Reviews
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Replacement for OEM grommets
I got these as a replacement bush for my new fenders. They fitted much firmer in the holes and are a excellent price vs oem. Super basic and easy to install. A+ View detail
Fits: HONDA GORILLA [gorilla]., HONDA MONKEY [MONKEY].
Front Lowering springs
Nice lower but heavier springs than stock, help get that 4mini look with these fork springs. used to lower the front of a gorilla View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Amazing Top Bridge Dress Up Bolts
The quality is amazing with a great polished nickel look. I've included a photo for comparison. The supplied bolt is slightly longer and the countsunk has a larger surface area, I feel as though it's much stronger now. Would recommmend buying with polished top plate for a great look. Installation was extremely easy, I believe anyone can do it. Shipping was super fast from webike, always happy thank you webike! View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
Chain Slider Protection
Rubber protection boot feels high quality. Installation was very easy and simple, the fitment isn't 100% perfect around the chain cover bolting position but can hardly notice id say 9.5/10. It will protect my swingarm from my chain perfectly. Packing was very nice and shipping times from Webike is always very fast! Thank you Webike! View detail
OEM Equivalent Product, cheaper than OEM
Used for LITTLE CUB.
The low beam ran out, and a short time later the high beam also ran out. I bought this one because it was an emergency situation and it was immediately available in stock. The standard is 25-1. The Pine Stripe part number is 1P2015.
The grade of the bulbs is also the same as the OEM, White Hot bulbs, not Halogen.
I also found HalogenType, but the price difference was about three times as much, so I decided to go with the cheaper version.
Replacement is Light rim bottom, Quantity:Pair (for Left and Right) Remove the screw on the Plus of the light rim and lift the light rim upward to remove it.
The Glass part is replaced while touching as little as possible. Time required:2 minutes.
It lit up with no problem. I am relieved. I don't know about the durability yet, but it is a long-established domestic product and I am sure there will be no problem.
View detail
smooth braking
I install SP Takegawa brake lever on modified Honda Dream 100, the SP Takegawa kit include 2 mirror bracket M8, M10 and front #29;stop switch with long cable. The brake lever fit on stock handlebar and smooth braking. View detail
takegawa is best
Before purchasing Takegawa brake arm joint, I thought about it with Kitako product. I bought a brake adjustment bolt with Kitako, so I was going to make it into a set. but I bought Takegawa Arm Joint because the design and details looked prettier. The finish of the material is good as I thought, and I haven't installed it yet, but I think it will go well with Super Curve because I bought it in silver like a genuine product. Thank you. View detail
Fits: HONDA GORILLA, HONDA MONKEY
MinimotoSPIIBracket installation
It can be installed securely, originally, the Frame Nut is used to install the OEMAir cleaner, so it is recommended to modify it with Tap. View detail
Very effective for knee grip. Good!!
The wide range makes the knee grip much more comfortable and firm. Unlike other knee grip pads, this product contains high-quality 3M tape, so you don't have to worry about it falling off.
Additionally, this product has a high-quality finish, making it much more luxurious than other knee grip pads. I highly recommend it. -------------------------------------------------- -------- The wide range makes it easier to make Ngrip much easier and harder, and this product has a high -end 3m tape different unlike Ta Niglip Pad, so you don't have to worry about falling. In addition, this product is much more luxurious than other companies' Nigip pads with a high-end finish. Powered by Google Translator
View detail
Fits: SUZUKI ADDRESS V125, KAWASAKI KSR110, HONDA PCX125, HONDA MONKEY, HONDA APE 100, HONDA GORILLA, YAMAHA CYGNUS X (FI), HONDA APE 50
Used for CUB90
CUB90 is equipped with external Tachometer, various sensors, USB power supplyCoupler, and LED on the Tail to reduce battery load.
The bulb power consumption of the NORMAL is 15W/8 and the LED is 21W/5. The LED is not labeled in Lumen so I did not know how bright it was but I trusted Brand.
The large size is a little smaller than a light bulb, the bracket is in good condition and the tail lens has not been hit.
I read that it was a little dark in the impressions, so I cleaned the tail lens and put aluminum tape on the tail case, which is an old-fashioned way of doing things.
The Tail Chica-Chica is a little bit when the Idling is on. Stop-lamp is powered by battery, so it does not ChicaChica. The light is bright enough to pierce your eyes at some angles.
When the Lens is turned on, the ChicaChica of the Tail is not felt. The brightness of the Tail is about two-thirds that of the bulb, and the Brake is about the same or slightly stronger than the bulb, which is fine.
Tail is AC so ChicaChica is not an option but I don't know how it is for the life of the LEDs. I have been using it for about 6 months and so far no problems. I remove the Lens every once in a while, but it is not burnt or deformed.
After installation, the charging voltage did not change during idling. Battery load seems to be decreasing. I think it can go as it is.
View detail
Fits: HONDA XL250, HONDA XLR250, HONDA GYRO CANOPY [Gyro Canopy]., HONDA MONKEY [MONKEY]., HONDA GORILLA [gorilla]., HONDA NS50, その他 , YAMAHA XT250X, YAMAHA serow225 [serow]., YAMAHA TW200, YAMAHA TZR250, YAMAHA TZR125, YAMAHA SR400, YAMAHA TDR250, YAMAHA RZ250, YAMAHA RZ125, HONDA Live DIO [live dio]., HONDA BENLY CD90 [BENLY]., HONDA FTR250, HONDA XL125
It's neither good nor bad
Used on HondaSUPER CUB 90 (with Cell motor).
I don't usually ride much, so my Battery goes up.
I thought about buying a new battery, but I thought I could just use the battery reply! I thought I would buy a new battery, but then I decided to use the battery reply.
Arrived and opened the package. There was no Instruction Manual for the product. The back cover of the product looked like it could be opened easily, so I opened it and found ・・・・
It seemed easy to make if you were familiar with electrical engineering. I was disappointed at the price! I was disappointed.
But I can't make it, so I have to be patient.
Well, I managed to finish the wiring and took it for a test drive, and it was a little better than when the Battery went up. It was a little better than when the battery went up.
Well, this is what it looks like. I don't need to buy a battery. I'm satisfied with that.
Maintenance-free, another step closer.
View detail
Made by DAYTONA
[How is it used?
Used to replace front and rear Drum Brake Shoe,
Because the previous Shoe replacement time was unknown and it was not working well.
How was your experience with it?
When Brake was applied with the same sensation as before the replacement, the Rear brake worked so well that it locked up!
How did it compare to other products?
It may not be as effective as a disc brake, but it is as good as a disc brake, and I am very satisfied with the large size.
[Points to note]
Nothing in particular, but beveling of the shoe, cleaning of the drum brake, and grease up are also required prior to installation.
Brake wires, clutch wires, and other parts were also replaced, both front and rear, but it was not a difficult job, as it was started in the morning and finished before noon.
(I'm giving it 4 stars because I'm not sure how durable it will be.)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Used for GN125H
I used to use KYB's MGS305, but the spring rate was too high and it was too lumpy, so I removed it immediately.
The next choice was this one.
I weigh 54kg and I sink to the middle of all strokes when riding.
BumpTouch occurs when riding on large bumps, but it doesn't happen often, so it doesn't bother me.
Dimension Information
Spring rate estimated around 0.5kgf
Stroke 50mm from Shock out-extended state to BumpTouch
Total length of Spring when removed from Shock:195mm
Total length of Spring when Shock is installed:180mm
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Very high CP ◎No accuracy problems
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.
Was the one you received as per Image?
The image is just as I imagined.
Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.
How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.
As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.
As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)
[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first.
View detail
Fits: HONDA GORILLA, HONDA MONKEY, SUZUKI CHOINORI SS
On the KSR80.
[How is it used?
KSR80 was delivered and used for storage.
Was the one you received as per Image?
I used it on a different Motorcycle so I imagine.
How was your experience with it?
I had used it on a different Motorcycle and found it easy to use, so I decided to use it on the KSR as well.
[Points to note]
The size was just right for KSR. If it is a little bit larger, the lower end of the tire will be too large.
How did it compare to other products?
Better than the StandardMotorcycle Cover of 2 Rinkan.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail