Reviews
GYROX (TD02)
I have a GYROX (TD02) 4Cycle. With the OEM setup, the RPM limiter was activated at about 50km/h and the speed did not go up any higher. It is thought that the RPM increase is suppressed and the speed is increased. I feel that the acceleration became a little slower, but it is acceptable and not inconvenient. As expected from DAYTONA! View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
![Drivetrain Adjusting Boss Washer [0.7mm] DIO Type](https://img.webike-cdn.net/catalogue/images/56921/12251946_5c220a9fcd068_TS.jpg)
It was Garbage,,, it's Aluminum, so it will be crushed.
I didn't expect the material to be Aluminum...it doesn't say anywhere, so I didn't know what it was and I bought it.
Since it is Aluminum, it is just tightened with the stipulated Torque, but it crushes easily and makes no sense.
I'm crushed when I run after installation and I don't see any difference in acceleration.
I use a lot of KN projects because they are inexpensive and available, but this was Garbage.
View detail
Plug is consumable
Used for replacement on vtr250.
Plug on Front side is replaced by shifting Radiator slightly.
The Rear side cannot be replaced without removing the Tank.
It was Large strange, but it blew better after the replacement.
It's not Windshield IRIDIUM or anything like that, so it would be better to effect it on a regular basis.
View detail
Fits: KAWASAKI ZRX1200 ZR A7F, KAWASAKI ZRX1200 ZR A8F, KAWASAKI ZRX1200 ZR A8FA, HONDA CB400SB ABSSpec. Model:EBL-NC42, HONDA CB400SB, HONDA CB400SF ABSSpec. Model:EBL-NC42, HONDA CB400SF, HONDA CREA SCOOPY Model:JBH-AF55, HONDA CREA SCOOPY i Model:BA-AF55, HONDA DIO4st CESTA Model:JBH-AF68, HONDA DIO4st, HONDA FORESIGHT, HONDA GYRO X Model:JBH-TD02, HONDA GYROCANOPY Model:JBH-TA03, HONDA HORNET250, HONDA LEAD100 Model:EBJ-JF19, HONDA MAGNA50, HONDA PS250, HONDA SHADOW400 Model:BC-NC34, HONDA SPACY125
Reliability Large Stanley
Replacement of Meter lighting and Pilot bulb for VTR1000F.
The VTR was under total disassembly and was replaced.
I thought about OEM Product, but the price is too expensive for 9 pieces!
Quantities at Reliable Stanley:I bought 1 Set of 10pcs. because it was cheap! 。 No complaints and peace of mind.
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
great greap
I liked these grips, they look like factory ones, they were delivered in 2 weeks, I’m very happy with the purchase, I will recommend them to friends ------------------------------ ---------------------------- I liked the vulture data, they looked like factory ones, delivered in 2 weeks, I am very pleased with the purchase, I will advise my friends Powered by Google Translator View detail
Very good Touch!
This is a 2008 ZOOMER.
The mileage was only about 5,000 km and it was still usable, but it started to squeal and work poorly, so I replaced it with a reliable Daytona.
It took some effort to remove the rear tire nut, but I am satisfied with the soft touch and effectiveness.
Durability will be confirmed in the future.
View detail
Mini greap hunter
very good grips, similar to the factory ones, very soft, comfortable to hold, I really liked it, I will recommend it to my friends View detail
Even amateurs are satisfied with the results there.
This was my first attempt at Seat reupholstery for SMART DIOAF56.
In terms of work, all you have to do is to hit Staple with Tucker and fix Seat so that it does not become Wrinkle.
I also used Tucker for the first time, but it was easier than I expected because the Seat fabric matches the Seat shape and is stretchy and thin.
The finished product is now PRO grade on the front side of the Seat.
The staple on the reverse side could not be typed very neatly, but since it is an invisible part, it does not bother me that much.
Seat is made to be comfortable and soothing without any slippage.
The fabric is inexpensive and worth a try.
View detail
Looks cool.
Anyway, since it is a race ish, it is similar to KITACO's discontinued product, but if you put it on CHALY and start off on a slope, high-octane gasoline will leak just a little bit, but I forgive it because it looks cool! View detail
Thank you.
No problem
Easy to use
Thank you.
View detail
Fits: HONDA DIO, HONDA SUPER DIO, HONDA DIO FIT, HONDA LIVE DIO, HONDA SMART DIO, HONDA CREA SCOOPY, HONDA ZOOMER
Nice quality front fork
This machined aluminum front fork works fantastic on a Honda NPS50. They are of good quality and look nice. Do better than the original front fork. -------------------------------------------------- -------- This edited aluminum fork is fantastic on a Honda NPS50. Are of good quality and look nice. Do better than the original fork. Powered by Google Translator View detail
Fits: HONDA Benry 50S, HONDA CB125, TRIUMPH SPRINT ST, HONDA ZOOMER(Ruckus), APRILIA SR125 (APRILIA), APRILIA SR 50, HONDA BENRY CD50, HONDA CD70 (Benly), HONDA Benly CD90, HONDA Hunter Cub CT110, HONDA EV-Neo, HONDA GROM, HONDA Dio (4-stroke), HONDA Via., HONDA broadcloth, HONDA Lead 110 (EX), HONDA Lead 50, KAWASAKI AR50/S, KAWASAKI Z125 Pro, KTM 1190 RC8
For SUPER CUB
I had been using a Cover that I had purchased at Home center, but it was torn, so I decided to go with the fireproof Type anyway.
I have retrofitted the CUB with a Front Shield and it just fits without any problems.
The rest is expected to be durable
View detail
It is cheap and good
Used for SUPER CUB 50Custom.
I bought this for a fine, nondescript Grip. I think it is good for the price, with no smell and moderate elasticity.
The length is just right and the hole Size is appropriate and fine.
It is a mistake to ask for the same level of durability as OEM, but if it gets worn out, feel free to replace it because it is a cheap product.
View detail
Basic performance is brought out.
I used it on an air-cooled 2Valve Kawasaki and it worked well, so I tried it on a V-TWIN MAGNA.
This is a replacement from an OEMPlug with 10,000 miles on it.
The bouncy Fee Ring is great!
View detail
Fits: HONDA FAZE [Faze]., HONDA FORESIGHT [Foresight]., HONDA FORZA [Forza]., HONDA FORZA [Forza]., HONDA FUSION [Fusion]., HONDA FUSION [Fusion]., HONDA SHADOW400 [SHADOW]., HONDA SHADOW400 [SHADOW]., HONDA SILVERWING600 [Silverwing]., HONDA STEED400 [STEED]., HONDA STEED400 [STEED]., HONDA SHADOW750 [SHADOW]., HONDA CB1100, HONDA DIO [Dio]., HONDA GYRO [Gyro]., HONDA GYRO [Gyro]., HONDA Giorno., HONDA SuperCUB [Super Cub]., HONDA TODAY [TODAY]., HONDA Live DIO [live dio].
There are a lot of messy parts.
First of all, when I try to install the Mirror Holder with only the Included Parts:, there are so many Mirror Holder mounting bolts, each corresponding to a different size, but all of them are long.
The hole depth is not deep enough for a normal Mirror Holder.
Also, the glue used to attach the mirror surface is on the body side, and although the shape is good for Parenthesis, it is an inferior product that only looks good.
View detail
Fits: HONDA SH125, HONDA SH150, HONDA VFR750, HONDA Claire Skoopy., HONDA Claire Scoopy i, HONDA Clare Scoopy i-Special, HONDA Claire Scoopy Special, HONDA Shadow 125, KYMCO Venox 250, HONDA AX-1, HONDA CB-1, HONDA CB400 Super Four Version S, HONDA CB400 Fore, HONDA CB500, HONDA CB500S, HONDA CB900 Hornet, HONDA CBF1000, HONDA CBR400RR, HONDA CBR600F, HONDA CRF150R
Engine is activated with a single cell shot.
The Engine can now be started with a single cell shot. View detail
Fits: HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart Dio (SMART DIO), HONDA Smart・Dio DX, HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA Smart・Dio DX (SMART DIO), HONDA ZOOMER (ZOOMER)
Engine is happy.
I hadn't replaced it in about 15 years, so the Engine seems to be happy and starts up with a single Cell. View detail
Fits: HONDA Smart Dio, HONDA Smart Dio, HONDA CREA SCOOPY, HONDA CREA SCOOPY, HONDA SMART DIO, HONDA CREA SCOOPY
SMART DIOZ4 (AF63) is the only choice.
This is the only rear suspension that can be attached to the Z4 without modification.
It is clearly better than OEM Product.
Pre-road adjustments were made while circling the shore of Lake Miyagase.
KITACO will recommend the special tools from KITACO.
View detail