Reviews
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
The colors are subtle.
It is Black but has a Blue tint in bright areas. It may be unavoidable, but it is not Black. View detail
Fits: HONDA MBX50, HONDA MBX50F, KAWASAKI ER-6n, KAWASAKI XANTHUS, KAWASAKI ZXR750, HONDA CB400F, HONDA Shadow Sabre, HONDA Shadow Aero, HONDA Shadow, HONDA Rebel 1100, HONDA CRF1100L AFRICA TWIN, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBF600S, HONDA CBR1000RR SP2
Parenthesis OK
The OEMCap was poor, so I looked for a variety of options but settled on MORIWAKI.
Titaniumium gold is good for a stylish look.
View detail
Fits: HONDA clair-scoopy, HONDA Julio., HONDA Magna 50, HONDA XR50 Motard, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA Super Cub 110, HONDA Super Cub 110, HONDA baton, HONDA byte, HONDA byte, HONDA monkey, HONDA livudio, HONDA livudio, HONDA livudio, HONDA livudio
It purchased as spare parts. The case is also attached and it is recommended.
It purchased as spare parts.
The case is also attached and it is recommended.
View detail
Fits: HONDA Johno 2, HONDA byte, HONDA clair-scoopy, HONDA Journo Clare, HONDA Smart DIO-DX, HONDA Smart DIO
It didn't sacrifice low speeds as much as I thought it would.
GIORNO CREA has a weak center spring, and shifting starts almost as soon as the car starts, so the weight roller was set 1g lighter than the attached one, and the 0.3mm boss shim was used to make the Belt drop deeper to slightly raise the Engine RPM at low speeds. The weight roller is 1g lighter than the supplied weight roller, and a 0.3mm boss shim is used to increase the engine rpm at low speeds. By doing this, I think I can solve the problem of low speed leaning that is often seen with high speed pulleys. I think that the best setting is to set the center spring a little harder and make the weight heavier, while slightly licking the weight roller surface of the pulley and shifting it a little to the high rpm side within the range not exceeding 8000 rpm. View detail
Fits: HONDA Broad (BROAD), HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CALLY (CHALY), HONDA CB400 Four (Four-), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR/CB400 SUPER BOL DOR Special Edition (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR), HONDA CB400 SUPER BOL DOR <ABS> (SUPER BOLDOR)
Horn normal in a good way.
Replaced because it was rusted and no longer useful.
It's compatible and Universal, but it's also very practical because it sounds decent.
It's not expensive, so it's helpful.
good point
It is easy to install.
It is also safe because it has a decent sound and Large size.
A bad point
It may be easy to rust.
Horn is not something that is rarely sounded, but when it comes time to use it, you don't want it to not work, so it is better to Check it.
View detail
Fits: HONDA G-dash, HONDA baton, HONDA baton, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA Superdio, HONDA Superdio, HONDA Dio XR Baja, HONDA Dio XR Baja, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Superdio, HONDA Superdio, HONDA Superdio
Very high quality performance disc
Very good build quality. The material also thicker than original. The design help to improve the braking performance. Recommended for replacement and upgrade. View detail
Fits: HONDA clair-scoopy, HONDA Gyro UP, HONDA Gyro UP, HONDA gyro X, HONDA gyro canopy, HONDA Johno., HONDA Journo Clare, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA byte, HONDA TODAY., HONDA Livdio ZX, HONDA Gyro UP, HONDA gyro canopy, HONDA Gyro UP, HONDA gyro canopy
Unsure how long it will last as I don't trust the quality.
I decided to replace the Belt, Pulley, and Clutch because I have no idea how the drivetrain has been taken care of on a used car with unknown mileage.
The arrows are marked, so be careful of the direction when replacing.
When the belt cannot be attached, the clutch can be widened to allow the belt to drop down and rest on the shaft on the pulley side.
Even with a reasonable one, the speed is normal because it is new.
I don't trust this Manufacturer's products now, so I will use something else the next time I replace it.
View detail
Fits: BMW R100, BMW R80, BMW R90Series, BMW S1000RR, DUCATI 1098, DUCATI 1198, DUCATI 1198, DUCATI 1299 Panigale S, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO, DUCATI 851STRADA, DUCATI 888 STRADA, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999
I bought it to put on my MATE 80, but it didn't stick.
I bought it to put on my MATE 80, but it didn't stick. View detail
Fits: SUZUKI Boulevard 1800, SUZUKI Boulevard 1800, SUZUKI BANDIT1250 [BANDIT]., SUZUKI SKYWAVE400 [SKYWAVE]., SUZUKI GLADIUS400 [Gladius]., SUZUKI INTRUDER400 [Intruder]., SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ45A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI DJEBEL250 [Jebel]., SUZUKI INTRUDER250 [Intruder]., SUZUKI GSX250, YAMAHA Cygnus X, YAMAHA VINO [Vino]., YAMAHA VINO [Vino]., YAMAHA JOG [jog]., YAMAHA JOG [jog]., YAMAHA JOG [jog].
Don't buy it.
I can't say how I feel about it because it was damaged before I used it or installed it. View detail
Fits: SUZUKI Boulevard 1800, SUZUKI Boulevard 1800, SUZUKI BANDIT1250 [BANDIT]., SUZUKI SKYWAVE400 [SKYWAVE]., SUZUKI GLADIUS400 [Gladius]., SUZUKI INTRUDER400 [Intruder]., SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ45A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI SKYWAVE250 [SKYWAVE] (CJ46A -), SUZUKI DJEBEL250 [Jebel]., SUZUKI INTRUDER250 [Intruder]., SUZUKI GSX250, YAMAHA Cygnus X, YAMAHA VINO [Vino]., YAMAHA VINO [Vino]., YAMAHA JOG [jog]., YAMAHA JOG [jog]., YAMAHA JOG [jog].
worst case scenario
Worst. I will never buy again. Never buy from them again. The ball adjusting tool is too limp to tighten it. I don't want to deal with this kind of thing. View detail
Fits: HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio, HONDA SmartDio
Replace while servicing
1.I replaced it while servicing a ZOOMER with 2000 km on it. The original weight roller was a little worn. Since my ZOOMER is equipped with DAYTONA products in various parts, I chose DAYTONA for the pulley as well. The removal and installation required the so-called Universal holder. This is the first time for me to do customization and maintenance of this part, so I was a bit concerned. I had never done customization and maintenance of this part before, so I was very careful, but I think anyone can do it if they know how it works. This product does not come with a weight roller, so you will need to purchase one that fits your ZOOMER. I installed 5.5g×3 and 6g×3 on my ZOOMER. After installation, the maximum speed increased from 63km/h to 69km/h. View detail
Fits: YAMAHA Vino (VINO), YAMAHA Vino (VINO), YAMAHA JOG (JOG), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Giorno・SPECIAL Knife, HONDA Giorno, HONDA Giorno, HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER), HONDA ZOOMER (ZOOMER)
For WINE AY-02
It was like a normal Brake Shoe.
for Rear is →NTB:?A6-BS121 Brake Shoe
View detail
Fits: HONDA Cabina 90 SCX90R, HONDA Cabina SCX50R, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CUV ES ESC1R, HONDA NSR250R, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR250SP, HONDA RVF400, HONDA RVF400
flashing
The front blinker seems to be blinking badly, so I bought this to replace it with a new one.
It is helpful that OEM used products can be sold and purchased as Single Item.
View detail
![Normal Thread Screw Universal 8mm [1 Set Of 2pcs.] Rear Mirror Oval HONDA L/R Set](https://img.webike-cdn.net/catalogue/14155/101-001_TS.jpg)
Fits: HONDA TACT, HONDA DIO, HONDA LIVE DIO, HONDA SMART DIO, HONDA ZOOMER
You can use it.
Installed on SPACY100.
I replaced the one that was on before because it was getting hard to see due to vibration.
The bracket is a bit long, but it is very easy to see and comes with a Rubber Cover to cover the Screws.
Two pieces Quantity:I am satisfied with this price for the set.
View detail
Fits: HYOSUNG RX125, KYMCO Ve-Knocks 250, HONDA VFR750, HONDA VFR750F, HONDA VFR800, HONDA VFR400Z, HONDA VFR400K, HONDA VFR400R, HONDA VFR400K, HONDA ST1100AST1100 PAN EUROPEAN, HONDA CB500, HONDA CB500S, HONDA HORNET900, HONDA ST1100, HONDA SH150, HONDA SH125, HONDA CRF150RII, HONDA CRF150R, HONDA CBR600F, HONDA CBR400RR
That's NGK.
The manufacturer's recommended replacement time is 5000 km, but if you keep replacing the electrodes for that long, your gold won't last long. I don't feel any deterioration in performance even after 15,000 kilometers, and I think the product is large enough to last even after 20,000 kilometers of normal replacement. I think it is best to replace it after about 10,000 kilometers from a motorcycle point of view. View detail
Fits: HONDA VTR250, HONDA VFR750F, HONDA VT250SPADA, HONDA VFR400Z, HONDA VFR400R, HONDA DYLAN125(Reimport), HONDA DYLAN150(Reimport), HONDA FJS600SILVERWING, HONDA GIORNO CREA/DELUXE, HONDA HORNET600/S, HONDA HORNET, HONDA JADE250/S, HONDA VFR1200X, HONDA VF750C, HONDA VARADERO125(Reimport), HONDA V-TWIN MAGNA250/S, HONDA ST1100/A PAN EUROPEAN, HONDA SMART DIO/DELUXE/Z4, HONDA SILVERWING600/ABS, HONDA SILVERWING400/ABS
good
A friend of mine had a problem with his motorcycle not starting and not blowing well, so he consulted us and we looked at the plug and found that the electrodes were large and strange. He was happy to see that after the replacement, the blowing was much better. He was very happy to see that the car started and blew much better after replacing the electrodes. View detail
Fits: HONDA SH125, HONDA SH150, HONDA VFR750, HONDA Claire Skoopy., HONDA Claire Scoopy i, HONDA Clare Scoopy i-Special, HONDA Claire Scoopy Special, HONDA Shadow 125, KYMCO Venox 250, HONDA AX-1, HONDA CB-1, HONDA CB400 Super Four Version S, HONDA CB400 Fore, HONDA CB500, HONDA CB500S, HONDA CB900 Hornet, HONDA CBF1000, HONDA CBR400RR, HONDA CBR600F, HONDA CRF150R
cheap
I am in the process of refreshing the entire used car with 40000 km of unknown maintenance history, but it was beautifully dead. I was impressed that the engine was running so well, but the engine was not difficult to start and was running normally, so I thought it was NGK. After replacing the engine with the new one, the fuel consumption slightly improved and the engine started to blow up better. 40000kmPlug seems to have been without replacement. Recently, Windshield IRIDIUM, MotoDXPlug, etc. have come out, but I don't think I can feel the price/effectiveness, and it is impossible for me to feel 2.3% increase in fuel efficiency, although it is written in the homepage. It may look like there is a difference on the GraphMagic, but in reality, the difference is only 0.2 seconds, so be careful not to be fooled by the GraphMagic. The price is high, and I think a normal plug is sufficient. Just replacing a regular plug that has deteriorated will make a considerable difference. I have heard that Windshield IRIDIUM is good for high-revving engines, and I would like to replace it with a higher grade plug such as MotoDX or Windshield IRIDIUM. I want one so bad lol. View detail
Fits: HONDA SH125, HONDA SH150, HONDA VFR750, HONDA Claire Skoopy., HONDA Claire Scoopy i, HONDA Clare Scoopy i-Special, HONDA Claire Scoopy Special, HONDA Shadow 125, KYMCO Venox 250, HONDA AX-1, HONDA CB-1, HONDA CB400 Super Four Version S, HONDA CB400 Fore, HONDA CB500, HONDA CB500S, HONDA CB900 Hornet, HONDA CBF1000, HONDA CBR400RR, HONDA CBR600F, HONDA CRF150R
Cospa is good
Standard Type is sufficient as it is replaced regularly.
I used to use the expensive Plug but I can't tell the difference in blowing up. I think this one is better in terms of cost-effectiveness.
View detail
Fits: HONDA Broad (BROAD), HONDA CABINA (CABINA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY (SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY(SCOOPY CREA), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i (SCOOPY CREA i), HONDA crea SCOOPY i Special (SCOOPY CREA i SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA crea SCOOPY・Special (SCOOPY CREA SPECIAL Knife), HONDA Dio (DIO), HONDA Dio (DIO)
Same as OEM Product etc.
No different from OEM Product. And durability?
There is no cosmetic Merit as the price is the same.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA MATE NEWS80, YAMAHA MATE NEWS 50, YAMAHA TOWN MATE80, YAMAHA MATE, YAMAHA SUPER JOGZ, YAMAHA JOG TRUNKSpec., YAMAHA JOGSporty, YAMAHA JOG SPORTS90, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOG Z, YAMAHA JOG, YAMAHA AxisTrunkSpec., YAMAHA Axis, YAMAHA YB50, YAMAHA Vino, YAMAHA V80MATE80, YAMAHA V80MATE50, YAMAHA PW50
Compact
The fabric is thin, so when you fold it up, you can see
Very Compact.
I still need to use it to see how durable it is.
I don't know.
View detail