight Screw for V STAR 1300 2015
Purchased to complete the oil change on the V STAR 1300. This was due an oil change but when I checked the plug, it had been really chewed up with some idiot using metal pliers to loosen. This was toast and needed a brand new replacement. I do like to plan in advance just in case but even I could not have seen this coming. Great price from Webike, super easy to find the correct parts. Ordering is very easy, no hassle with trying to figure out postage costs. Very competitve pricing. Ordered a few times from these guys and never had a problem at all. My order was shipped using EMS as they get my parts to me fast and efficiently. Everything is packaged very well. No chance of damage in transit. All ok in my package, contents are perfect condition. From ordering to delivery was just over a week including a weekend. The plug came in teh standard Yamaha packet and all the threads were spot on, no weird burrs of swarf in there either. Very clean and top quality part. Webike are renowned for getting the parts out very quickly and ship very quickly too. One happy customer right here. Thank you Webike, keep up the great work View detail
Genuine SBS Rear Brake Pads for Yamaha FZ8
This was a set that I needed to replace the ones I previously had in the bike. I wanted to try and match the rears with the fronts I was purchasing at the same time but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper. I used the tools Webike provide and then cross referenced with Yamaha and SBS websites for my own peace of mind. I had a few other parts in my order including the SBS front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a shrink wrapped SBS packet and also Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail
Genuine SBS Front Brake Pads for Yamaha FZ8
These were the front pads for the FZ8 and I wanted to try the SBS brand to see how they faired against other brands. Finding the correct pads was not super hard at all. I just went on SBS website and put my make and model in and the options were clear to see. I opted for these street excel sintered as they are pretty agressive pads and should work a treat. The cost was really good value and along with the rear pads for this bike already in my basket, I got them all shipped together with a couple of other small parts. Doing it this way, save a few pounds on shipping too. I use EMS as they just get my orders to me fast and efficiently. 5 days from shipping is all it took which is amazing. The pads and all the rest of my order was packed really well and any empty space was filled with bubble wrap for security of the parts. The front pads came in teh shrink wrapped SBS packet. There was no sign of contaminants or brake dust like you get in some ohter brands. The pads have a very coarse sintered material and hopefully will not take too long to bed in. Fitting in no time as I already had the calipers off and ready to go. Next time out, I will be testing these and edit my review. Great job Webike, thank you. View detail
Reliable OEM
The XSR900 is the first DIY replacement.
There were cheaper filters available, but we went with OEM for reliability...
Well, I guess it's a matter of mood (chuckles).
View detail
Replacement Neutral Switch for Yamaha
One part broke on my bike and teh neutral light would not work, this also made the bike throw a code up too which was not good. I checked Yamaha for the part number and then just searched on Webike to see if they had this part number in stock. Very lucky that they did and I added with some other parts to my order. I used EMS to get my package and this arrived in a week. All packed very good, lots of secure wadding. The swithc is very small but delicate and did not want it to get damaged. No problem with how Webike packaged my order. The switch is great quality, the threaded section is very well made and installed very easily. Now my neutral light works as it should View detail
Replacement Fuse 50A Yamaha
My main fuse has blown and I need a replacement. I bought them from Webike as I have not seen them any cheaper elsewhere. Added a few of these in case of future failure. I checked my Yamaha manual to find correct part and searched on Webike. Very good price for this part I needed. Shipping was good value and cheaper with EMS and arrived in a week. The part was packed very well and no damage. The fuse was in Yamaha packet and perfect. Fitted easily and works as it should. Very impressed with Webike service. My bike works again. View detail
Genuine Yamaha Clutch Steel Plates for YZF-R1 2002
This was one of those jobs that was desparately wanted doing as this clutch has been needing attention for quite a while now. Time for the new clutch plates to sort it out completely. This order was for the steel plates, I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. As I already had a few other parts in my basket waiting to checkout, this cut down the shipping and spread it across all the parts. All arrived in tact and perfect condition in less than a week via EMS fast service. Webike packed all my items out securely and with some additional bubble wrap. 100% perfect when I got them. Not really bought many clutch plates for this model Yamaha but when I do, I always go for the genuine ones which I know will work exactly as they should. At this price, it would be foolish not to buy genuine. The tolerances for each plate was the same as the specs in the manual. There was no oiliness or contaminants so these were good to fit. I always add a little oil to the steel plates to help with fitting. Fitted pretty easily and quickly and now ready for the season ahead. Thanks Webike, great job. View detail
Genuine Yamaha Clamp for YZF-R1 2007
I don't usually buy these OEM as parts as they are just tie wraps essentially but the customer wanted all standard so this is what they wanted. Finding the correct clamp was not hard as I search Webike help section and use Yamaha schematics to cross reference. A few other part in my order for this bike and shipped via EMS. I get me orders using EMS in 5 days which I assume is a standard of theirs as that is the timeframe I always work with. Very well packaged products and no damage in transit. The also came in the regular Yamaha packet. The clamp is a good part but again, nothing too special. Works exactly as it should so there are no complaints. Cheap part, oem standard, very pleased. Thanks Webike. View detail
Used for YamahaBOLT Shoulder Bag.
I have been replacing Oil with YamahaBOLT Shoulder Bag around 3000Km of running,
The oil filter is changed at the same time every two cycles.
In that case, Filter uses this YamahaOEM product.
If you choose by price, ThirdParty products are more attractive.
OEM is the only choice in terms of buying peace of mind.
I have used Other Brand Products in the past and had a very hard time removing them.
Since then, we always choose OEM Products.
View detail
The usual K&N, the usual peace of mind.
There are YOSHIMURA and regular MODELs, but the price is almost the same, so of course I chose the YOSHIMURA K&NOil Filter with Sticker.
It's a Brand that's almost like a standard when it comes to oil replacement, so it's a safe place to start.
The rest is with nut, so it can be quickly tightened with a regular Glasses Wrench or Socket.
You don't have to go out of your way to buy Oil Filter tools and save some money.
I did not use the YOSHIMURA Sticker that I received, but I stuck it on something other than Motorcycle as a decoration. Yes, it is YOSHIMURACup. It looks just right.
I have always been attached to K&N's, so when it comes to Oil Filters, I don't want to use anything else, or even think about it.
View detail